6th International Color & Coating Congress, آبان ماه ۱۳۹۴

Accepted papers in 6th International Color & Coating Congress

• Characterization of inhibitor release from hydrotalcite pigment

• Application of trichromatic digital camera in combination with a filter to reconstruct the spectral data of colored solutions

• Synthesis of an organic dye based on thioindigo for dye-sensitized solar cells

• Effect of polyurethane-isocyanate microcapsules on self-healing properties of an acrylic-melamine coating

• Curing and mechanical properties of UV-curable nano-composites

• A novel hyperbranched polymer-modified clay/epoxy nanocomposite: physical-mechanical properties investigation

• Chemical reaction between Water based Acrylic resin and Portland Cement

• Degradation of polyurethane foam coatings

• Development of a color indicator for fish spoilage monitoring as an attempt to design a smart packaging

• Analysis of spectral components of fluorescent dyes on textiles

• Synthesis of Reversible Molecular Photoswitch Based on Diarylethene for Biological Applications

• Tuning molecular energy levels of dyes for bulk heterojunction solar cells

• Pore structure modification of ceramic membranes using magnetron sputtering system

• Colored nanoparticles as electronic ink in electrophoretic displays: a review

• Effects of Zr addition on corrosion resistance of CrN films prepared in a magnetron sputtering system

• A short review on the glancing angle deposition (GLAD) used for thin films as a new technique

• EIS study of the epoxy paint in two different corrosive environments with a new filler: rice husk ash

• Modified hydroxyl containing polyhedral oligomeric silsesquioxane with acrylic acid and investigation of its behavior in a UV curable coating

• The effect of life cycle on properties of thermochromic ink applied on cotton fabric

• Corrosion inhibition of AISI 316 stainless steel by Ni coating and subsequent annealing with flow of nitrogen at different temperatures

• Hydrothermal synthesis of NaYF4:YB3+,Tm3+ upconversion particles: role of ligand

• Synthesis of thermoplastic polyurethane coatings using POSS nanobuilding blocks: structural and mechanical studies and biocompatibility evaluation

• Evaluation of water vapor transmission rate (WVTR) and oxygen transmission rate (OTR) of biaxially oriented polypropylene coated by sol-gel based hybrid uv cured nanocoatings

• A histogram-based image processing method for visual and actual roughness prediction of sandpapers

• Analytical and electrochemical study of structure and properties of hybrid Na montmorillonite-silica coatings for corrosion protection

• A review on the color measurement and interpretation of special effect coatings

• Investigating the process of sessile water droplet freezing

• On the potential of CeO2 nanoparticles as corrosion inhibitor in waterborne acrylic coatings

• The effect of zirconium conversion layer on the corrosion performance of epoxy coated mild steel

• Kinetics of zirconium conversion coating film formation on mild steel surface

• Silane-treated nano silica as a new anticorrosion pigment in epoxy resin

• Synthesis of Novel Molecular Photoswitch Based on Azobenzene For Photo-Control of Biological Systems

• Synthesis and characterization of a suspension of CoAl2O4 as a blue pigment

• Effect of anodizing of recycled aluminum alloy in sulfuric acid electrolyte on wetting of Nano-silica top coat

• Characterization of plasma treatment on high density polyethylene surface wettability and adhesion

• Surface treatment of nanosilica using POSS: physicochemical and thermal characterization

• Chemical modification of cotton fabric by polyamidoamine (PAMAM) dendrimer

• Color extraction of textured images using discrete wavelet transform

• Effects of extractives on the physical and mechanical properties of clear coating varnishes on the wooden furniture surfaces

• Study the physical properties of two green pigments based on chromium oxide

• Advances in conversion coatings

• Removal of acid green 20 from wastewater of textile industries by photo-fenton process

• Dependence of adhesion strength of an acrylic clear coat on fractal dimension of abrasive blasted surfaces using image processing

• Methylene blue uptake by iranian Ca- activated bentonite: effect of acidification kinetics on adsorption

• UV curable epoxy acrylate–clay nanocomposites

• Evaluate the performance of advanced oxidation process method for removal of reactive red 198 in aquatic environments

• Photo-degradation of apollozol brilliant orange 3R by nano-photocatalysts–modified 3D fabrics

• Effect of shape and geometry on the most preferred color

• Removal of Acid Orange 7 from Aqueous Solutions by Modified Nanoporous MCM-41 Silica

• The effect of oxygen plasma on camouflage properties of printed fabric with MWCNTs

• Investigation of basecoat and clear coat thickness on orange peel in automotive recoating

• Morphological and electrical behavior of a sol-gel based Alq3 network to be used in OLED devices

• Investigating the amount of crispening effect on perceived color difference

• Corrosion resistance of epoxy coating filled with surface modified flaky aluminum pigment

• Comparative study on TRFs of white specimens recovered spectrally and colorimetrically

• Toughening of Epoxy Resin through Blending with Furan Resin

• Synthesis of some novel bioactive organic dyes and their antibacterial activity

• Colorimetric probes based on organic azo dyes for selective sensing of fluoride and cyanide ions

• Schiff base based colorimetric probes for the detection of cyanide and fluoride anions

• Synthesis and dyeing properties of some mono- and bis-azo dyes having naphthalene moiety

• Removal of rhodamin B in the semi batch photoreactor by a combined process (UV/H2O2/TiO2-Ag)

• Study on color characteristics of wool dyed with crude and extracted prangos ferulacea natural dye

• Removal of Methylene Blue from Aqueous solution by Electro-Fenton Processes

• Removal of reactive red 198 by calcium peroxide nanoparticles from textile wastewater

• Effects of cerium based conversion coatings on the corrosion resistance of AZ31 magnesium alloy

• Curing studies of a thermosetting clearcoat containing hyperbranched polymer and silsesquioxane nano-cages; Thermo-Chemo-rheological aspects

• Dyeing and fastness properties of wool dyed with thymus vulgaris L. natural dye

• Digital approach of the dyes compatibility evaluation using scanner

• Study of lead exported from yellow alkyd based paint, created by different grinding of lead chromate.

• Investigating the effect of black and silver basecoat pigmentation on the biological resistance of an automotive acrylic-melamine clearcoat

• Using derivative spectrophotometry to determine the relation between color intensity and dye concentration of madder

• The effect of oleic acid/silane treatments of Fe3O4 nanoparticles on the mechanical properties of an epoxy coating

• Decoloration of textile effluents containing different dyes by a combined coagulation/flocculation process

• Preparation and characterization of melamine-urea-formaldehyde microcapsules containing linseed oil using polyvinylpyrrolidone as emulsifier

• Relationship between surface pattern and adhesion on physical and mechanical properties of thin organic coating (Coil Coating) on hot dip coated steel sheet

• Specular Gloss: A study on instrumental and visual quantification at three illumination/observation geometries

• Application of scanning kelvin probe for studying the corrosion protection ability of nano polyaniline embedded epoxy coating

• Synthesis low cost graphene in large area using electrochemical method (a review)

• A review of synthesis of large area graphene by electrophoretic method

• Surface study of the blue colored 430 stainless steel by electrochemical method

• Fabrication and characterization of amorphous/nanocrystalline Fe-Ni-P electrodeposited coatings

• Investigation of perceived color difference for tritan pairs

• Epoxy-silicon nitride nanocomposite coating: Fabrication, corrosion protection performance and wear properties

• Colorimetric tests as a new method for analysis of the corrosion resistance of bare and phosphated steel in 3.5% NaCl solution

• Role of cerium nitrate on the corrosion resistance of alkyd coating

• Coral waste as a low cost sorbent for the removal of reactive red 198 from textile wastewater

• Investigation on the correlation between emitting particulate matters from laser printers and air humidity

• Synthesis and characterization of ionomer-based waterborne polyurethane- investigating mechanical and thermal parameters

• Fluorescent and thermal properties of self-colored waterborne polyurethane based on naphthalimide dye

• Investigating cathodic disbonding of external buried pipeline coatings in the presence of sulfate reducing bacteria

• Preparation and optical characterization of magnetic BiFeO3 film on colloidal photonic crystals

• The effects of different catalysis on surface modification of polyester substrate via glycolysis

• The effect of ultrasonic on dyeing of cotton fabric by madder

• Removal of organic pigment from environmental samples using magnetic nanoparticles functionalized with porphyrin

• Inkjet printing of gelatin as a biomaterial: a review

• Study the dispersability behavior of βCD in the dyeing of polyester

• Corrosion protection performance of nanoclay-polyester nanocomposite coatings

• Synthesis and characterization of CexZr1-xO2 nanopigments, using sol-gel method

• Fabrication of hollow and non-hollow SiO2 nanofibers: investigation of production conditions and the dye removal ability

• Investigation of effective factors on properties of mercaptosilane layer on mild steel substrate

• Advances in electrostatic coatings and paints

• The effect of hyperbranched polymer on the curing behavior of uv curable inkjet ink

• Molecular imprinting polymer capped quantum dots applicable as an optical sensor: synthesis to application

• Synthesis and surface modification of the zinc sulfide quantum dots utilizable in molecular imprinting polymers capped quantum dots sensors

• Effect of metal coating pretreatment in dyeing acrylic fibers with cationic dye

• The effect of indicators in food stuff smart packaging: a review

• Mechanical properties of poly urethane foam coatings

• Synthesis of a disperse reactive dye and study its physical chemistry properties on nylon 6 fibers

• The effect of coating on the acoustical property of coated fabric

• The effect of fabric parameters on the acoustical property of coated fabric

• Investigation of wetting behavior of nanocomposite coatings containing MWCNTs during the UV exposure

• A study on the electrophoretic deposition of 3YSZ coating on AZ91 alloy plated by Ni-P electroless interlayer

• Electroless deposition of Ni-Sn-P coatings and study of their corrosion behavior

• Study of preparation and corrosion resistance of NiFe coatings

• Neem the Green Treasure

• Use of 8-hydroxyquinoline corrosion indicator in investigation of epoxy coated St-37

• The effects of ARB process on the thickness and vickers microhardness of alumina coating created by anodizing on the Al 1050.

• Dyeing behaviors of acid dyes on nylon6 fibers

• Investigation of the effect of filler shape and content on the permeability of latex films

• Effects of nano pigment on the corrosion resistance of Zinc-rich primer

• Influence of heat treatment in different mediums on the adhesion strength of clear coating

• Synthesis and characterization of waterborne polyurethane acrylate nanocomposite as uv-curable coating

• In-situ formation of polyaniline on textile fabric

• Supercapacitive behavior of graphene oxide/multiwalled carbon nanotube/polyaniline coating on graphite electrode

• Manufacturing an electrically conductive paint using an emulsion polymerization of aniline

• Rhodamine B dye and polystyrene sulfonate electrostatic interaction effect on flourescence

• Preparation and characterization of acrylic modified-silica nanocomposite coating via miniemulsion polymerization

• Absorption spectrum of trans and cis isomers of methyl red azo dye doped PMMA polymer and cis liftime measurment

• Preparation of UV-opaque Vis-transparent acrylic- modified SiO2 nanocomposite coating

• Study on biodegradability of poly(amide-imide) bearing imidazole groups

• Improving mechanical properties of water-based acrylic aoatings through changing the pH of the nanoparticles dispersions

• Effects of corona treatment on nylon 6 and dyeing properties

• Effect of anodizing and nano silica top coat on corrosion protection of recycled aluminum substrate

• Dye removal from binary system wastewater by graphene oxide; kinetic and isotherm studies

• Case studies to inhibit corrosion in pipes with turbulent flow Oil saturated sour with SRB bacteria by using the internal coating

• Effects of aqueous, organic and mixed phases on electrodeposition of polypyrrole thin film on nafion-based vulcan XC-72R electrode

• Modification method of GAP binder through copolymerization by PPG

• Electrochemical study of epoxy coating containing conductive polyaniline–ZnO nanocomposite on anodized aluminum alloys (2024-T3)

• Surface wettability and substrate temperature effects on inkjet-printed nanosilver lines: a review

• Investigation of two digestion methods for preparation of architectural paints for measuring of heavy metals content

• Rheological study of UV curable pigmented coating containing hydroxyl and mercaptan end groups hyperbranched polymers

• Investigation on zinc phosphate effectiveness on corrosion inhibition performance of scratched acrylic montmorillonite nano composite coated carbon steel.

• Study on planforms in evaporative poly(methyl methacrylate) solutions

• Effect of modification of nanoparticle on thermal stability of nanocomposite coatings containing nano zinc oxide

• Investigation of synthesis parameters on particle size in styrene emulsion polymerization

• Thermo-mechanical behavior of urethane/nano aluminum oxide composite

• Optimization of emulsion polymerization of self-assembled colloidal crystals

• Synthesis and surface modification of organic-inorganic hybrid particles of polystyrene silica as thermal insulator coatings

• Determination of photonic flux of semi-btach photo reactors used for wastewater treatment

• Purification of Wastewater in Petrochemical Companies by Electrocoagulation Method

• Extraction and removal of Azo dyes from industrial wastewater by polyurethane foams and membranes

• Investigation of the Performance of Modified CIE Tinting Formula

• Preparation of self cleaning and anti bacterial ceramic tile by sol-gel coating of silver doped nano anatase pigment

• Coating of ZnO–TiO2 nano composite on ceramic tiles by sol-gel and photocatalytic property study

• Eco-friendly dyeing of wool with crataegus elbursensis fruit natural dye

• Synthesis and characterization of acrylamide-co-acrylic acid copolymeric hydrogels

• Evaluation of surface properties of stainless steel brackets coated with Ti and Ag by the PVD method

• Improvement in dyeing behavior of the wool fabrics using nanosilver pre-treatment

• Using alternating least square and regression techniques for the characterization of digital cameras in non-uniform illumination conditions

• Investigating the effect of achromatic level and illumination/observation geometry on visually perceived specular gloss

• Thiol-functionalized silica nanoparticles for separation and removal of heavy metal ions from aquatic environments

• Degradation of reactive orange 1 in a semi-batch photocatalytic reactor (UV/ZnO-Ag)

• Effect of Trimethoxy(vinyl)silane on gel time and mechanical properties of polyester resin

• Antibacterial water base coating with silver nano-particles

• Extraction and application of eco-friendly natural dye obtained from iranian marigold flower on woolen yarns

• Effectual parameters on dyeing of woolen yarns by pistacia atlantica fruits as a natural dye and its fastness

• Effect of fuel combustion on WO3 photocatalytic activity to photodegradation of aquatic dye solution

• Preparation and evaluation of photoluminescence properties and photocatalytic activity of Na2W2O7 toward photodegradation of organic dye

• Removal of acid dye from colored wastewater by poly (DEAEMA-COHEMA) absorbent

• Study on the interaction of natural dye cochineal with FeSO4 (II)

• Spectrally selective absorber (SSA) surfaces: A review

• Synthesis and application of a novel heterocyclic reactive dye for cellulosic fibers

• Dye removal ability of modified nanofiber with triethylenetetramine

• Influence of polyvinyl alcohol concentration on microencapsulation by in situ polymerization

• Synthesis and application of a dichlorotriazine-based reactive dye for cellulosic fibers

• An investigation on the polymer’s behavior in sealants, influence of rheological factors’ changes and quality improvement of its problems

• Low temperature combustion synthesis of CoCr2O4 nano pigment

• Electrochemical impedance spectroscopy evaluation on the anticorrosive performance of epoxy/polyaniline –ZnO nanocomposite coated mild steel under cathodic polarization

• Direct electrospinning nanofibers composite of poly lactic acid/silver nanowire with core-shell structure

• Effect of graphene on electrical conductivity of polymeric nanocomposites

• A study on the effect of berberine extracted from barberry root on wool and cotton fabrics properties

• Investigation of the synergistic effect of potassium iodide (KI) on the corrosion inhibition properties of morus alba pendula leaves extract on mild steel in 1 M HCl solution

• Synthesis and spectroscopic characterization of acrylate terminated hyperbranched polyamidoamine

• Preparation of antistatic waterborne acrylic-polyaniline coating

• Single step dyeing and finishing cotton fiber with carboxylic acid and colloidal silver nanoparticles; reactive dye investigation

• Effect of pre/after-treatment based on polycarboxlic acids and nano silver on dyeability of cotton fiber with direct dye

• Effect of pre-treatment with BTCA/CA and colloidal silver nanoparticles on dyeability of cotton fiber

• NIR reflective cobalt based pigment: pechini synthesis and optical characteristics

• The influence of organic UV absorbers on the weathering resistance of an automotive clearcoat containing surface energy reducing agent

• Wrinkle resistance and anti UV by nanocoating, with no change in visual appearance

• Corrosion damage analysis of phosphated conversion coating and bare steel by image processing

• Study on hawthorn fruit for food color industrial with examination of antibacterial properties

• The correlation of color difference formulae with differential functions of white samples

• Effect of annealing temperature on optical absorption of lead-free perovskites

• Thermal conductivity of graphene/polymer composites

• Self-healing characteristics of praseodymium conversion coating on Magnesium studied using Scanning Electrochemical Microscopy

• Low VOC polyurethane coating

• Enhancement of carboxylated single- walled carbon nanotube properties on cotton fabrics using citric acid

• Effect of DMF and DMSO on the PEDOT: PSS inkjet ink properties

• Adhesion improvement of an acrylic-urethane coating on PP-EPDM bumper by mediated electrochemical oxidation

• Synthesize of a novel electrochromic material based on 4,4' bipyridine

• β-Ni(OH)2 as dye nanoadsorbent from contaminated water; kinetic and isotherm studies

• Modification of metal oxide nanocomposite and its dye removal ability

• Electrochemical and microstructural study of time effect on the room temperature zinc phosphate conversion coating

• Potoinduced anisotropy in Azo dye incorporated in polymer and liquid crystal

• Effect of sample size on colour fastness assessment

• Kinetic investigation of nickel and copper electroless plating on polyester fabric

• Photoluminescence and dyeabillity properties of polypropylene/phosphor strontium aluminate melt spun nanocomposite fiber

• Effect of Imidazole modified ZnO nanoparticles on the corrosion resistance of epoxy/polyaniline –ZnO nanocomposite coating on mild steel

• Preparation of nano zirconia ceramic powders via a facile rout

• Sublayer effect on the protective performance of black polyester resin

• Effects of nano-cellulose and additives on adhesion strength of acrylic coating used on beech wood

• Effect of curing time on physical and mechanical properties of MIO/synthetic rubber primer as weld joint coating of gas pipeline

• Mechanical properties of modified epoxy-acrylate UV-curable coatings by POSS and Nanoclay

• Influence of viscoelastic properties on the adhesion durability in epoxy coatings with mixed curing agents

• Effect of surface treatment on the protective performance of an eco-friendly silane sol-gel coating

• Evaluation of corrosion inhibition of 2-mercaptobenzoxazole on mild steel in 0.1 M NaCl solution

• Synthesis and characterization of microcapsule filled with linseed oil and investigation its self-healing properties

• Thermal stability of nanoclay-based pigments in polypropylene matrix

• Understanding the inhomogeneous structure of organic coatings: causes and consequences on corrosion protection

• Extraction and identification of volatile toxic solvents in PVC-based adhesives by GC-MS

• A study on environmental friendly silane primer on coil substrate

• Removal of organic dyes from aqueous solutions using synthetic polymeric adsorbents

• Fashion set design with an emphasis on color harmony using the interactive genetic algorithm

• Preparation and characterization of electrically conductive acrylic nanocomposite based on polyaniline nanofibers

• The role of curing temperature in the protective performance of silane coating containing 2-mercaptobenzoxazole on mild steel

• Evaluation of hybrid organosilane surface-treated nanoparticles on physical and mechanical performance of IIR based pressure-sensitive adhesives

• Investigation on O/W emulsion stability at constant HLB and different mixed emulsifiers

• Solvent effect on nanosilica surface modification by acrylic silane-tertiary amine coupling agent

• The study on effective factors in choosing weight function of spectrophotometric color matching

• Effect of type and content of reactive diluent on the mechanical properties of automotive UV-cured clear coat

• A primary study on text readability

• An experimental investigation on the use of fiber reinforced polymeric (FRP) coating for out of plane strengthening of masonry walls

• Investigation of Cu-coated polypropylene fabrics with printing and thermal spray methods

• Investigation of polypropylene textiles coated with Cu by electroless method

• Preparation of Dy2Ce2O7 nanostructures via a facile sol-gel method

• Synthesis of Dy2Sn2O7-SnO2 nanocomposites via a new simple rout

• Syn thesis and luminescent properties of forsterite nanoparticles doped with Eu3+ and Tb3 + by combustion and hydrothermal methods

• Comparison of effect of printing methods on photodegradation of its dye by using titanium dioxide

• Electromagnetic interference shielding effectiveness of electroless copper plationg onto cotton fabrics

• New trends to synthesis and application of polyvinyl alcohol

• Effect of gender on the color selections of headscarf regarding wearers’ complexion

• The effect of TiO2 nanoparticles on surface temperature of coated cotton fabrics

• Colour education in art and design

• The effect of chitosan on corrosion behavior of hydroxyapatite coating on AZ31 Mg alloy

• Investigation of particles size change with milling time on synthesis of a reactive disperse dye

• Removal of (Acid Red 18) dye from aqueous solution using an poly (DEAEMA-CO-HEMA) absorbent

• Corrosion resistance of black polyester and black alkyd – amine coatings on aluminum tubes

• Synthesis of ZnS:Mn nano-pigment for screen printing ink application

• Surface modification of non-woven polypropylene by plasma pre-treatment to enhance dye ability

• Dyeing properties of henna as a natural dye on wool using microwave irradiation

• Synthesis and optical properties of CdSe @ Y2SiO5:Ce3+ quantum composites

• Photostabilization of wood flour filled/polyvinyl chloride composites by addition of pigments during natural weathering

• Carbon Nanotube Coating on Glass Texture via Electrophoretic Deposition

• Corrosion resistance of black polyester and black alkyd – amine coatings on aluminum tubes

• Colorimetric study on ink-jet printing of polyester with various concentration of disperse dye

• Investigating the effect of dye concentration on color inconstancy index of the dyed fabric

• Hydrothermal synthesis and optical properties of CdSe quantum dots

• Designing a play station by applying colors in Six thinking hats technique

• Catalytic ozonation process for removal of methylene blue and reactive black 5 dyes using activated carbon produced from egg shell modified by magnesium oxide: determination of optimum process conditions using taguchi method

• Study of masks used in glass etch industry

• A review on the polyelectrolyte microcapsules for smart anticorrosion systems

• The effect of sol-gel based silane film loaded with functionalized graphene oxide on the corrosion protection performance of epoxy coating on the steel substrate

• Luminescent polypropylene/rare-earth phosphor strontium aluminate fibers: morphology and structural properties

• Hyperbranched azo-polymers derived from a pyrazolone-based AB2 type monomer: aggregation behavior in aqueous and non-aqueous media

• Ultrasonic synthesis of ZnO nanorods for coating and pigment applications

• Novel green chemical method for synthesis of cupric oxide nanopigment from a biomolecule of protein building block

• Synthesis of novel TiO2 hybrid nanoparticles sensitized with organometallic bioporphyrin containing deoxyadenosine chain

• Synthesis and study on the influence of cobalt content on properties of hybrid TTBPc/Co-TiO2 nanocomposites

• Comparison of air and oxygen influence on amount of electrical energy consumption in photocatalytic degradation of AB74

• Investigation of physical and mechanical properties of decolorized blue jeans with KMnO4

• Application of poly(diethyl- amino – ethyl) polymeric adsorbent for reactive dye removal of the industrial wastewaters

• Electrochemical investigation of the synergistic effect between Cichorium intybus leaves extract and zinc acetate on the corrosion inhibition of carbon steel in 3.5% NaCl solution

• A review on basic structure of dyes used in solar cells

• Dyeing of cotton fabric with the saffron petals

• Color yield enhancement of dactylopius coccus dye on wool via an eco-benign method

• Influence of heat treatment of sycamore and spruce wood on tensile adhesion strength of transparent coatings

• Review of environmentally-friendly paints for fouling control in the marine environment

• Effect of heat treatment on adhesion strength of clear coatings in beech and poplar wood

• Depositing hydroxyapatite (HA) composite coating on Ni-Ti alloy by Al additive

• A brief classification to new corrosion inhibitors in reinforced concrete

• Production of fshion camouflage based on background color by using image processing and interactive genetic algorithm

• A review on self-colored waterborne polyurethanes

• Comparison image color-reduction methods based on FCM, K-Means and SOM to fabric printing

• Cochineal dye up-take enhancement on wool with chitosan-cyanuric chloride treatment

• A challenge to different mechanisms of inhibition in reinforced concrete structures

• Synthesis of iron oxide pigments from rolled steel scrap

• Effect of temperature on magnetic properties of SrFe12O19 synthesized via coprecipitation method

• Comb-like polycarboxylate polymers as modern superplasticizers in concrete

• Investigation on the reasons of lack of prosperity in commercializing the research outputs in paint and resin Industries

• Fundaments of electromagnetic wave absorption in absorber coatings

• Application of mixture experimental design for optimizing skid resistance and dirt pick-up properties of two-component cold plastic traffic paints

• Photocatalyst and anti bacterial synthetic leather by Ag & TiO2

• Investigation of crystallinity effects on the surface of oxygen plasma treated poly(ethylene terephthalate)

• Bioproduction of ß-carotene from microalgae

• Fog-Harvesting potential of metal coated polyester fabrics

• Optimization of carbon nanostructures on the electrical resistance of polyester fabric

• A review on synthesis of tetraethoxy silane, used in surfase coatings

• Synthesis and characterization of PNS used as a dispersing agent

• Correlation between colorimetric parameters and physicochemical properties of Iranian raw cane sugars

• Isolation and characterization of red pigment producing Haloarcula sp

• Corrosion inhibition effect of an indole based corrosion inhibitor on mild steel in 1MHCl solution

• The investigation on the relation between curing condition and mechanical properties of two part epoxy resins

• A review on hydrolysis of tetraethyl orthosilicate in presence of ammonia as catalyst: effect of solvent on silica particle size

• Introducing the benefits of powder coating as an industrial coating technology compared with conventional liquid paint

• Latest developments in automotive finishing

• Investigation of temperature and concentration of silane coupling agent in chemical modification solution to prepare superhydrophobic surface on 316 stainless steel

• A Study of graphene nanolayers application in new generation of transparent conductive thin films

• Investigation on the microstructure and corrosion properties of Co-P electrodeposition coating

• Optimized zirconia coating on stainless steel substrate by electrophoretic deposition

• Identification of coating (varnish) on paper manuscript written by mahmood Ebn abelqasem khansari (belonged to isfahan decorative arts museum)

• Energy consumption reduction using interior color design

• Comparison of performance of characterization of colorants in transparent media with single colorant and mixture of colorants methods

• reusable nano biosensor based on turn-on fluorescence nanofibers with high sensitivity for biological sensing of toxic Mercury (II) ion

• Ph sensitive fluorescence probe for biological application based on a fluorescence UV-cured Dye-MAA Copolymer

• Epoxy’s toughening by CO2 fixation reaction

• Synthesis and optical properties of CdSe quantum dots - silica aerogel nanocomposites

• The effect of color sample numbers recommended by CIE on general color rendering index calculation

• Preparation and adsorption behavior of diethylenetriamine/polyacrylonitrile composite nanofibers for a direct dye removal

• Electrospinning of polyacrylonitrile/polyamidoamine composite nanofibers as a novel adsorbent with high dye removal capacity

• Surface grafting of polyamidoamine dendrimer onto polyacrylonitrile nanofibers for removal of anionic dyes

• Plasticizers, health effects and replacing them interchangeably at industrial applications

• Effect of passive shells and reductant agents on luminescence properties of CdSe quantum dots