2nd International Conference on Composites: Characterization, Fabrication and Application, دی ماه ۱۳۸۹

Accepted papers in 2nd International Conference on Composites: Characterization, Fabrication and Application

• Preparation and Tack Characterization of Glass/Phenolic Prepregs

• Flutter & Divergence Based Optimization of Laminated Composite Plates under Combined Loadings

• Modal Analysis of Composite Lattice Plate

• Influence of Nanolayered Silicates on Properties of Wood Flour-Polypropylene Nanocomposites

• Investigation in to damage pattern and extension of unsaturated resin/glass fiber nanocomposite reinforced by nanoclay

• Experimental and Numerical Investigation of Mixed- Mode Interlaminar Fracture of Carbon-Polyester Composite Using Arcan Specimen

• Buckling Analysis of Micro- and Nano-Beams Based on Nonlocal Euler Beam Theory using Chebyshev Polynomials

• Matrix Crack and Delamination Analyses in Composite Laminates by FEM Based Micromechanical Approach

• Application of Solid-like Interface Element in Delamination Growth Analysis Under Cyclic Loading

• Dynamic anti-plane deformation of an orthotropic wedge with viscous damping

• Development of a Full Range Multi-scale Model to Obtain Elastic Properties of CNT/Polymer Composites

• stress wave propagation analysis of lightweight composites

• Optimum Design of Composite Laminates for Strength and Stability

• Wavelet-based Acoustic Emission monitoring of composite materials damage under quasi-static 3-point bending test

• Experimental study on fracture behavior of rubber-toughened epoxy in bulk and laminated composite specimens

• Indentation of a Functionally Graded Plate by a Rigid Spherical Indenter

• Study the Effect of Aramid Fibers on Mechanical and Tribological Properties of Polyacetal

• Natural frequency & Shape Mode of Isotropic and FGM Plates Using First-Order Shear Deformation Theory with Finite Element Method and Investigation of Rotation of the Line of Nodes of Vibration

• Structural and mechanical properties of epoxy resin/jeffamine-D400 reinforced by multiwall carbon nanotubes

• A New Simple Approach Analysis for Free Vibration of Laminated Plates

• Microstructure and hardness properties of composite layers fabricated by TIG surface alloying of Ti-5Al-2.5Sn with titanium and graphite mixed powders

• In situ formation of titanium carbide-reinforced titanium composite layers

• NANOCOMPOSITES BASED ON COMPATIBILIZED TERNARY BLENDS OF PP/EPDM/PA6: Microstructure

• Thermoplastic Elastomer Nanocomposites Based on PP/EPDM/Cloisite 15A

• Undesirable Sudden Curing of Epoxy/Clay Nano-composites in VARTM Manufacturing Process

• Analytical and Numerical Investigation of the Axi-symmetric Extrusion of Bi-metallic Tubes

• Preparation of SiC Nanowires by Carbothermal Reduction from Carbon Nanofiber Templates

• Buckling Analysis of Moderately Thick FGM Plates using the Finite Strip Method

• Prediction of Fiber Glass Orientation after Hot Rolling Process of Polymer Composite by Finite Element Modeling

• Fabrication and Characterization of Hydroxyapatite/Chitosan-Gelatin Nanocomposite Bone Tissue Engineering Scaffold

• Comparative Thermal Conductivity Modeling of TiO2/Germanium Nanocomposites

• 2D and 3D Interlaminar Fracture Evaluation of Unidirectional Carbon/Epoxy Arcan Specimens

• The role of silicon compounds in strengthen and density of Aluminasilicate based materials composites

• Two dimensional wave propagation in thick short length FGM cylinders

• Experimental Study on the Extrusion of Wood Plastic Composite Foam: Observation of Variations of Weight, Density, Cost and Strength

• CURING BEHAVIOR, KINETICS AND MORPHOLOGY OF HOT CURED UNSATURATED POLYESTER/NANO-CLAY NANOCOMPOSITE RESIN WITH DUAL INITIATORS

• A Study on the fracture behavior of polyethylene/calcium carbonate nanocomposites using the essential work of fracture (EWF) method

• Investigation on Microstructure of Transient Liquid Phase Diffusion Bonded Joints of Al/Mg2Si Metal Matrix Composite

• Fabrication and tribological behavior of electroless Ni-P-CNT composite coating

• Characterization of a Smart Nitinol/Silicone Rubber Composite for using in Soft Tissue Replacements

• Improving the hardness and wear resistance of magnesium alloys by TIG composite surfacing with Al+Al2O3

• Synthesis of alumina-mullite nanopowder using AlCl3.6H2O & colloidal silica via Sol–gel method

• Buckling of Piezoelectric Functionally Graded Material Beams

• Application of Composite Theories for Modeling Tensile Modulus of PP/Nanoclay/CaCO3 Hybrid Nanocomposite

• PP/Nanoclay/CaCO3 Ternary Nanocomposite: A Review

• Investigation on effects of sic nanoparticles and nanowhiskers on mechanical properties of sic/epoxy nanocomposites

• SEA and Analytical model of sound transmission loss through Sandwiches Shells lined with poroelastic materials

• Axisymmetric Dynamic Analysis of Functionally Graded Material Cylinders by a Mesh-free Method

• Microstructure and Mechanical Properties of Al/Ni Composite Sheets Produced by Accumulative Roll Bonding (ARB)

• Axisymmetric Static Analysis of Functionally Graded Material Cylinders by a Mesh-Free Method

• Local Buckling Analysis of Rectangular and Longitudinally Stiffened Functionally Graded Plates using the Finite Strip Method

• Application of new type of advanced composites: nano core shell composites

• new analytical-numerical design approach for composite landing gears of light aircrafts

• The effect of silane crosslinking on the physical properties of high density polyethylene/wood flour composites

• Investigation of effect of ball milling and functionalizing on electrical, thermal and Mechanical properties of phenolic resin/MWCNT composite

• Synthesis, characterization and electrochemical testing of zirconia-10 mol% alumina nanocomposite thin films on the 316L stainless steel substrate via a sol-gel process

• simple model for simulation of mode I strain energy release rate of a rectangular laminated composite

• Construction of Composite Polymer Bipolar Plate for Fuel Cell

• Morphology and creep behavior of LDPE/CaCO3 nanocomposites

• Evaluation of Physical and Mechanical Properties of Cu/Cr2O3 Nanocomposite Produced by Mechanical Alloying and Internal Oxidation

• Modeling and experimental characterization of compressive properties of 3D woven glass-fiber sandwich composites

• Microstructure and Mechanical Properties of Natural Rubber/Organoclay/NanoCalcium Carbonate Ternary Nanocomposites: Effect of Mixing Sequence

• An experimental study on the effect of mesoporous silica and nanoclay addition on the ionic conductivity of poly(ethylene oxide) solid electrolytes

• Electrodeposition of bronze-SiC composite coatings employing a non-cyanide solution

• A New Friction Stir Processing Method for Fabricating AZ91/SiC Nano-composite

• Utilizing Genetic Algorithm for Multiobjective Structural Optimization of Helicopter Rotor Blades

• Microstructure Characterization andMechanical Properties of Al-SiCp Composites

• Optimization for Minimum Mass of Composite Grid Stiffened Cylindrical Shells under Axial Compressive Load Based on Analytical and Graphical Methods

• Effect of Cut-out Orientation and Location on Stress Concentration Factor in a Composite Plate under Transverse Static Loading

• Investigation of Thermal conductivity and mechanical strength of carbon epoxy composites and aluminum reinforcer

• Fabrication of porous composite scaffold from poly(lactic-co-glycolic acid)/Hydroxyapatite coated with a biodegradable triblock copolymer

• Dynamic analysis of composite plates on the viscoelastic foundation subjected to moving oscillator using FSM

• numerical and experimental study on bending ability of glass fiber metal laminate composite

• Effect of Nanofillers on the properties and corrosion performance of epoxy composite coating

• Preparation of Cubic/Tetragonal Composite Electrolytes Through Stabilizer Coating Method Using Zirconia Polymeric Solution

• High Mechanical Properties of Electrocodeposited Cu-Al2O3 Nano Composite Coating

• Microstructures and Mechanical properties of 5052Al/Al2O3 surface composites fabricated by friction stir processing

• Effect of composite laminated layup on vibrational behavior of composite pipe containing flowing fluid

• Thermal Analysis of Repaired and Reinforced Steel Pipe with Composite Materials

• Influence of Bismuth Addition on the Microstructure and Mechanical Properties of Insitu Formed Mg/Mg2Si Composite

• Manufacture of armatureless reinforced concrete by using of carbon nanotubes composite and silica nanoparticles

• Corrosion resistance of electroless Ni-P-Al2O3 composite coating on low carbon steel in 3.5% sodium chloride solution

• Free Vibration Analysis of a Functionally Graded Piezoelectric Beam Based on Higher-order Beam Theory Using the Finite Fourier Transformation Method

• Optimization of sintering conditions for Al/SiC composites fabricated by PM method and the effect of holding time at high temperatures on composite properties

• Study of mechanical properties of pultruded polymer matrix composites (PMC) and the application of composite cross-arms in medium voltage power delivery lines

• Stress transfer modeling in viscoelastic polymer matrix composites with an internal damage

• Micro mechanisms of load transfer in a hybrid unidirectional fiber–reinforced epoxy composite with broken fibers

• Evaluation of Yield Strength of PLGA/nano-BCP Composite Scaffolds During In Vitro Degradation

• Study on Behavior of Squat Shear Wall Retrofitted with FRP Laminates

• Investigation of Delamination Failure Externally Bonded Shear FRP-Reinforcement

• The effect of mixing procedure on rheological properties of glass flake-epoxy vinyl ester composites

• Microstructural Examination of Al2O3-10vol.%SiCNano-composites Densified by pressure assisted sintering

• An Object Oriented Finite Element Method to Analyze Random Short Fiber Composites

• The influence of Boron on Properties of Al–15%Mg2Si in situ composite

• Low-Velocity Impact Response Analysis of Fibre-Metal Laminate (FML) Circular Cylindrical Shells Using A Simple New Contact Force Estimation Procedure

• Buckling Analysis of Composite Laminates with Through-The-Width Delamination Using a Novel Layerwise Theory

• Development of a Three Dimensional Finite Element for a Composite Layer Consisting of Adhesive Bonding

• Effect of addition of magnesium sulphate on strength development of Sorel cement- 20% SiC composite

• The Effect of Organoclay on the Mechanical Properties of Polymer Modified Bitumen

• Microcrystalline Cellulose as a Reinforcing Agent in Wood Plastic Composites

• Free Vibration of Simply Supported Rectangular Composite Plates with Patch Mass

• Load Capacity Assessment of a Braided Textile Composite Bone Plate under Combined Loading Using 3D-Finite Element

• Production of High Strength Al-Al2O3 Composite by Accumulative Roll Bonding

• Comparison between monotonic and fatigue loadings responses of CFRP retrofitted RC beams

• Inter-laminar stress consideration of lateral-torsional buckling of FRP-retrofitted steel-beam using first order shear deformation

• Analysis of Thick Laminated Composite Plates on Elastic Foundations by Exponential Basis Functions; A Meshfree Approach

• Sensitivity analysis for multi-layered piezoelectric micropump

• The effect of multi-walled carbon nanotube dimensions on mechanical properties of epoxy-based nanocomposites

• Fabrication of Epoxy/Multi-Walled Carbon Nanotube-Nanoclay Nanocomposites: Investigation of Fracture Toughness

• Bending- torsional flutter of a swept composite wing with an attached mass

• Analysis of the effect of stiffener shape and profile in composite isogrid stiffened shell under axial loading

• Detection of delamination in cross-ply composite laminated beams utilizing irregularity of mode shapes

• Bending analysis of laminated skew plates using extended Kantorovich method

• On the Reinforcement of Asphalt-Concrete Structures Using Poly Propylene Fibers

• A Study Based on the Use of Textiles from Worn Tires in Manufacturing FRP Composites and Decreasing Adverse Environmental Effects

• Elastic buckling of FGM cylindrical shell surrounded by an elastic foundation

• THERMAL CONDUCTIVITY OF FUNCTIONALIZED MULTI-WALLED CARBON NANOTUBE/EPOXY COMPOSITES

• Study of deposition, micro-hardness and wear resistance of electroless Ni-P-BN composite coatings

• Transient Response of a Double-Walled Cylindrical Structure Made of Functionally Graded Materials Filled Between Walls and Submerged in Fluid

• Experimental Effects of Various Parameters on Kink-Band Formation of Glass/Epoxy Laminates

• Multiwall Carbon Nanotube Application in Co-cured Adhesive Joints ofE-glass /epoxyLaminates and Al- 2024-T3

• Effect of Nanoclay particles in composites made via resin infusion process

• Feasibility study of porous Fe-Al2O3 composite fabrication through combination of SPS and SHS processes

• The effect of direct and pulse current on the Ni-WC nanocomposite coatings and evaluating its wear behaviour

• Approximate Torsional Analysis of Multi-layered Tubes with Non-circular Cross-sections

• The Study of Mode II Delamination on Glass/Epoxy Composite Materials by Acoustic Emission

• Investigation of Composite Membranes by Developing Mesoporous Alumina Layer on Stainless Steel Substrate

• B4C nanowire reinforcements Synthesis from carbon template

• The optimization of a gypsum based Nanocomposite material for extrusion

• Synthesis and characterization of ZrO2–MgAl2O4 nanocomposite powder by a novel chemical route

• A Dynamic Finite Element for the Free Vibration Analysis of Nonuniform Extension-Torsion Coupled Composite Box-Beams

• Synthesis of Ni-Cu Nanocoating by Mechanical Alloying Method on Ni Balls

• Preparation of nylon-6/TiO2 nanofiber composite via electrospinning as a novel humidity sensor

• Investigation of mechanical properties of clay/epoxy nanocomposites

• Flow Behavior of Al Matrix Composite Reinforced by Iron Based (20% Cr- 30%Ni) Fibers during Equal Channel Angular Pressing

• Prediction the Temperature-Dependent Thermo-Physical Properties of Elastomeric Composite at High Temperature

• Analyzing elastic properties of sandwich panels with cellular cores made of composite laminates

• Damage detection in a composite plate using modal analysis and artificial intelligence

• Effects of adhesive thickness and its dynamic disbond on fatigue performance of cracked aluminium panels repaired with adhesively bonded composite patches

• ROOM TEMPERATURE STUDY OF A LOW PROFILEED UNSATURATED POLYESTER RESIN

• Synthesis and characterization of nano composite of minoxidil-zinc oxide

• Fabrication of polymer-piezoceramic composites

• Structure and Glass Transition Temperature of PMMA/Clay nanocomposites synthesized through in situ-Reversible Addition- Fragmentation Transfer (RAFT) Polymerization

• Fabrication of Composite Electrodeposited Sn-Sb on Carbon Nanofiber Anode Material for Lithium Ion Batteries

• Formation and Characterization of Ni-P-CNT Composite Coatings For Solar Absorber Application

• Numerical investigation of micro-buckling failure mode in composite materials

• Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites

• Fabrication of aluminum based composite foam by PM route using the blowing agent CaCO3

• Plastic Shrinkage Cracking and Workability of Fibers SCC Composite

• Effect of Fibers Addition and nano colloidal on Mechanical Properties of SCC Composite

• Forced Vibration Analysis of Cross-Ply Laminated Plates Using a Layerwise Theory

• Analytical Solution for Two-Dimensional Dynamic Response Analysis of Functionally Graded Thick Hollow Cylinder with Finite Length Subjected to Impact Loading

• The effects of TiB2 particle volume fraction on the hot workability of TiB2/AA 2024 composites

• Synthesis of Mo–Si–B nanocomposite powders by mechanical alloying and subsequent heat treatment

• Vibration of Sandwich Beams with ER Core and Laminated Faces

• Effect of Inlet Tube Dimensions on VARTM Mold Filling Time

• Synthesis of particulate in situ Aluminium-Alumina composite by using aluminothermic reactions

• Comparison of structure and properties of nano silica particles fabricated from rice husk by Chemical and thermal methods

• Combined Electrical and Thermal Percolation Threshold in Single/Multi Walled Carbon Nanotube Polymer-Matrix Composites

• Mechanism and Kinetic Modeling of Photodegradation of Polymer-based Composites in Aqueous Solution

• Experimental Study of Wear Behavior in Polyacetal(POM)/Clay Nanocomposite Gears

• An Analytical and Numerical Investigation of Stiffness Matrix of Different Lattice Grids in Advanced Grid Stiffened Composite Structures

• Fatigue Damage and Life Assessment of Al6061/Al2O3 and Al6061/SiC PMM Composites under various Loading Conditions

• Effect of Different Boundary Conditions and Materials on Smart Composites

• The investigation on the role of nano sized calcium carbonate particles in a MDPE on its resistant against perforation

• Effect of fiber acid treatment on the dynamic mechanical properties of unsaturated polyester/carbon fiber unidirectional composites

• Fabrication and Characterization of Carbon Nanofiber Hybrid Laminates

• Preparation of NiP-TiO2 Nano-Composite Coatings by Electroless Method and Investigating their Properties

• Investigation of effective parameters on dynamic behavior of laminated a sandwich plate with composite skins

• Electrical conductivity activation energy of cobalt-composite-coated interconnects used in solid oxide fuel cell

• Numerical Simulation of the R/C Beams Strengthened by FRP Strips by NSM Method

• Production and characterization of nanostructured (FeCoNb)WC composite powder

• Modified nanosilica/ HDPE-g-MA coating on steel by cast-solution method: Superhydrophobicity and corrosion resistance

• Production of Nanoclay from a raw Montmorillonite sample

• Stress Analysis of Grid Cylindrical Composite Shells under Axial Compression

• Reclamation of metal matrix composite scraps and production of cellular composite materials

• Effect of Aging Time on Synthesis of Sol-Gel Derived Bioglass-58S Nanopowders

• Improvement of the interfacial adhesion of epoxy/UHMWPE fiber composites by grafting of GMA on the fiber

• Thermal and impact study of PP/PET fiber composites compatibilized with Glycidyl Methacrylate and Maleic Anhydride

• Computational Investigation of Delamination in T-shaped Laminated Composite Components

• Numerical Analysis of Steel HSS Beam-Column Retrofitted with CFRP

• Studying Mechanical Response of Aligned Silver Nano-Composites Using Hybrid Molecular Dynamics-Finite Element Modeling

• Synthesis of titania nanoparticles using a nonionic water-in-oil microemulsion

• The effect of Nb addition on nanostructured NiTi intermetallic compound synthesized by mechanical alloying

• Synthesis nanacomposite Ag/ZnO via coprecipitation method

• Effect of Carbide particles on tribological properties of phenolic resin

• Synthesis of Red Pearlescent Pigments based on Nano Hematite and Muscovite by Sol-Gel Method

• The Application of Single Wall Carbon Nanotube to Synthesis Glucose Biosensor

• Effects of sulfite waste fibers incorporating silica nano-particles on mechanical and microstructural properties of cementitious composite

• The effect of adding nano size clay particles on the dimensional characteristic of POM composite gears

• Effect of mineralizer on the synthesis of silica- hematite nano composite

• Crystallization Behavior in Interface of Flouromica-Diopside Glass-Ceramic Composits

• Investigation of the Microstructure and Wear Behavior of In-Situ High Chromium Steel/TiC Composites

• Aeroelastic Stability of Supersonic Composite Fins Considering Thickness Effect

• Structural evolution of Al and Al-10Mg matrix nanocomposites reinforced with Al2O3 particles during high-energy ball milling

• Micromechanical modeling to analyze the reinforcing efficiency of carbon nanotube and high structure carbon black on the mechanical properties of styrene-butadienerubber

• Ballistic Impact Perforation into GLARE Targets Part I: Experiments and Numerical Modeling

• Ballistic Impact Perforation into GLARE Targets, Part II: Target Optimization

• Tribological Behavior of TiN/Al Nano-composite Surface Layer Fabricated by Friction Stir Processing

• Application and performance of composite materials

• Experimental Study on Effect of the Matrix Melt Flow Behavior on Physical and Mechanical Properties of Extruded Wood-HDPE Composites

• Plasma Spray Spinel-MgO Composite Coatings on Steel Substrate

• Investigation of Strengthening of Reinforced Concrete Members with FRP Composites in Lab

• Transient Liquid Phase Diffusion Bonding of Al A356/SiC Metal Matrix Composite Using Cu interlayer

• Polymeric Nanocomposite Membranes as High-Performance Materials for Fuel Cells Applications

• Synthesis and structure evaluation of MoSi2 – Mo5Si3 composite

• An Experimental Investigation on Physical and Mechanical Properties of WPC Extruded Profiles

• Optimal Design of Laminated Composites

• Damage Assessment of CFRP Composites of [90/±45/0]s Layup based on Stiffness Degradation over Fatigue Stress Cycles

• Temperature Effect on Monotonic Strength of FRP Composite Laminates with Various Lay-ups

• Dynamic Analysis of the Metal and Composite Aerobatic Wing Box-Initial Aeroelastic Investigations

• A Novel Model for Simulation of Glass/Polyester Pultrusion Process

• STUDY THE EFFECT OF STACKING SEQUENCE ON DELAMINATION MODE AT FREE-EDGE LAMINATED PLATE USING FEM

• SCIENCE AND TECHNOLOGY OF THERMOSET PREPREGS

• Microcellular Composites

• Buckling of a Laminated Column with Transverse Crack

• Aeroelastic Instability Analysis of a Double-Tapered Composite Wing-Box Using Refined Dynamic Finite Elements

• Mechanical properties improvement of wheat straw composite panels via silan treatment and using amino-resins