The 6th International Conference on Composites: Characterization, Fabrication and Application, آذر ماه ۱۳۹۷

Accepted papers in The 6th International Conference on Composites: Characterization, Fabrication and Application

• The use of electrophoretic deposition (EPD) method to prepare graphene-based nanocomposites

• The size effect of nanoparticles on the mechanical and electrical properties of cement–Fe3O4 nanocomposite

• Effect of chemical composition on the intermetallic compound formations of cold-sprayed Ni-Ti composite coatings

• Comparison investigation on photocatalytic efficiency of TiO2 nanosheets doped by cobalt and silver for tetracycline degradation under visible light

• Numerical Modeling of Crack Propagation in Functionally Graded Materials (FGMs) using XFEM

• Investigation of the Influence of Viscoelastic Material Injection in Faulted Zones on Segment Constructed Tunnels Behavior

• The Simulation and optimization of carbon black/ PTFE composite as the gas diffusion layer of an electrolysis cell

• Fracture behavior of Magnesium/Hydroxyapatite bio-composites

• The study of interlaminar fracture resistance of NH2-CNT reinforced fiber metal laminates using modified asymmetric DCB geometry

• Fabrication of NCM–graphene nanocomposite as the cathode material for use in Li-ion batteries

• Axial crushing behavior of two-dimensional braided composite tubes-An experimental study

• Effect of 3D printing process parameters on mechanical properties of PLA specimens

• Analytical progressive damage analysis of laminated composites based on various material degradation models

• Prediction of mechanical properties of CNT/epoxy nanocomposite-3D RVE-based approach

• Electromagnetic properties of 70 wt. % Carbonyl iron/woven glass fiber/epoxy composite in X-band frequency

• New synthesis of Zeolite Y/Palladium/Nickel ferrite nano composite by ultrasonic irradiation

• Effect of Halloysite Nanotube Addition on Properties of Poly (lactic acid)-based Nanocomposites

• Investigation of Mechanical and Morphological Properties of Silica Nanofiber Reinforced Epoxy Nanocomposites Prepared by a New Dispersion Method

• Effect of Accelerator on Curing Behavior of Dicyandiamide-Cured Epoxy Resin

• Numerical Analysis on Flexural Properties of Sandwich Panels with FML Face Sheets Reinforced by SMA Wires

• A Finite Element Model for Controlling Static and Dynamic Response of Composite Laminates through Piezoelectric Layers

• Increasing Osteoconduction and Osseointegration of Titanium surface by a Novel Surface Treatment Coated by Hydroxyapatite-Nanoclay Composite

• Prediction of Temperature-Dependent Mechanical Properties of Epoxy

• Micromechanical Modeling of Self-Healing Polymer Composites

• Modeling the propagation of Torsional Ultrasonic Guided Wave in Composite Pipes

• Strength Improvement of Composite-Steel Lap Joint by Reverse Step and Grading the Overlap with Fiber

• Micromechanical finite element modeling of moisture diffusion in unidirectional composite materials

• A numerical analysis of torsion load capacity in hybrid tubular joints between composite to metal under pure torsion

• Preparation of Mesoporous Silica-Polymer Composites to Introduce Dual Porosity in Monolithic Silica

• Study on Quantitative Predictors for Dispersion and Interfacial Interaction in Composites

• The effect of foam morphology of carbon black reinforced poly (methyl methacrylate) nanocomposites on electrical conductivity

• Effect of nanoclay on the extent of transesterification in PET/PEN nanocomposite

• Influence of different number of aluminum sheets on energy absorption and damage modes of FMLs

• Investigation of high velocity impact on hybrid structure consist of E-glass woven fabrics and Aluminum sheets with different thickness

• Fe3O4 Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform

• Thermal buckling analysis of FG-CNT reinforced composite cylindrical panels

• Mechanical buckling analysis of FG-CNT reinforced composite cylindrical panels

• Effect of YSZ and SiC Reinforcements on the Mechanical Properties of Cr2O3 Plasma-sprayed Nanocoatings

• Numerical analysis of static axial load bearing capacity enhancement in FRP strengthened tubular T-joints

• Buckling of Composite Submarine Body Structures under External Pressure

• The Strength of Flax/Epoxy and Glass/Epoxy Composites: Fiber s Orientations

• Axial impact of E-glass fiber/epoxy and carbon fiber/epoxy composite frusta with square and circular cross-sections

• Evaluation of delamination and hole edge quality in drilling hemp fiber reinforced composites

• Micro-scratch Behavior of Friction Stir Processed Al-SiC Nanostructured Composites

• Prediction of matrix cracking density in laminated composites using micromechanics

• Effects of layup on energy absorption in laminated composites under Charpy impact test

• Stress Distribution in Horizontal Composite Cylindrical Vessels on the Saddle Supports

• Numerical and Experimental Buckling of Composite Grid-Stiffened Conical Shells Before and After Transverse Low-Velocity Impact

• Finite element simulation of 3D integrated weft-knitted sandwich composites with different cross sectional shape

• The residual bending strength after impact of the 3D integrated weft-knitted sandwich composites in tensile and compression modes:The effect of geometrical cross sectional shape

• Fracture in bimaterial systems containing interface crack

• On the mixed mode fracture toughness of epoxy-based composites reinforced by cotton fibers

• UV Treatment as a method for adhesion enhancement of polyethylene to E-glass/Epoxy composites

• Effect of the conversion degree on the healing efficiency of a novel thermally remendable polymer

• Efficiency determination in self-healing polymer matrix composites reinforced with shape memory wires

• Effect of acid-thermal aging on flexural strength and modulus of unidirectional E-Glass/Vinyl ester composites

• Investigation of harness effects on mechanical properties of woven composite materials

• The experimental analysis on the effect of embedded pre-strained SMA short and long wires on the behavior of carbon/epoxy laminates subjected to low-velocity impact

• Repeatability of the slitting method in measurement of residual stresses in laminated composites

• Non-destructive evaluation of matrix cracking in composites using Lamb wave propagation

• Residual stress measurement in composites using slitting method and digital image correlation technique

• Effect of Pre-strain on Debond Initiation in Shape Memory Alloy Wire Reinforced Polymers

• An investigation on impact strength of a thermoplastic composite made by hybrid fiber knitted preform

• Frequency-dependent viscoelastic behavior of randomly-distributed-CNT/epoxy nanocomposites using a combined finite element-micromechanics method

• Fatigue Life of Single-lap Composite Samples over Tightening Torque of Bolted Joints

• Characterization of a fiber reinforced composite through use of ultrasonic scattering techniques

• Buckling Optimization of Variable Stiffness Composite Cylindrical Shell with Cut-out under External Hydrostatic Pressure

• Progressive damage analysis of open holed cross-ply laminate under static loading

• Progressive damage analysis of unidirectional pseudo-ductile hybrid composite laminates under tension loading

• NiB–Graphite and NiB–PTFE Composite Coatings Prepared by Dynamic Chemical Plating Method: Morphological studies

• NiBP-graphite Composite Coatings: Corrosion Characterization

• Prediction of the Young s modulus of SWCNTs/epoxy nanocomposites by considering SWCNTs curvature and local agglomeration

• Pull-through Damage Simulation in Composite Bolted Joints Using Numerical and Experimental Methods

• Electrical Conductivity Improvement of Epoxy Resin Using Expanded Graphite

• Aeroelastic Energy Harvesting Analysis Using Unsteady Aerodynamics

• Biomimetic synthesis of gelatin-hydroxyapatite composite scaffold for bone tissue engineering application

• Novel synthesis of mesoporous silica/Fe3O4 nanocomposite with core-shell structure

• Uniaxial tensile and compressive behavior of Mg/Al2O3 nanocomposite at ambient and elevated temperatures

• Effect of Particle Distribution on Nano-indentation of Particle Reinforced Nano-composites

• Free vibration analysis of piezoelectric laminated composite plate with improved zigzag theory

• Energy Absorption Analysis of Empty and Foam-Filled Bi-tubular Composite Tube under Axial and Oblique Loading

• Investigation on the debonding between different layers in a hybrid aluminum/glass-epoxy/rubber laminate under high velocity impact

• Molecular dynamics investigation of interaction energy between polystyrene/polyethelen and SWCNT, functionalized SWCNT and DWCNT

• Fracture Energy of CFRP Composite Lamina in Fiber Breakage Mode using Digital Image Correlation and Finite Element Methods

• Experimental study on the plies adhesion of a novel hybrid laminate composed of aluminum, glass-epoxy composite and natural rubber layers under low velocity impact

• Numerical Investigation on Honeycomb Foam Filling and Honeycomb Density Increasing in Ballistic Impact Behavior

• Agar-zinc adsorbent synthesis with Nano cavities to absorb protein nanoparticles

• Effect of Titanium Peroxide on Hydrogen Generation from Magnesium Hydride

• Thermal Buckling Analysis of Open Circular Cylindrical Shells Reinforced with Single walled Carbon Nanotubes Best on Resting Elastic Foundation

• Dimension Optimization of a Carbon/Epoxy Lunch Vehicle Adaptor in Order to Maximize the First Resonance Frequency

• Shock Analysis of a Carbon/Epoxy Composite Satellite Adaptor

• FEM Buckling Analysis of a Lattice Composite Adaptor in Order to find the Optimum Dimensions

• Curvature changes and weight loss of GFRP composites under thermal fatigue

• The role of thermal fatigue and open hole on the tensile performance of polymeric composites

• Investigation of the effects of cooling temperature on the residual stresses of CFRP composite cylinders

• Characterization and in vitro studies on the effect of SrO on nano-hydroxyapatite layer in bio-composites

• Investigation the properties of synthesized copper based nano-composites with TiO_2 particles

• Free Vibration Analysis of Functionally Graded Thin Pipes Conveying Fluid Using GDQM

• The Effect of Fluid Flow on the Free Vibration of Functionally Graded tubes