14th International Oil, Gas and Petrochemical Congress, اردیبهشت ماه ۱۳۸۹

Accepted papers in 14th International Oil, Gas and Petrochemical Congress

• 3D Integrated static modeling using geostatistical methods in Asmari reservoir. Marun oil filed , iran

• A Comparison of Geolog Software and Neural Network for Predicting reservoirs properties in X oil field located in south-west of Iran

• A Fast Method for Productivity Index Calculation of Vertical Wells in a Gas condensate reservoir

• A Literature Survey of RSD’s Laboratory Applications in Drilling Industry

• A Novel Approach For Solving Diffusivity Equation In Cases; Wellbore Storage and Phase Redistribution Phenomena

• A novel geomechanical analytic method for preventing casing failure occurrence

• A Case Study to Evaluate the Role of Basiluses in Producing Biosurfactant and the Feasibility of Microbiologic Enhanced Oil Recovery of Asmari Reservoir in Bibi-Hakimeh Oilfield

• Acid Fracturing in Iranian Oil Fields

• Advances in seismic data processing

• An Efficient and Robust Saturation Pressure Calculation Algorithm for Petroleum Reservoir Fluids Using Neural Network

• Application Geostatistical 3D modeling in determination of apt regions oil fields (case study; Azadegan oil field)

• Application of Simulated Annealing Technique to Non-Linear Optimization of PC-SAFT for Petroleum Reservoir Fluids

• Application of Smart Technology for Production Optimisation in Oil Fields

• Asphaltene Deposition and Formation Damage During CO2/ Hydrocarbon Gas injection projects for Enhanced Oil Recovery (EOR)

• Changes in Reservoir Quality Determined from the Diagenetic Evolution of Cretaceous Carbonates: Case Study from Sarvak and Ilam Formations in the Lurestan Area, SW Iran

• Constraining 3D Facies Model to Trend Maps to Improve Reservoir Porosity Modeling

• Detection of thin layers with CWT method in one of the southern oil fields of Iran

• Determination of Minimum Miscibility Pressure in Gas Injection Process by Mixing Rules

• Diagenetic controls on reservoir quality in the Asmari carbonate reservoir in Gachsaran Field, SW Iran

• Diffusion Process in Reservoir Fluids in Gas Injection Projects

• Economic Evaluation of Smart Well Technology-A case Study

• Effect of key parameters in rapid expansion supercritical solution process on the structure of drilling mud viscosifiers

• EOR screening using artificial intelligence Bayesian network

• Estimating Total Organic Carbon Content and Source Rock Evaluation,applying log R and neural network methods -ahwaz and marun oil fields , Swof iran

• Experimental investigation of Henna powder as a novel additive to the drilling fluid

• Geochemical Evaluation of oils and possible source rocks in oil fields located in the west margin of qatar - kazerun fault

• Identification of Thermogenic and Microbial Gases in Polish Part of the Carpathian Petroleum Province Based on Isotopic Data

• Investigating The Effect of SDS Surfactant and a biosurfactant-producing bacterium MR01, on IFT in Iranian Carbonate Reservoirs

• Nanotechnology solutions for petroleum upstream technological problems

• Novel Approach to Address Carbonate Evaluation Problems of Ahwaz Bangestan Reservoir Using Cyclolog Software

• Pars Reservoir Simulator - Automatic History Matching Technology

• Precise Prediction of BHCP by Neural Network Modeling

• P-wave velocity prediction via seismic data using seismic attributes

• Risk Assessment in Reservoir Management under Uncertainty

• Sequence stratigraphy and basin evolution of Miocene deposit in Northwest of Central Iran

• Simulation model Validation of an Exploration Gas Field Using Drill Stem Test Data

• Study of Two-Phase Fluid Flow in Water-Wet Reservoir Rocks by Using X-Ray In-situ Saturation Monitoring

• THE ANALYSIS OF PETROLEUM SYSTEMS AS A TOOL FOR PRESENT AND FUTURE EXPLORATION EFFORTS

• The Application of Carbon Nano Tubes in Designing Heavy Weight Cement Slurry with High Elastic (flexural) Strength.

• The effect of drilling mud flow on the lateral and axial vibrations of drill string

• The Necessity of Adopting a Culture Of Formation Damage Awareness

• Uncertainty analysis associates with reservoir management-A case study from an Iranian Carbonate Reservoir

• Unconventional Hydrocarbon reserves

• Validation of Methods to Calculate Gas-Oil Relative Permeability Using Capillary Pressure Data from South Pars Reservoir

• Water Flooding Optimization Using Streamline Simulation

• Wettability alteration of mica and sandstone by a biosurfactant-producing bacterium Bacillus thermodenitrificans SUCPM-23, isolated from an oil reservoir

• Smart Oil & Gas Digital Fields

• A New Tertiary Steam Flood Strategy Case Study for an Extra-Heavy Iranian Oil Reservoir

• A Thermodynamic Model for Prediction of Asphaltene Precipitation from Crude Oils

• Acidizing jobs Evaluation by well testing analysis in Asmari reservoir of Marun oil filed

• Application of fluid inclusion to recognition of origin of coarse-crystalline calcite and dolomite cements in Permo-Triassic Kangan and Dalan Formations in South Pars Field, Iran.

• Application of velocity-deviation log to Reservoir Characterization of Asmari Formation in One of the Iranian Oil Fields

• Combination of capillary pressure and hydraulic flow units for estimation of irreducible water saturation in carbonate hydrocarbon reservoir

• Completion Optimization And It’s Effects To Increase The Wellhead Pressure And Production Rate Of The Wells

• Condensate controlling with optimum flow rate determination and new equation of pressure drop of gas condensate reservoirs

• Crisis management in kill well with drilling relief wells with case study in Iran and the other country

• Depositional environment, microfacies and diagenesis of Surmeh Formation in Kohrang Area, High Zagros zone, SW Iran.

• Detection of Boundary Layers Using Wavelet Transform

• Determination of the conditions of natural gas hydrate formation using Neural Network

• Determination of water saturation parameters in a complex carbonate reservoir

• Developing and Interpretation of a novel Temperature Distribution Model in Wells with Multi Pay Zones

• Evaluation of Acidizing Performance Using Well Testing Analysis in Asmari Reservoir of Marun Oil Filed

• Evaluation of Pabdeh and Gurpi Formations in Kabir Kuh for Hydrocarbon Potentiality: Using Source Hound Analyzer

• Fault Detection Using Ant-tracking Attribute in One of Southern Offshore Iranian Fields and Comparison with Other Related Attributes.

• Feasibility of Managed Pressure Drilling (MPD) in Iranian Fields;

• Hybrid method of genetic algorithm and artificial neural network for PEF and CGR logs prediction in one of fracture reservoir in south iran

• Hydraulic Fracturing Design and Investigation Cumulative Production in One of Iranian Gas Condensate Reservoirs

• Investigating Petrophysical and Drilling Differences of Side-track and Main Well (Case Study Well NO. 250 of the Marun Oil Field)

• Investigation and Feasibility of Underbalanced Drilling at Fractured Formations; Case Study: Field-A in South of Iran

• Investigation of Formation damage Based to Additions of Oil Based Mud; Laboratory Study

• Investigation of scale formation during injection of sea water into oil fields

• Investigation of the N2 impurity in CO2 gas injection

• Investigation of Various factors on Relative Permeability Curves in a Low-Permeability Carbonate Reservoir of Iran

• Investigation of watercut effect on Precipitation (Wax, Asphaltene) in One of The Heavy Oil Field of Iran

• Investigation on filling history of hydrocarbons in Oil-bearing layers of South Pars Field, Persian Gulf

• Is phenomenon of collapse in casing and tubing predictable, or not? What should we do to reduce cost of this phenomenon? With case study of Iran.

• Laboratory Investigation of thermally assisted GOGD process for Depleted fractured carbonate reservoirs

• Microfacies and Original Mineralogy in Ilam Formation based on geochemistry and isotopical studies in type section, payun anticline and DA#a

• Modeling of Asphaltene Precipitation in one Iranian Field

• Multiphase Flow Meters: Technology and Applications in Upstream Oil and Gas Industry

• New Planktonic Foraminiferal Assemblages from the K/T Boundary in the Lurestan area, Zagros Basin, SW Iran: A Preliminary Report

• Optimizing Gas Lift Production of One of Oil Wells in Aghajari Field

• microfacies original mineralogy in ilam formation based on geochemistry and lsotopical studies in type section T payun anticline and da #a

• Pore Network Modeling and Simulation for studying the effect of heterogeneities on Miscible Displacement

• Porosity and Permeability Prediction Using Artificial Neural Network based on Flow Zone Index in an Iranian Heterogeneous Carbonate Reservoir

• Prediction of Permeability Decline duo to the Formation of Barium Sulfate Scale Using Artificial Neural Network

• Production Performance Analysis and Field Development Plan in an oil field in the west of Australia

• An investigation of industrial desalting process based on artificial neural network

• Reservoir characterization based on Conventional logs, CMR tool and comparison with Core data in Sarvak Formation

• Seismic identification of channels in the Bangestan group in an oil field in south-west Iran

• Selection of Optimized Sand Control Completion in Iranian Sandstone Reservoirs

• Simulation and Optimization of Multiple Bit Runs to minimize cost per foot

• Simulation and Study of Effective Parameters in Immiscible Water Alternating Gas (IWAG)

• Simulation of Convection Process during Miscible Gas Injection in Naturally Fractured Reservoirs

• Simulation study and comparison of gas and water injection in a typical fractured reservoir

• Simulation Study of Water Alternating Gas Injection (WAG) in an iranian fractured reservoir

• Smart Well: a Robust Tool in Reservoir Management of Fractured Reservoirs

• Statistical Analysis of fractures and the investigation relative of effects of reservoir parameters by fracture modeling in one of the South west oli fields of Iran

• steady-state flow tretment of co2 froth

• Study of Various Injection Patterns in Water, Gas and WAG Injection Methods in an Iranian Fractured Reservoir

• The Effect of Temperature, Pressure and Mixing Ratio of Injection Water with formation water on strontium sulfate scale formation in siri oilfield using OLI scale chem software

• The effect of well stimulation using different acidization methods on the productivity index of productive wells on one of the Bangestan reservoirs

• The field scale and economical investigation of water coning phenomenon

• The investigation of transport mechanisms in naturally-fractured gas condensate reservoirs

• The New Generation Of Drilling Cost Optimization By Simulation

• The New Method Of Directional Drilling By Non-Rotating Adjustable Stabilizer/ Directional Solution (NAS/DS)

• The Role of Geomechanical Model in Finding Optimum Roller Cone Bit for Drilling of Asmari Formation

• Use of Genetic Programming for Predicting Two Phase Inflow performance relationship of oil wells

• Using Vp/Vs Ratio to Predict Fluid Type in oil reservoirs a case study from an oil field, southwest of iran

• Utilizing Mechanical Earth Modeling Decreases Drilling Operation Cost in Iranian Oilfields

• Viscoelastic properties of sulfonated polyacrylamide/chromium triacetate Polymer Gels

• What do we do in a gas blow out with a case study in Iran and the other countries?

• Modeling of H2S Absorption by Iron Chelate Aqueous Solution in a Turbulent Contact Absorber

• Optimization of the main process control parameters, in granulated sulfur plan in order to have max on spec product quality.

• A new approach for optimization of Benzene Alkylation process for production of ethylbenzene

• Amine gas sweetening system problems arising from amine replacement and solutions to improve system performance

• Development of a suitable model for crude oils and petroleum cuts optimum blending

• A new aspect of nanotechnology in oil and gas drilling fluids"

• Forming Sulfur Filter Cake Recovered from Sulfiran Process

• Parameter Estimation for Real Time Optimization (RTO) of hydro treating process

• An Experimental Investigation on Oxidative Desulfurization of Gas Condensate

• Synthesis of “Imogolite” Fibers

• Emulsion Polymerization of Styrene:simulation the effect of binary surfactant system on the particle size distribution

• NEMD Simulation Prediction for Rheological Behavior of linear long chain hydrocarbons

• Overview of the Natural Gas Sweetening Processes Used in the LNG Industry

• A feasibility study of producing NGH from raw gas

• Comparative study of methane adsorption on the multi-walled carbon nanotubes and granular activated carbons

• Methane Conversion to More Valued Products in a Corona Discharge Reactor. "Energy Evaluation"

• Effect of electronic properties of Carbon Nanotubes on the Activity, Selectivity and Lifetime of Fischer-Tropsch Co/CNTs Catalysts

• Experimental and Theoretical Study on the CH4 Adsorption by granular and microporous activated carbon

• Studying of Catalyst Deactivation in a Commercial Hydrocracking Process (ISOMAX)

• Influence of Heat Treatment on the Optical Properties of Nanocomposites as Catalysts included Oxide Pigments

• Hydrogen sulphide gas sensors based on multi walled carbon nanotube

• OXIDATIVE COUPLING OF METHANE TO ETHYLENE OVER PEROVSKITE CATALYSTS

• Numerical Investigation of performance and Emissions Characteristic in SI engines combustion chamber charged by Gasoline, LPG, CNG

• A new desulfurization process for gasoline by chloramine T

• Semi-Dynamic Energy Optimization of Hydrotreating Process

• Measurement of hydrogen storage on single wall carbon nanotube (SWCNT) adsorbent and determination of model isotherm

• Investigation of the solution electrical conductivity effect upon the synthesis of carbon nanotubes by arc discharge method

• A survey: optimization by evolutionary algorithms in refinery plants

• Preparation and properties of acid-treated CNT/waterborne polyurethane nanocomposites

• Modified Magnesium Oxide Nanoparticles for Oil and Gas Industry Usage

• A Structural Health Monitoring System for Storage Tanks by Using Fiber Optic Sensor

• Circular Dichroism (CD) Studies on the Interaction of Novel Vanadium(IV) and Copper(II) Schiff Base Complexes as Dye with Biological Carriers

• Lattice Strain Analysis on Nanocrystalline Iron Oxide Composites as Environmental Catalysts

• Optimization of process parameters in LPG treatment unit

• The Effect of Surface Modification on Stability of Bentonite Nanoclay particles in polyelectrolyte suspension

• Performance of ceramic membrane reactor for methane conversion to syngas

• Preparation and Properties of Barrier Films based on PA6/nanoclay

• Application of membrane in hydrogen purification

• Iodometric Back Titration Method for Hydrogen Sulfide Determination in Bitumen-Sulfur Mixtures

• MILD HYDROCRACKING TECHNOLOGY

• Adsorbed natural gas technology for gas storage: review

• Biocatalytic phenol removal from aqueous solutions: A bench and pilot-scale optimization in a flow reactor

• Benzene reduction in gasoline by pervaporation membrane system

• Dehydration of toluene by pervaporation using a composite membrane

• Biodesulfurization of sour gas using mixed culture originated from hot spring

• CFD Simulation of Heat Transfer with Reactions in Steam Reforming Reactor

• Experimental Study of Heavy Liquid Hydrocarbon Pyrolysis: Application of Neural Network to Predict the Main Product Yields

• Hydraulic Analysis of the Structured Packing Dualflow Tray by CFD

• How to avoid salt deposition and corrosion on metal surface in distillation columns

• Pressure Drop of MellapakPlus Structured Packing by CFD Analysis

• Structured Packings Hydrodynamics by CFD Analysis

• Study of the Using Associated Gas as Feed of LNG and GTL Units in Iran

• Study on rheological behavior of gels used for conformance control

• Effect of Flow imprower on pour point and rheological properties of Iranian waxy crude oil

• جستجو گری ارزش آفرینی دانش سازمانی بر پایه مدل چهار محوری شهاب

• Impact of nanoparticles for formation fines fixation and reduction of formation damage

• Continuous high-yield synthesis of carbon nanotubes by novel arc discharge set-up in liquid

• بررسی موردی افزایش تولید شرکت نفت فلات قاره با ادغام مهندسی دانش و نظام مدیریت کیفیت

• Modeling and Simulation for olefin production in amir kabir petrochemical

• Heat transfer preparation and characterization of nanofluid using alumina AL2O3 nano -particles

• Corrosion Behavior of 316L Stainless Steel in sulfate -reducing and iron -oxidizing bacteria solutions

• Synthesis of Aligned Carbon nanotube by Direct Current Plasma Enhanced Chemical Vapor Deposition (PECVD) System

• A simple and fast method for estimation of water content in alkanolamine solutions by refractometric method

• Short Contact Time Partial Oxidation of Methane over 1.5% Pt/Al2O3 catalyst washcoated on ceramic monolith

• Optimization of blow down stream in the stripping part of a petrochemical with mathematical modeling

• Studies and Experimental Analysis on Water Absorption into White Pea and Black Pea

• Studies and Experimental Analysis on Water Absorption into Several Kinds of Beans

• Numerical Investigation of Gas Injection in Reducing Skin Friction Drag in under water surface of oil tank

• A new approach to dearomatization of gasoline by ionic liquid and liquid -liquid extraction

• Renewable energy generation in natural gas pressure reduction stations

• Bioremediation:interaction of fungi and bacteria in oily soils

• Effect of WO3 nanoparticles sizes on Congo Red (azo dye) and Rhodamine B (cationic triaryl methane dye) photo degradation

• A Computer Aided Tool for the Simulation of the Hydrotreating Reactor for Real Time Refinery Operations Optimization

• INNOVATION & TECHNICAL MUTATIONS IN reciprocating pumps (glycol injection)

• Evidences of Light Olefins Production via Catalytic Cracking of Hydrocarbons over Modified Zeolites

• Effect of Component Ratio on the Reflectance and Colorimetric Properties of Nanocomposites included Nickel based Pigments as Catalysts

• Two phase modeling of carbon monoxide oxidation in a fluidized bed Reactor

• Preparation of LSCF Ceramic Tubular Membranes for Oxygen production

• Ammonia Removal from nitrogenous Industrial Waste Water using Iranian natural zeolite of clinoptilolite type

• An Improved Method of Combined Cycle Gas Turbine Performance Test

• Biodegradation of heavy crude oil by an efficient strain, ERCPPI-1

• Carbon Capture and Storage into Subsurface Reservoirs

• ‍Corrosion Protection Evaluation of Several Industrial Coatings used as internal liners in petroleum trnsmission pipelines

• Development of anticorrosion coatings by efflorescence of Nanotechnology in Oil & Gas Industry- A review

• Effect of TDS on Critical Flux in Treatment of High Saline Oily Water by Air-lift Side-Stream Membrane Bioreactor (ASMBR) System

• Effect of Morphology on the Corrosion Performance of Polypyrrole Conductive Coatings

• Environmental Risk Assessment of Pipelines

• imidazolium-based alkylsulfate ionic liquids and removal of sulfur content from model of gasoline

• Investigation of kinematic parameters during biodemetallization of light crude oil

• Make-up feed water treatment and quality control in steam boiler system

• Polyethylene coating with improved resistance to cathodic disbonding using surface chemical treatment with organosilanes

• Protection of mild steel (UNS G 1020) against microbial induced corrosion using biofilm- producing bacterium Bacillus sp. strain TB16.

• Removal of Pollutants in Water Media from Oil Activities by a New Combined Method

• Remove Toxic Gases such as H2S , Mercaptane befor entering Waste Water Treatment unit and increase Treatment Process Performance

• Simulation and CFD Analysis of heat pipe heat exchanger using Fluent to increase of the thermal efficiency

• Study of the effect of different synthesis parameters on the morphology and microstructure of polyaniline

• The application of HVOF and APS thermally sprayed NiTi intermetallic coatings in oil and gas industries corrosive enviroment

• Different engineering techniques of gas oil biodesulfurization

• Exploration Of Bimetallic Pt–Pd/C Nanoparticles As An Electrocatalyst For Oxygen Reduction Reaction

• Investigating effect of surface preparation treatment on occurrence of stress corrosion of a 316L Austenitic Stainless Steel in Magnesium Chloride Solution

• The necessity of energy optimization and fossil fuels replacement with the new energy sources:

• A MODEL FOR TECHNOLOGY CAPABILITY ASSESSMENT IN R&D CENTERS

• A National-Scope Achievement through Training Outsourcing

• A proposed structure for Commercialization Clinic case study : petrochemical research and technology company

• Business excellence in knowledge-based organizations

• Chemical Engineering Software and legal protection thereof

• Choosing and Implementing appropriate Process Maturity Reference model in Iranian Drilling Company’s Human Resource Management

• Designing a model for determining patent portfolio and commercialization in R&D centers

• Developing A Model For Capturing And Taxonomy Of R&D Program Managers’ Tacit Knowledge, Case Study In Ripi

• Energy Outlook and Technology Development: New Horizons

• Evaluation of Strategic Competencies of Researchers in the Iranian Research Institute of Petroleum Industry (RIPI) in the world class

• INVESTIGATION OF RECRUITING PROCESS OF GAS INDUSRTY from experts and managers viewpoint

• Investigation the Critical Success Factors of Knowledge Management case study ; iranian oil industry

• Key factors of knowledge Management Implementation in national iranian gas co.

• Knowledge Transferability scenarios and requirements special view on software activities

• New trends to Human Resource Management (HRM)

• Pathology of Talent Management in Iranian Oil and Gas Companies

• Petroleum Knowledge Management: Past Experiences for Future Initiations, A KM Case study iran oil industry 1946-1979

• Relationship between Intellectual Capital/ Knowledge Management and human system well-being; the case study in National Iranian Oil Product Distribution

• Strategic Policy Making for the future of Nanotechnology developments in Petroleum Industry by Priority Assessment Method

• The importance of confrontation with challenges of knowledge management in the industries of Iran

• THE VALUE OF KNOWLEDGE MANAGEMENT

• آموزش در سازمانهای دانش محورموردکاوی : سطوح مدیریان شرکت پژوهش و فناوری پتروشیمی

• ارائه مدل مناسب جهت تدوین استراتژی دانش در صنعت نفت

• افزایش سرمایه فکری در سازمان: بررسی نقش یادگیری سازمانی

• اندازه گیری و گزارش دهی سرمایه فکری مطالعه موردی در سازمان منطقه ویژه اقتصادی انرژی پارس

• بررسی ضرورت ها و کارکردهای تدوین استراتژی دانش در صنعت نفت

• بررسی تاثیر انواع نه گانه هوش بر یادگیری در سازمانهای یادگیرنده مطالعه موردی شرکت ملی صنایع پتروشیمی

• بررسی رابطه بین عوامل‌سازمانی (ساختار، فرهنگ) با عوامل فرآیندی مدیریت‌دانش در واحدهای ستادی شرکت ملی نفت ایران

• بررسی رابطه بیوریتم و رضایت شغلی کارکنان (مطالعه موردی - شرکت نارگان)

• بهبود ارزیابی عملکرد از طریق کارت امتیازی متوازن: مطالعه موردی شرکت ملی نفت ایران

• تدوین استراتژی تکنولوژی مطالعه موردی تدوین استراتژی تکنولوژی برای تکنولوژی مخازن هوشمند

• دشمنی با توانمندان و راهکارهای مقابله با آن

• شناسایی مولفه های نظام نگهداری منابع انسانی در صنعت نفت

• نقش رهبری هوشیار و فرصت جو در ارزش آفرینی سرمایههای فکری

• نقش مدیریت دانش دربهره وری پروژه های نفت گاز و پتروشیمی

• نو آوری و کارایی سازمان در پرتو مدیریت دانش

• کاربرد مدل سیستم سرمایه در تعیین جایگاه و سنجش حرکت به سوی دانایی محوری سازمانهای دولتی

• The Necessity of Using an Integrated Management Information System (MIS) in a Portfolio of Oil-Refineries Mega Projects

• Synthesis and characterization of NH4-P, a new Zeolite for post-Catalyzing the Claus Process Mahboobeh dashti Ardakan

• Biodiesel production from Euphorbia tirucalli

• Development of an innovative model for steady state detection in RTO loop

• Poly Ethylene Oxide Effect on Methane Hydrate Formation inhibition and stabilization

• Synthesis of high molecular weight polyacrylamide by inverse emulsion polymerization

• Fischer–Tropsch Synthesis: New reaction mechanism

• Topping Plant: An alternative approach for asphaltenic heavy crude oil processing

• Hydrocracking lumped kinetic model with catalyst deactivation in Arak refinery hydrocracker unit

• Real time optimization of methanol Reactor using evolutionary algorithm

• Preparation of Mixed Surface-Initiated and Free Polystyrene Nanocomposite via Atom Transfer Radical Polymerization

• Heavy oil and residue upgrading by HRH process

• الگوی ایجاد هماهنگی میان استراتژی‌های تکنولوژی

• روشی برای تبیین آموزه های تجربی در مدیران صنعت نفت