03rd Conference on Nanostructures, اسفند ماه ۱۳۸۸

Accepted papers in 03rd Conference on Nanostructures

• Mechano-chemical synthesis of NiAl-TiC nanostructure powder

• Mesoporous Aluminosilicate as Effective Adsorbent for Radionuclides and Toxic Metal Ions

• Formation of MoSi2-CrSi2 Nanocomposite Powder by milling and Following heat treatment

• Synthesis and characterization of silver nanowires in nano-size mesoporous MCM-41 silica template by chemical reduction method

• Investigation of defect related luminescence of Ti doped ZnO Nanoparticles

• Preparation and electrical properties of nano composites with poly aniline-co-butyl 3 amino benzoate) nano particles

• Absorption of Diazinon and Fenitrothion Pesticides by Nano-size Alumina and Magnesia Prepared by Sol-gel Method

• Ionic-liquid-assisted synthesis and characterization of organic /inorganic hybride materials base on polyaniline/Y2O3 nanocomposite

• Synthesis of Ag/PMMA nanocomposite by gamma irradiation

• Synthesis and Characterization of Linear-Dendritic Macromolecules as the New Reducing Agents and Biocompatible Nanocarriers

• Synthesis of Self-healing Nanocoatings for Corrosion Protection

• Carbon Nanoparticles by Pulsed Direct Current Plasma Enhanced Chemical Vapor Deposition

• Preparation and Characterization of Silicon Nanoparticles by Laser Ablation in Ethanol

• mmobilization of Co+2, Mn+2, Pd+2 nanocatalysis on modified bentonite an application of them for selective oxidation of ethylbenzene to acetophenone

• MA behavior of Fe-Al-Ti system to produce nanocrystalline (Fe,Ti)3Al intermetallic compound

• New Method for Synthesis of Mg-Fe and Cu-Al Layered Double Hydroxides and Structural Characterization of Nanoparticles

• Load Transfer Efficiency in CNT/Epoxy: A Parametric Study on The Effect of CNT Length and Non-bonded Interphase

• Radiolytic synthesis of gold based bimetallic nanoparticles for use in fuel cell catalysts

• Preparation of ZnO/ Poly(Methylstyrene-g-Chloromethyl styrene) nanocomposite by combination of in situ and NMRP polymerization methods

• In situ chemical oxidative graft polymerization of aniline form magnetire nanoparticles

• Structural characterisation and thermal properties of exfoliated syndiotactic polystyrene grafted atactic polystyrene/Mg-Al layered double hydroxide nanocomposites prepared via solution intercalation

• Preparation and characterization of poly(styrene-co-methyl styrene)-g-aniline/ clay nanocomposites

• New Heat Treatment Method for Improving the Structure of Nanocrystalline Alloys

• Synthesis of Fe2O3@Co[Fe(CN6] nanoparticles for electrooxidation and sensitive detection of deferiprone

• reparation, characterization and analytical application of polymer-supported nano sized titania-silica binary oxide and nano sized TiO2-SiO2 as ion exchangers

• The effect of shape forming and sintering methods on properties of 8 mol%-Y2O3 stabilized nano structured zirconia bodies

• Chemical grafting of poly(vinyl acetate) onto montmorillonite 20A nano-particles

• Size and distribution of synthesized copper particles under ultrasound radiation

• Dehydration Kinetics and Mechanism of Polyvinyl Alcohol Nanocomposite Hydrogels Containing Hydrophilic Na-Montmorillonite Nanoclay

• Synthesis of Hexagonal nanometer-sized ZnO nanoparticles by a simple method

• Synthesis and characterization of Nano-bentonite by sonochemical method

• Synthesis and Characterization of Bionanocomposites Poly(urethane-imide)/TiO2 via Ultrasonic Process

• Unpresedented Fabrication of Novel Optically Active Polymer/Titania Nano Hybrid Films

• Ag/PMMA nanocomposite through reduction of silver ions by butylated hydroxytoluene

• Synthesis and characterization of conductive polyaniline-organoclay nanocomposites via one-pot in situ emulsion polymerization method

• Experimental study of the physical property of nano crystalline hydroxyapatite for orthopedic and dental applications

• Chemical surface modification of precipitated silica nanoparticles using 3-glycidoxypropyltrimethoxysilane by deposition from aqueous alcohol

• A comparative study on mechanical and adhesion properties of calcinated and non calcinated nanobioglass-titania nano composite coating on stainless steel substrates

• Optical properties of Copper-Copper oxide core-shell nanoparticles

• Synthesis and characterization of cis-WO2(acac)2 complex to nanoporous functionalized MCM-41 as selective catalyst for epoxidation of cyclooctene

• Study of phase transformations of TiO2/ZnO nanocomposites

• Effect of ZnO nanoparticles on the corrosion behaviour of epoxy polyaniline coatings on Aluminium

• Synthesis and characterization of Chlorine containing flame-retardant polyurethanes nanocomposite

• Comparison between Conductive polymer nanocomposites in the Removal of Phosphate Anion from Aqueous Media

• Ultrasonic assisted synthesis and characterization of ZnO and MgO nanoparticles and ZnO/MgO nanocomposite

• Fabrication of bulk nanostructure Al7075 alloy by mechanical alloying and hot pressing

• Fabrication of thiol functionalized nano hollow silica spheres by MPTMS

• Morphology, mechanical, structural, and thermal properties of hydrogenated nitrile rubber/hydroxy-functionalized multi-walled carbon nanotubes/ionic liquid composites: The effect of ionic liquid type

• Morphology, mechanical, structural, and thermal properties of hydrogenated nitrile rubber/hydroxy-functionalized multi-walled carbon nanotubes/ionic liquid composites: The effect of ionic liquid content

• Preparation and characterization of acrylic-based polyurethane/ nanosilica composite coatings

• An Investigation on the Microstructure and Mechanical Properties of Nanocomposites Based on NR/EPDM

• Calcination Process Effect on Phase Formation in Nano-Sized Zn0.9Mn0.1O Particles

• lyvinylpyrrolidone modified polyaniline /montmorillonte nanocomposite:Synthesis and characterization

• Physical and Photoelectrochemical Properties of Ce-doped ZnO Nanocomposite thin films

• Application of modified multiwalled carbon nanotubes as a sorbent for separation and preconcentration trace amounts of Pd(II) ions

• Properties of Nanocomposite Film of P(MMA/BA)-MMT-Na+ Synthesized by In-suit Emulsion Polymerization

• Effect of Processing Conditions of Melt Mixing in Properties of PVC/NBR Nanocomposite

• A new route to synthesis ofγ-alumina nanorods

• Sonochemically assisted synthesis of hollow spheres and lozenge-shape hollow prism ZnO nanostructure in acidic ionic liquids

• Kinetic investigation of Photocatalytic degradation of azo dye by zeolite-based nanocomposites

• Processing methodologies, characterization, morphology and mechanical properties of a hybrid bioactive nanocomposite as a novel 3D bioactive scaffold for bone tissue engineering

• Studies on preparation and characterization of sol-gel derived mesoporous bioactive glass nanopowders in the ternary system SiO2-CaO-P2O5

• Control & Determination of Nanoporous silica surface hydrophobicity by dye adsorption model

• ynthesis and structure of spinel-type oxides in Mn Co and Ni ternary system nanopowders at low temperature

• Nanoporous Hydrogel Based on Polysaccharide/ Protein Hybrid Backbone: Synthesis and Characterization

• Conducting Polyaniline/Natural Clinoptilolite Nanocomposite: Preparation and Characterization

• Synthesis of a New Alumina/Zirconia Nano Composite for Selective Dehydration of 1,2-Diphenyl-2-propanol in Presence of 2-Octanol

• Investigation the effect of conducting electrolyte on the characteristics of nano-structure aluminium oxide coatings produced via plasma electrolyte oxidation

• Preparation of silver colloids by laser ablation technique in water : influence of energy on the ablation efficiency

• Effect of Surfactant Concentration on Size and Morphology of Electrooxidated Fe3O4 Nanoparticles

• Preparation of Epoxy Nanocomposite from Carbon Nanotube Buckypaper

• Synthesis of functionalized SBA-15 as a nano sorbent for the removal of halophenols from aqueous media

• Synthesize and Characterization of Tin Oxide Nanowire Using Vapor-Liquid-Solid Technique

• Measurement of Elastic Modulus of Nanocomposite Materials using Atomic Force Spectroscopy

• Tribological behavior of Al-B4C Surface Nanocomposite Layers on 7075 Al Alloy Employing Friction Stir Processing

• Removal of 2,2-bipyridine from Wastewater using Modified Nanoporous Adsorbent

• Study on the formation mechanism of in-situ Cu (Mo)/Al2O3 nanocomposite

• Nanosize clay effects on morphology and kinetics of thermal degradation of PP/EPDM blends

• Preparation and Characterization of Nanoencapsulated NanoSilica Particles with Acrylic Coplymer

• Poly(methyl methacrylate)/ acid functionalized silica nanocomposite electrolytes for rechargeable lithium batteries

• Effect of surfactant PVP on codeposition of MoS2 nano-particles with electroless Ni-P coating

• High strength-high conductive Cu/Ag nanocomposite multilayer produced by ARB

• Multilayer synthesis of magnetite-based nanocomposites

• Microwave Synthesis and Characterization of SnO Nanocrystallites

• Cure kinetics of butyl rubber/clay nanocomposites

• Syntheses of In2O3 nanostructures by ultrasonic method and investigation its catalytically property in direct reduction amination

• Effect of micro and nano PbO2 particles on Zn-PbO2 primary battery performances

• Rheological Behavior of Phenoxy/Carbon Nanotube Composites:Assesment

• Preparation of nanocomposite membranes of propylsulfonated Poly[2,2'-(m-pyrazolidene)-5,5'-bibenzimidazole] / surface modified nanopartices as Proton Exchange Membrane for Fuel Cell Application

• The Influence of Different Surface Modification on the Morphology of Nanosilica Filled Polyamide 6 composites

• Dependence of Spectroscopy Properties of Copper Oxide into the Silica Support Nanocomposite on Temperature

• Palladium nanoparticle dispersion over the nanocrystalline WO3 through the reduction of PdCl2 by H2: characterization and gasochromic properties

• A new aqueos route for synthesizing selective size CdSe and core/shell CdSe/CdS Nanoparticles

• Morphology and mechanichal properties of Polyacrylonitrile (PAN) Multi Walled Carbon Nanotube (MWNT) nanocomposite electrospun fibers

• Aqueous Synthesis Of High Luminescence CdTe And CdTe/CdS Core_Shell Quantum Dots

• Nanostructured silver fibers: Facile synthesis based on natural cellulose and application to graphite composite electrode for oxygen reduction

• Co-electrophoretic deposition of TiO2 nanoparticulated hollow fibres/nanoparticles as crack reducers for dye-sensitized solar cell photoanodes

• Fractal Dimension Control of Hydroxyapatite Nanoparticles by a High Efficiency Sonication Method

• Sonochemical assisted synthesis of MnO2 nano-structure and its application in Li battery

• Magnetic Nanoparticle-Based Solid Phase Extraction of Oxadiargyl from aqueous samples

• Preparation of Layer Nano-Silicate / Alumina Castable Composites

• Synthesis and Optical Characterization of ZnO Nano-Structures Grown by Thermal Evaporation

• Thermo optical response in Ag and Au nano colloid prepared by laser ablation

• Thermoplastic Polyurethane/ Polypropylene/ Fumed Silica Nanocomposites:Investigation on Effects of Blend Composition and Nanoparticle Types on Thermo-Mechanical Properties of Final Mixture

• The effect of Al containing nano size silicate (Al-HMS) as support of catalyst in the catalytic reforming of n-heptane

• Facile method for loading of WO3 inside SBA-15 as precursor for the preparation of suitableHDS catalyst

• Study of the properties WC-Co nanostructured coatings sprayed by plasma spray

• Amino Coupling Agent in Hydrophilic Nanocomposite hybrid Coatings

• Corrosion Resistance of Ceramic Articles Fabricated From -SiAlON Nanopowder

• Synthesis of silver tin oxide nano composite powders by coprecipitation method

• Effect of Organoclay and SEBS-g-MA Contents on Constituting Balance between Stiffness vs. Toughness in PP/SEBS-g-MA/Organoclay Nanocomposites

• Mechanical properties of nano-alumina reinforced Al 6063 nanocomposites produced by reactive mechanical milling and hot extrusion

• Role of Elastic Modulus on the Acoustic Transmission Loss of Polypropylene/Barium Sulfate/Calcium Carbonate Nanocomposites with Microfiller/Nanofiller Bimodal Size Distribution

• Fabrication of nanostructured magnesium composite reinforced with MgO & Mg2Cu by in situ displacement reaction using high-energy ball-milled powders

• Heat Treatment Conditions for Growth of One-Dimensional Tin Oxide Nanostructures

• Design a Novel Nanoreactor Composed of Tungstate Ion Immobilized in the Hydrophobic Channels of SBA-15 as a Recyclable Catalyst for Oxidation of Organic Sulfides

• Preparation of a New Macrocycle as Nano machine

• Encapsulation of Nano Hematite into System of Alumina-Silica Composite as a Non Toxic Red Pigment

• Superabsorbent polymer as nanoreactors for preparation of hematite nanoparticles and application of the prepared nanocatalyst for the Friedel-Crafts acylation

• ZnO nanoparticles: An efficient nanocatalyst for the synthesis of -acetamido ketones/esters via a multi-component reaction

• Bleaching, demethylation and degradation of methylene blue by CoS/nanoAlMCM41 under ambient condition and visible light

• Highly Efficient Solvent Free Oxidation of Ethyl benzene Using Reusable Heterogeneous Nano-catalysts: The Role of SiO2-Al2O3 mixed-oxide and linker in Competency of Mn(III)-Schiff base complexes

• Palladium Nanoparticles Immobilized on Newly Modified Sol-Gels: Excellent Catalysts for Cross-Coupling Reactions

• On the factors influencing the properties of Titania nanopowder with high photocatalytic activity

• Photocatalytic Degradation of Acid Carmosine Red 14 using Cotton Fabric Coated by Nano TiO2

• Electrophoretic deposition of titania nano-powders in butanol as a solvent: studying suspension stability, kineticks of deposition, microstructure and packing density of coatings

• Immobilization of ZnS and CdS nanoparticles on the surface of modified Bentonite

• Application of industrial immobilized TiO2 nanoparticles for photocatalytic treatment of dye solution in rectangular photoreactor

• Immobilization of Copper Nanoparticles onto Activated Multi-Walled Carbon Nanotubes and a Study of its Catalytic Activity as an Efficient Heterogeneous Catalyst for a Three Component Synthesis of Triazoles from In Situ Generated Azides

• Photocatalytic degradation of nonionic surfactant using Zinc oxide nanoparticles

• Fabrication and catalytic properties of α-Fe2O3 nanoparticles

• ENZYME MIMICS BY HETEROGENEOUS NANOBIOCATALYSTS OF PEROXIDASE/MESOPOROUS MATERIALS

• Immobilized mixed metal oxo-centre complex in nano-pore of mesoporous silica, a selective catalyst for oxidation of cyclohexene

• Preparation of Pd (0) and Pd (II) Nanotubes and Nanoparticles on Modified Bentonite and their Catalytic Activity in Oxidation of Ethyl benzene

• Efficient allylic oxidation of cyclohexene over tricomponents nanocatalyst Ru/Co/Ce Using different peroxides as oxidant

• Lanthanide Modified SAPO-34 Nanocatalysts for Methanol to Propylene Conversion

• Nanocatalyst Based on Zirconocene Grafted with SBA-15 and MCM-41 for Olefin Polymerization

• Dependency of Anatase/Rutile Transformation to Thermal Spray Processes in TiO2 Nanostructure Coatings

• Chemical vapour synthesis of V-doped TiO2 nanoparticles and characterization of their photocatalytic activity

• ZnO nanoparticles: An Efficient Nanocatalyst for the synthesis of quinoxaline in solvent Free Condition

• Study of Catalytic Activity of Nano-structure Co, Cu/ZSM-5 Catalysts for Conversion of Methanol to Gasoline Range Hydrocarbons

• Piperidine grafted on nanopore of MCM-41: An efficient reusable heterogeneous catalyst for the one-pot synthesis of spiro[indoline-3,5'-pyrimido[4,5-b]quinoline]-triones in water

• Pt nanowires: Electrodeposition and Properties

• The Effect of Pentaerythritol in Synthesis of the Nanoporous Silica

• Synthesis, characterization and catalytic oxyfunctionalization of cyclohexene with tert-butylhydroperoxide over a manganese(II) complex covalently anchored to multi-wall carbon nanotubes (MWNTs)

• One-pot Three Component Synthesis of Quinazolinone Derivatives Using Nano ZnO Catalyst under Solvent-free Conditions

• Keggin and Aluminum oxide Grafted on TiO2 and MCM-41 Nanostructure Materials as Efficient and Reusable Catalysts for the Synthesis of Oxindole Derivatives

• brief study on the tubular structure of anodic TiO2 prepared in phosphate-base and sulphate-base electrolytes

• Synthesis and Catalytic Applications of Sulfuric Acid Functionalized Nano and Micro Silica structures

• Preparation, characterization, and catalytic application of Pd nanoparticles immobilized on silica

• Nano Crystalline Mn- ZSM-5 Catalysts for Oxidation of O-VOCs-Deactivation study

• HClO4- Functionalized Silica Coated Magnetic Nanoparticle as Green-Recyclable Catalyst for Ritter Reaction under Mild and Solvent-Free Condition

• Catalyzed Nitration Of Aromatic Compounds with Nano Clay/IL

• Electrocatalytic Oxidation of Tryptophan at Gold Nanoparticle-Modified Carbon Ionic Liquid Electrode

• Biocatalytic Oxidative Coupling of Alkylphenols in Self-Assembled Micellar Nanoreactors:Effect of Surfactant Hydrophobic Chain Length

• Photocatalytic degradation of Triton X-100using silica gel modified by nano scale TiO2 under UV and solar irradiation

• Thermally stable mesoporous anatase TiO2 with high photocatalytic performance

• Hydroxyapatite Coated Magnetic Nanoparticle as a Recyclable Catalytic system for Synthesis of -Aminophosphonates

• An Investigation on the effect of Sonication and Ethanol Concentration on SBET Value of TiO2 Nano particles Synthesized in Neutral Condition

• Preparation of Supported Nano iron oxides on the them by K2O for catalytic recycling of the styrene from polystyrene

• Nano-TiO2 and Preyssler Dopped Nano-TiO2: A Facile and Efficient Catalyst for the Selective Oxidation of Sulfides to Sulfones and Sulfoxides

• Nitrogen doped nanostructure titanium dioxide thin film: photocatalytic property and structure

• Hydrothermal and Sonochemical Synthesis of Nano-sized Copper(II) and nickel(II) Schiff base complexes: A Precursor For Nano-structured Copper(II) Oxide and Nickel(II) Oxide and Study of their Spectroscopic,Catalytic,Thermal and Antibacterial Properties

• Comparison of two different WO3 nanostructures photo catalytic property

• Efficient Catalysts and their Supports from Carbon Nanotubes

• Synthesis and characterization of nano structured lead containig materials from a polymeric minoxidil bromide lead(II) complex as precursor

• Titania nanotube arrays prepared in DMF/HF electrolytes

• Effects of primary sol aging on structural revolutions of mesoporous titanium dioxide:from the primary sol to the final powder

• Synthesis of TiO2 nanofibers using electrospinning for photocatalytic application

• Fabrication of Highly Stable Silver Nanoparticle via Microemulsions:Influence of Operational Parameters

• Shape-controlled synthesis of TiO2 nanostructures

• Investigation on Type and Morphology of Ultrasonic-Assisted Synthesized Alkaline-Earth Metal Compounds nanostructures under same condition

• Absorption of new methylene blue in mordenite and mordenite nanocrystal zeolites

• Determination of very low levels of precious metals in real samples by atomic absorption by preconcentration on modified MCM-48 and MCM-41

• Synthesis and Characterization of boron carbide nanoparticles via PVA and boric acid as precursors

• Synthesis and electrochemical evaluation of Pt-carbon mesoporous functionalized by nickel oxide

• Synthesis of La3+ and Zr4+ co-doped Anatase Nano TiO2 by Sol-Microwave Method

• Preparation of a nano composite of clinoptilolite and investigation of its activity for VOC catalytic oxidation

• Experimental Design in Producing Self-Clean Surfaces

• Extraction and determination of Cu (II) in wastewaters by new combinational solid/Liquid microextraction technique; Functionalized MWCNTs in hollow fiber and flame atomic absorption spectroscopy

• The effect of carbon nanotubes in increasing the hydrogen storage capacity

• Effect of different liquid media on pulsed laser ablation synthesis of Al nanoparticles

• Solid phase extraction and determination of trace amounts of lead(II) using modified iron oxide magnetic nanoparticles by flame atomic absorption spectroscopy

• Application of modified multiwalled carbon nanotubes as a sorbent for separation and preconcentration trace amounts of Pd(II)

• Evaluation of a High Conductivity TiO2/Ag Fibrous Electrode with EIS measurements

• Synthesis of polymer nanocomposites and organic - inorganic hybrids with using of sol -gel technology for determination of volatile water pollutants

• Synthesis of fine Attapulgite Particles in supercritical carbon dioxide via RESS process

• Photocatalytic degradation of Direct Sky Blue 5B over ZnO/ITO interface nanostructure composite films

• Formation of Submicron Carboxymethylcellulose Particles in supercritical carbon dioxide via RESS process

• The Effect of Annealing Temperature on Photoelectrochemical Performance of TiO2-ZnO Nanocomposite Thin Films

• Layer-by-layer self assembly fabrication of nanoparticulated TiO2 hollow fibers as light catteres in dye-sensitized solar cells

• Nitrate elimination from water by Fe nanoparticles fabricated by two methods: Reduction vs.arc fabrication

• Tio2 nanotubular fibers for dye sensitized solar cells

• Effect of mechanical milling parameters on synthesis and properties of iron aluminide alloy nanostructures

• Charactrization and Electrochemical Investigation of a Novel High performance Nanocomposite Proton Exchange Membrane

• The Mechanical Properties of Concrete Containing Nanoparticles of Phoenix dactilifera Leaf

• Investigation the Effect of Nanoclay on Direct Methanol Fuel Cell Performance of Polyelecterolyte Membranes Based on Sulfonated Aromatic Polymers

• On the Effects of Electrolyte on the Capacitive Bbehavior of Nanostructured Molybdenum Oxides

• Comparison of Trap-State Distribution and Carrier Transport in TiO2 Nanotubular and Nanoparticular Electrodes of Dye Sensitized Solar Cells

• Sonochemical Synthesis of Nickel Oxide Nano-particle

• Synthesis and Application of Silica Aerogel-MWCNT Nanocomposites for Adsorption of Organic Pollutants

• Surfactant-Free Nonaqueous Route for Preparation of Metallic Nickel Nanoparticles

• Nanostructured YSZ thermal barrier coating, and its Oxidation & hot corrosion behavior

• Size Control of biosynthesized silver nanoparticles by solution concentration

• Binding Studies of Ionic Liquid-Capped Gold Nanoparticles with Plasmid DNA

• Synthesis and Optical Properties of Nano Flower Y2O3 by an Ionic Liquid-Assisted Method

• QM/Semiempirical Investigation of Interaction Between Nanotubes and Anticancer Drugs

• Synthesis of Functionalized-Gold Nanoparticles for Targeted Drug Delivery

• Nano-Mechanical Properties and Biomedical Application of Biodegradable Hybrid Organic-Inorganic Nanocomposites Based on Unsaturated Polyester Resins and Polyhedral Oligomeric Silsesquioxane

• Poly (lactide-co-glycolide)/ Bioactive Glass Nanoparticles/Hydroxyapatite Nanoparticles Composite Coating with Osteogenic and Antibacterial Effects on Titanium

• Detection of DNA Hybridization Based on Carbon-Nanotubes loadeh silver nanoparticles as a Electrochemical sensor

• Effect of Solvent and Concentration of Polymeric Solution on the Morphology of Electrospun Nanofiber

• Synthesis of Core/Shell Quantum Rods (QR) for Imaging of Cancer Cells

• Reverse micelle synthesis of functional superparamagnetic Fe/Au nanoparticles for MRI imagining and assessment of cytotoxicity

• Characteristics of Nano-Flower Sculptured Thin Films and Their Antibacterial Property

• Towards Targeted Imaging of Cancer Cells: Synthesis of Polymer Coated CdSe/ZnS Quantum Dot (QD)

• AAT Nanoencapsulaton

• Biopolymer Mediated Simple Synthesis of Silver Nanoparticles

• Priparation of nano hydroxyapetite /poly (3-hydroxy butryrate) nanocomposite scaffold used in bone tissue engineering

• Synthesis of Nano Fluoroapatite Powder Through a Continuous Precipitation Method

• Evaluation of parameters influencing the stability of nanoemulsions using artificial neural networks

• Fabrication and Characterization of Nanostructured Mg-Doped Fluorapatite by Mechanical Aloying

• Synthesis of a Novel Star-Shaped Polymer Based on Glutamic Aacid as a Gene Carrier

• Electrospun Poly ( -caprolactone) / poly (glycolic acid) blended nanofibers for Tissue Engineering Applications

• Evaluation of lesion Development and Type of Immune Response Generated in Mice Inoculated with L. major mixed with LPD Nanoparticles Containing CpG ODN

• Solid Lipid Nanoparticles for Enhancing Oral Bioavailability of Pentoxifylline

• In vitro biocompatibility assessment of POSS/PCU membranes using L929 mouse fibroblasts

• In situ biomimetic synthesis and characterization of bone like nano hydroxyapatite in starch matrix

• The Study of the Interaction Between Silver Nanoparticles, DNA and Doxorubicin

• Synthesis of -cyclodextrin terminated, citric acid based dendrimers and their applications as the biodegradable nanocarrier systems

• Silver Zig-Zag and Pentagon Sculptured Nano-rods: Fabrication, Characteristics and Antibacterial Property

• Hydroxyapatite/Titania Nanostructure Biocoating on Ti6Al4V Alloy by Sol-Gel Dip-Coating

• Study of Trypsin Behavior into Functionalized Nano-Engineered SBA-15: Loading and Stability of Enzyme

• Constructive Component of Nano Machines

• Spherical Bioactive Glass Nanoparticles for Bone Regeneration

• Efficient and Convenient Solubilization of Multiwalled Carbon Nanotubes

• The Wiener, Szeged and Cluj-Ilmenau Indices of C4[n] Nanocones

• Dispersion of Multiwall Carbon Nanotube in Aqueous Solutions,Using NADDBS Surfactant

• Evaluation of Carbon Nanotubes as Solid-Phase Extraction Sorbent for the Removal of Cephalosporins from Aqueous Solution

• Quantum Ion-Acoustic Wave Oscillations in Two-Walled Carbon Nanotubes

• Comparison Between Effect of Nitric and Sulfuric Acids on Purification of Multi-walled Carbon Nanotubes

• Electrochemical Destruction of C.I. Basic Yellow 2 for Wastewater Treatment Using aCarbon nanotube – PTFE O2-Fed Cathode

• Effect of Temperature and Twist Speed on Torsion of Single-Walled Carbon Nanotubes

• Dispersion study of multiwalled carbon nanotubes(MWNTs) in organic media and preparation of uniform film of MWNTs on Alumina substrate by using spin coating technique

• Preparation of Novel Functionalized Single-Walled Carbon Nanotubes as Potential Building Block for Biological and Pharmaceutical Applications

• Preparation and Characterization of Carbon Nanofibers via Electrospun PAN Nanofibers

• Functionalized Carbon Nanotubes as New Catalyst in Ring Opening of Epoxides by Using Elemental Halogen

• Catalyst Rippling and Interface Growth of CNTs Over the Hot Filmanet Grown Fe-Cr Thin Films

• Theoretical modeling for Gigahertz Absorption in Metallic Carbon Nanotubes by Considering Spin-Orbit Interaction and Magnetic Field

• Thermodynamic Studying of MTBE on Wall of Carbon Nanotube (CNT) to Other Products from Air- Groundwater (in Environment): DFT Studies

• Mild and Efficient Oxidation of Multi-walled Carbon Nanotubes with Ozone in DMF

• The effect of nanotubes’ content and their hydroxy- and carboxy-functionalization in (hydrogenated) nitrile rubber/(un)functionalized multi-walled carbon nanotubes composites prepared by melt compounding and their morphology, mechanical, structural,thermodynamic, and functional properties

• Fabrication and morphological investigation of branched carbon nanostructures prepared by a plasma enhanced CVD method

• Sonication Effect on Physical Properties of Functionalized Multi-Walled Carbon Nanotubes

• New Feasible and Realizable 2 and 4 Transistors CNT Full Adder Cells

• Raman spectroscopy study of multi-walled carbon nanotubes synthesized via arc discharge in aqueous solutions

• Proximity Effect in Graphene Superconductor- Normal Junctions

• Study on Hydrogen Adsorption on Multi-Walled Carbon Nanotubes by Electrochemical Method

• Carbon Nanotube-Roxithromycin Conjugates: an Attempt to Design a New Drug Delivery System

• A New Way to Introduce the Thioamide Groups to Single-Walled Carbon Nanotubes

• Preparation and dielectric properties of nanostructured Ba(Ti1-xZrx)O3

• Electrospinning of Polyethylene Oxide from Acetic Acid Solution

• Synthesis of Highly Crystalline Polyaniline Nanotube by Dicationic Lionic Liquid

• Facile Synthesis of Polyaniline Nanoparticle Doped with Hematoporphyrin in Ionic Liquid

• Plasmon Excitations in Nanostructures: Wires, Capillaries and Tubes

• New Approach to Find the Intensity Profile of the Light Emerged from a Tapered Fiber Probe (TFP) Using Hertz Vector Diffraction Theory (HVDT)

• Evaluation of the Alloy Scattering in Limiting the Hole Mobility of Si/SiGe/Si Based Fileld Effect Nanotransistors

• Dye-Sensitized Nanocrystalline ZnO Solar Cells Based on Ruthenium(II) Phendione Complex Photosensitizers: New DSSCs

• Study of Linear and Nonlinear Optical Properties in a V-Groove Quantum Wire

• Triangular Network of Quantum Nanorings as a Spintronic Device

• Investigation of the 0- π Phase Transition in Ferromagnetic Josephson Nanostructures

• Polymeric Nanowire Biosynthesis by Micellar Templates of Ionic Surfactants

• Field Emission Study of Au Catalytic Grown ZnO Nanowires

• The Arrangement of Alumina Nanopores Formed in Various Stripping Durations

• Electro Absorption Process and Quadratic Electro-Optic Effect of a Two Dimensional Flat Elliptic Quantum Dot

• Sonochemical synthesis of V2O5 nanorods: The effect of time and ultrasound power

• The Effects of Grain Size on Dielectric and Piezoelectric Properties of Lead Free (K0.5, Na0.5)(Nb1-x-y, Mox, Tiy)O3 Piezoceramics with Nano ZnO Additive

• Electronic Transport Engineering in GaAs/GaAlAs Aperiodic Semiconductor Superlattices

• Different morphology of AgI nano-structures by different reaction condition under ultrasound irradiation

• Modeling Linear Ooptical Properties of Hydrothermally Synthesized ZnO Nanoparticles with Artificial Neural Network (ANN)

• Compositional, Structural, and Optical Properties of Nanocrystalline Mn Doped ZnS Thin Films Prepared by Chemical Deposition Method

• Efficient Carbon Nanotube LukaSiewicz Circuit Design

• A Proposed Structure for Reducing Bias Voltages in Nanoscale Impact Ionization MOS Devices

• Synthesis, Characterization, and Nonlinear Optical Properties of Silver Nanoparticles

• Modeling the Effects of Homogeneous Broadening on the Modulation Response and Lasing Spectra of Self-Assembled InAs-GaAs Quantum-Dot Laser

• Silicon nano-grass and nanowires on silicon substrates using high precision reactive ion etching

• The Visible Wavelength Diffraction from Two Dimensional Grating Fabricated by Mild Anodization Technique

• Highly Controlled Electrolysis Using Carbon NanoTubes in MOSFET Transistor

• Ultra-High Sensitive ISFET pH-Meters by Nano-Porous Silicon Structures as Sensitive Membrane

• Conductance in Two Dimensional Electron Gas with Rashba Spin- Orbit Interaction

• Numerical Two Dimensional Temporal-Spectral Analysis of Random Lasers Based on ZnO Nanoparticles

• A New Compact Model for Ambipolar CNFETs

• Nanostructure Effects in Microring-Based Uni-Travelling-Carrier Photodiode

• Effects of Homogeneous Broadening on the Modulation Response and Lasing Spectra of Self-Assembled InAs-GaAs Quantum-Dot Laser

• Hydrothermal synthesis of barium titanate nanoparticles and study of the densification behaviour during sintering

• Impact of Length and Diameter of Channel on Carbon Nanotube Field Effect Transistors

• Enhancement of Fluorescent Microscopy for Single Molecule Detection (SMD)Based on Third Order Nonlinear Susceptibility; a Computational Study

• Properties of the Interface of a Carbon Nano-Composite in Hyperelastic Matrix

• Model for Heat Conduction of CNT-Nanofluids

• Ab initio Study of Borazine Cyclacenes; a Proper Candidate to Construct Nanostructures

• Molecular Dynamics Simulation of Wetability of Sn-Ag Nanodrop

• Computer Simulation for the Formation and Stability of Methane Hydrate Nanostructure

• Study of the Role of the Interphase Layer in the Mechanical Behavior of SWCNT/Polymer Composites Using Three-Phase Multiscale Modeling

• Molecular Dynamics Simulation of Adsorption of Heavy Metal Ions with Iron Nano Particle

• Size-Effect on the Mechanical Properties of Nanowires via Boundary Cauchy-Born Method

• DPD Simulation of Electroosmotic Flow in Nanochannels for Newtonian and Non-Newtonian Fluids

• Hybrid Finite Element-Neural Network Method for Prediction of Bucky Paper Nanocomposite Elastic Properties

• First Principles Study of Half Metallic Properties of VSb/GaSb(001) Interface

• Deposition of ceramic Nanoparticles in Low Frequency AC Electric Field: Modeling and Experiment

• Tip Shape Effects on Surface Trench Characterization with Amplitude Modulation AFM

• Simulation and Prediction of Nano-Particles Diameters of Spray Reaction Synthesis Process of c-ZrO2 by Radial Basis Functions

• Investigated the Optical Properties of CdTe and CdSe Nanolayers

• Simulation of Nano-scale Heat Conduction Using Dual-Phase-Lag Model and Introducing aGeneral Time Dependent 1-D Model

• Molecular Dynamics Simulation of Manipulation of Metallic Nanoclusters on Double-Layer Substrates

• Structures and Aromaticity as Functions of Length and Width for Silicon-Carbon vs. Carbon Nanotubes at DFT

• Application of discrete element method for predicting particle arrangement and designing nano-patterned materials

• Extraction of Solitonic States from Spin Density Wave in Nanoconductors

• An Investigation of Surface Energy of Gold Nanoparticles; Molecular Dynamic Study

• Mechanical Properties Evaluation of Carbon Nanotube Sheets

• Dynamic Behavior of Nanoparticles in Pushing Based on V-Shape Cantilevered AFM

• The Effect of Base Fluid on Ferrofluid Heat Transfer

• Adsorption of Poly-Functional 5-Flourouracile and 2,4-Dithio-5-Fluorouracil on Au(111)Surface: Structure, Energy and Electronic Property

• Discrete Fe2O3 Nanoparticles on the Surface by Boil Deposition: A Stochastic Simulation

• Application of Mottle and Graininess Algorithms for Nano-web Uniformity Measurement

• The Structural and Electronic Properties of MnCo2Si and MnFeCoSi Nanolayers

• Performance Analysis of AFSMC Control of AFM Microcantilever with Chaotic Motions

• Dynamic Modelling of 2D Nano-manipulation Based on AFM in Liquid Environment

• Modelling and Analysis of the Hybrid-Nonlinear Dynamics of Tapping Mode Atomic Force Microscopy with Van der Waals, Capillary and Repulsive force Interactions

• Reorganization of Charge Density in Se@C60 Complex after Intercalation

• Heat Transfer in Nanochannel Devices Using DSMC

• Application of Artificial Neural Network for Modeling of Acetylene Hydrogenation overPd-Ag/ -Al2O3 Nano Bimetallic Catalyst

• Stability and Size-Dependency of Temperature-Related Cauchy-Born Hypothesis In Three-Dimensional Applications

• Analysis of Intersubband Absorption and Quantum Efficiency for Different Shapes of Self-Assembled Quantum Dots

• A Numerical Model for Determination of Electrostatic Charge Distribution on Conducting Nanowires

• Stability Analysis of a Novel MEMS Gyroscope Actuated by Parametric Resonance Using Floquet Theory

• Characterization of Operating Regimes in Tapping Mode Atomic Force Microscopy

• Molecular Dynamic Simulation of Surface Growth of Metal Clusters in Gas Phase Condensation Processes

• Evidences of Allosteric Interactions in the DNA Molecule at Nano-scale

• Mechanical Modeling of Carbon Nanotubes

• The Size Effect on Creep Behavior of Nanostructured Metals

• Preparation of highly stable and well separated of carbon nanotubes in an aqueous modified polyacrylonitrile solution

• Molecular Dynamics Simulation of Mechanical Properties of Ni-Al Nanowire

• Torsional and bending buckling behavior of perfect and defective single-walled carbon nanotubes

• Depth profile analysis nanometric layers by Laser Induced Breakdown Spectroscopy

• Prediction the compressive strength of CNTs/cement composite by analytical method

• Size-dependent Yield Strength of Nanoporous Materials under In-plane Loadings

• The MoS2 nanohybrids grown in a confined geometry of nanotube reactors

• Synthesis and structure of spinel-type oxides in Mn !Co and Ni ternary system nanopowders at low temperature

• Magnetoelectric thin film composite of PZT/Co-Fe magnetic alloy bilayer

• Comparative thermal study of nanocrystallization in Finemet alloy

• Investigation of artificially structured magnetic multilayer thin films by using Polarized Neutron Reflectometry

• Synthesis of barium hexaferrite nanoparticles by sol-gel method

• Influence of interface roughness on spin-polarized transmission in PbS/EuS double barrier structures

• Tunneling Magnetoresistance in Double –Barrier Magnetic Tunnel Junction

• The effect of magnetic behavior of vacancy defect on the conductance of carbon nanotubes

• Spin-waves in magnetic nanostructures: Epitaxial Fe monolayer, double layer and nanoislands on W(110)

• The effects of electrodeposition voltage and electrodeposition waveform on magnetic properties of cobalt nanowire arrays deposited in anodized aluminum oxide (AAO) template

• Effect of pretreatment of AAO template on NiCoFe Nanowires Synthesized by Electroless Deposition

• Influence of Cobalt and magnetic field on the real part of complex permeability–frequency spectra of Finemet nanocrystalline alloys

• Morphological Study of CoNiFe-B Thin Film Fabricated on Si Substrate by Electroless Method

• Inclusion of Airy's asymptotic functions for TMR voltage dependence phenomena in comparison with Kubo's formalism in nanostructures

• Preparation of pure and Mn-substituted magnetite nanoparticles and investigation of their magnetic properties

• Effects of external magnetic field and electronic states on spin-subbands entanglement in a 1D Rashba quantum wire

• Synthesis of iron oxide nanoparticles and enhancement of their saturation magnetization

• The Influence of Edge and Corner of Nanoparticles on Curie Temperature

• Glassy carbon electrode modified with a film of Nanodiamond-graphite/chitosan:Application to highly sensitive electrochemical determination of Azathioprine

• Electrooxidation of dextromethorphan on a carbon nanotubes-carbon microparticles-ionic liquid nanocomposite

• Humidity sensors based on high-field anodized porous alumina films

• Determination of Acetaminophen in the Presence of Codeine and Ascorbic Acid at Layer by Layer MWCNT/Doped-Polypyrrole Modified Glassy Carbon Electrode

• Colorimetric Detection of D-Penicillamine Based on the Aggregation of Gold Nanoparticles

• Gold electrode modified with functionalized MWNT self-assembled monolayer and it’s application in determination of dopamine (DA) in thr presence of uric acid (UA)

• Thionine supported on multi-walled carbon nanotubes for modification of carbon paste electrode; application to simultaneous voltammetric determination of ascorbic acid and acetaminophen in the presence of isoniazid

• Electrochemical Characterization of Platinum Nanowires

• Effect of Surface Modification of CNTs on Response Behavior of Conductive Polymer Composite Vapor Sensors

• Electrical properties comparison of NTC thermistors prepared from nanopowders and mixed-oxide process

• Structure and properties of nanostructured Cu-Al-Ni shape memory alloy produced by melt spinning compared with ingot microstructure

• Hydrogen Sensitivity of Pure and MWNTs/WO3 hybrid films

• Cholesterol Biosensor Based on Immobilization of Cholesterol Oxidase on a Gold–Platinum Bimetallic Nanoparticles Modified Glassy Carbon Electrode

• A Selective Mercury Sensor Based on the Adsorption of Cold Vapour of Mercury on Single- Walled Carbon Nanotubes

• ZnO 1-Dimensional Nanostructures as New Stationary Phase for Solid Phase Micro Extraction (SPME)

• Preparation of TiO2 nanorods by sol-electrophoretic deposition method

• Gas sensing properties of various morphologies of SnO2 prepared by using single and mixed ionic surfactant templates

• Investigation of carbon dimer transfer from molecular tool (DC10c) to different structures in mechanosynthesis using DFT method