07th International Congress on Chemical Engineering, آبان ماه ۱۳۹۰

Accepted papers in 07th International Congress on Chemical Engineering

• Modeling of Hydrodynamics of Packed Columns in Wet and Dry Condition

• Effect of modified MWNTs on electrical and thermal conductivity of epoxy-MWNTs nanocomposites

• Effect of particle size of water-base core-shell latexes of butylacrylate and methylmethacrylate on minimum film formation temperature

• The Effect of Spatial Resolution on the Swirl Intensity and the Size of Vortical Structures

• Gas holdup in bubble column With non-Newtonian fluids

• Investigation of mechanical and thermal properties of different modifiedMWNTs-epoxy nanocomposites

• Fabrication of Novel organic-inorganic hybrid membrane for adsorption of heavy metals from aqueous solution

• Estimation of Sodium Bicarbonate Crystals Size Distribution in Bubble Column Reactor

• Investigation of Gas holdup in Slurry Bubble Columns at Elevated Pressures

• Two-phase Frictional Pressure Drop in Horizontal Channels

• Effect of calcination temperature on photocatalytic activity of TiO2 nanoparticles for degradation of methyl orange

• Scaling of the turbulent boundary layer subjected to an adverse pressure gradient

• Experimental Study on the Effect of Oscillation on Turbulent Air Flow through a Ninety Degree Bend

• Flow field of rarefied gases in suddenly expanded/contracted micro-and nanochannels using direct simulation Monte Carlo method

• Effect of template source on hydrothermally synthesis of SAPO-34 molecular sieves with small crystals

• Modeling friction factor in Annular Slug flow in inclined pipes by genetic algorithm

• Application of methanol absorbent for CO2 removal in gas-liquid hollow fiber membrane contactors

• Evaluation of Algae Marine Ulva lactuca for the Biosorption of Zn(II) from Aqueous Solutions

• Lattice Boltzmann Simulation of Heat Exchanger Filled by Porous Mediume

• The effect of vibration on PEM fuel cell performance

• Prediction of equilibrium water loss during osmotic dehydration in green bean using artificial neural network

• Photocatalytic removal of furfural in wastewater using UV light in the presence of TiO2 nanoparticles and determination of degradation mechanism

• Flow about a cam shape cylinder between parallel walls

• Cluster characterization in the freeboard of a fluidized bed by the wavelet analysis

• CFD simulation of catalytic naphtha reforming process

• study of mixing time of non-Newtonian fluids in stirred tank

• Effects of impeller system on the solids distribution in a stirred tank

• A Theoretical Model for Calculating the Effective Diffusivity of Gases in A Porous Pellet Composed of Two Different Grains

• Multi-objective optimization of humidifier condition for desalination unit

• effect of crosslinking on natural gas permeation through polyimide membranes

• Investigation of flow Maldistribution in Trickle Bed Reactors Dense and Sock Loading Beds

• Experimental Hydrodynamic Study in Two Phases Airlift Reactor and Effective Parameters on Column's Gas Hold up

• Experimental Study of Geometrical Effects With Internal Loop on Gas Hold up and Flow Pattern in Gas-Liquid Bubble Column Reactor

• Monitoring of Gas Pipelines Treatment; Suggestions through Practical Studies

• Investigation of the optimum number of heat pipe rows in HPHX used for energy saving in an air conditioning system

• Experimental study of TiO2/Turbine oil nanofluid convective heat transfer

• Modeling of Equilibrium and Breakthrough Curves of Multi- Component Adsorption in a Two-Layered Fixed Bed for Purification of Hydrogen from CO2, CO, N2 and CH4 mixture

• parametric analysis of indirect evaporative coolers

• thermal comfort analysis of direct evaporative coolers

• Estimation of Mass Transfer Coefficient in Different Regions of Forced Circulation Airlift Loop Reactor

• Numerical study of drag reduction using micro bubbles in a vertical Couette-Taylor system

• Uranium Recovery from Isfahan’s UCF Plant Solid Waste Using a Pulsed Sieve-Plate Column

• Investigation on Effect of Nanoparticles Sedimentation on Thermal Conductivity of SiO2 Nanofluids

• ANN model for effective diffusion coefficient of water loss in osmotic dehydration of geen bean

• Investigation on Effect of Particle Size and Base Fluid on Thermal Conductivity Enhancement of SiO2Nanofluids

• Influence of Solid Particles Presence on Mass Transfer Coefficient in Slurry Stirred Tank Reactor

• Modeling of Adsorption of Light Mercaptans from Natural Gas using Pore Network Model

• a short review on spouted beds hydrodynamcis

• Mass transfer Enhancement in Liquid-Liquid Extraction Using Modified Nanoparticles

• Modeling of a membrane system for nitrogen removal from natural gas

• Effects of PBTU30° & Rushton impeller combination on mixing time in stirred tanks

• Acridine solubility in supercritical carbon dioxide: Experimental and modeling

• Adsorption of dibenzothiophene by copper- and copper oxideimpregnated activated carbon fibers

• The information entropy approach to modeling of flash evaporation process ideal mixture

• A new Peng-Robinson based association equation of state to predict properties of associating compounds

• Influence of temperature and polymer mass fraction on density of polyetherimide solution in N-methyl-2-pyrrolidone and Chloroform solvents

• Generalized Electrolyte-UNIQUAC-NRF Model for Calculation Phase Diagram and Solubility of Mixed Electrolyte in Aqueous Solutions

• Surface Tension Prediction for Binary Liquid Mixtures

• A genetic algorithm based Peng-Robinson equation of state for solubility modeling of cinnamic acid in supercritical carbon dioxide

• Experimental study of methane hydrate formation in the presence of tetrahydrofuran and sodium octyl sulfate as promoters

• Comparison of the OPLS-UA and TraPPE-UA force fields for prediction of viscosity of methanol and ethanol

• NRTL and UNIQUAC Models for Liquid–Liquid Equilibrium in the System of Furfural and Light Lubricating Oil

• Influence of Composition on the Linear Viscoelastic Behavior and Morphology Properties of Polycarbonate (PC)/Acrylonitrile- Butadiene-Styrene (ABS) Blends

• Dehydrogenation of propane-isobutane mixture: A thermodynamic analysis

• Gibbs energy minimization method for analysis of non-oxidative methane dehydroaromatization

• Vapor – liquid equilibria of ternary systems with 1methyl 3octylimidazolium thiocyanate using headspace gas chromatography

• Ternary liquid–liquid equilibria for (water + 1,3-butanediol+ 2- ethyl-1-hexanol or decanol) systems at the temperature 298.2 K

• A New Local CompositionModel for Phase Equilibrium Calculation of Binary Polymer Solutions

• Electrolyte Cubic Square-Well Equation of State for Computation of the Solubility of CO2 in Aqueous Salt Solutions

• Thermodynamic Analysis of Combined CO2 and O2 Reforming of Methane to Produce Syngas

• An Efficient Method for Predicting Natural Gas Compressibility Factor

• An Efficient Method for Calculating Natural Gas Viscosity

• A Neural Network Approach to Predict Heat Capacity of Ionic Liquids

• Investigation of binary mixture phase equilibrium by molecular dynamic simulation

• A new electrolyte cubic plus association equation of state for strong electrolyte solutions

• New Thermodynamics Model for Solvent Activity of Aqueous Polymer Solutions

• Thermodynamics model for non-aqueous polymer solutions

• Application of NRTL, UNIQUAC and NRTL-NRF models for Ternary Liquid-Liquid Equilibrium Systems Including Ionic Liquids

• Effect of Temperature Functions a (T) on Prediction of CH4 and N2 Gas Hydrate Formation Conditions

• Experimental study of R22 (CHClF2)hydrate formation kinetic in the presence of SDS surfactant

• Experimental study of R600a and R436A to replace R134a in a domestic refrigerator and freezer

• A Thermodynamic Model for Estimating Acid Gas Solubility in Aqueous Alkanolamines

• Prediction of methane hydrate formation pressure: learning data under conditions of different temperature and salinity

• Prediction of Spinodal Instability Island of Poly(vinyl chloride)-Poly(vinyl acetate)-Dioctyl phthalate Ternary System, Based on Compressible Regular Solution (CRS) Model

• Measurment and correlation of liquid-liquid equilibria of water+2-butanol+2-ethyl-1-hexanol ternary system

• Estimation of interaction parameters of UNIQUAC model by Genetic algorithm

• Determining sublimation pressure of some anti-inflammatory drugs from solubility data in supercritical carbon dioxide

• Development of a new Peng-Robinson Plus Association equation of state for water and alcoholes

• Extension of PHSC equation of state to electrolyte solutions

• Application of PC-SAFT Equation of State for Prediction of Liquid-Liquid Equilibrium in Ionic Liquids Mixtures

• Calculating the NRTL and UNIQUAC binary interaction parameters using the experimental flash point data

• Calculation of Surface Tension of Pure Organic Liquids by Using MMM EOS Coupled Scaled Particle Theory

• Application of Electrolyte Cubic Square-Well Equation of State for Prediction of the Gas Hydrate Formation in the Presence of Electrolyte Solutions

• a new model for calculation of surface tension of aqueous electrolyte solutions

• LLE data for separation of aromatic hydrocarbons (benzene and toluene) from aliphatic hydrocarbons (hexane and heptanes) with ethylene glycol solvent

• Volumetric properties of binary mixtures of ionic liquids (benzene+1-butyl-3-methylimidazolium tetrafluoroborate and benzene+ 1-butyl-3-methylimidazolium hexafluorophosphate) using equation of state

• Prediction of Liquid-Liquid Equilibria of Binary Systems Using EoS-GE Models

• Evaluation of Equations of State to Predict Interfacial Tension in the Binary Systems

• Numerical Procedures for Calculating Sound Speed of Natural Gas

• adsorption thermodynamics of copper on dried activated sludge

• Modeling of hydrocarbon+water phase equilibria using CPA EOS

• Applications of Ionic Liquids a Special Focus on Gas Purification

• Dielectrophoretic technique for separation of o/w nanoemulsion

• Influence of Iron on Uranium Adsorption by Strong Base Resin in Acidic Solution

• Prediction of Maximum Throughput in Pulsed Disc and Doughnut Extraction Columns

• Investigation Langmuir and Freundlich Equations in the Removal of Manganese Ions from Aqueous Solution Using Polyaniline Nanocomposite

• Direct contact membrane distillation for desalination: Membrane characteristics approach

• Liquid-Liquid Extraction of phenol from aqueous solutions

• Evaluation of 4-chlorophenol extraction from aqueous solution by kerosene

• Application of sweeping gas membrane distillation for concentration of glucose syrup

• Solvent extraction of silver from nitrate solutions by mono/di 2- ethylhexyl phosphoric acid ester (MDEHPA)

• Separation of ethanol-water mixtures using sweeping gas membrane distillation: Experimental approach

• Extraction of 4-chlorophenol from aqueous solutions by emulsion liquid membrane

• Compar ison of Synthesis of A lPO4-5 and C oAPO-5 Nanozeolites

• Effect of Hydrothermal Parameters on Synthesis of Nano-AlPO4-5

• Synthesis and characterization of nanostructure MFI zeolite membrane

• Addition of anionic surfactant to cellulose acetate nanofiltration membrane: Preparation, morphology and performance in the removal of pesticides

• A model for simultaneous simulation and phase identification in reactive distillation columns

• kinetic study of nitrate adsorption from aqueous solution using modified rice husk

• biosorption of hexavalent chromium by acid-treated brown algae sargassum bevanom from aqueous solution

• The electrochemical characterization of PVC based heterogeneous cation exchange membrane modified by an oxidizing agent in the casting solution

• Reactive distillation in complex columns by McCabe-Thiele method

• Extraction equilibrium of Copper (ΙΙ) from aqueous solutions by lauric acid /benzene

• Investigation of Adsorption of heavy metals from Industrial Wastewater With Bentonite.

• Sol-gel synthesis of nanoamorphous SiO2 in non-aqueous system of tetraethylorthosilicate

• Experimental Investigation of Adsorption of heavy metals from Industrial Wastewater With Vermiculite.

• Hexavalent Chromium Removal from Aqueous Solution by Adsorption on Multiwalled Carbon Nanotunes: Equilibrium and Thermodynamic Studies

• Stage Efficiency of a Pulsed Disc and Doughnut Extraction Column

• Investigating the synergistic effect of D2EHPA and Cyanex 302 on nickel and cadmium sepration

• Pore Blocking as the Fouling Mechanism in Carrot Juice Clarification by Microfiltration

• Permeation properties of a graded structure composite ceramic membrane prepared by CVD method

• Pervaporation separation of water/isopropanol mixtures with poly(vinyl alcohol) membranes crosslinked with fumaric acid :Effect of crosslinking time on the mechanical and separation properties

• Oxidative desulfurization (ODS) of Iranian high sulfur gas oil feedstock

• Evaluation and simulation of eco-technical study of the membrane separation of hydrogen from hydrogen/methane/ethylene mixture

• Preparation and characterization of (PVC-blend-SBR) mixed matrix gas separation membrane filled with zeolite

• Theoretical Phase Diagram Calculation Based on a Compressible Regular Solution Model for Water-Dimethylsulfoxide-Polyethersulfone Ternary System

• Clarification of rough non-alcoholic beer by ceramic membranes: analyses of fouling and beer quality

• A new concept to preparation of thin film nanocomposite nanofiltration membrane by interfacial polymerization as an approach to solve biofouling problem

• New method for design and optimization of heat integrated distillation columns

• The use of CNT in liquid phase to improve CO2 absorption in a bubble column metsys

• Competitive adsorption of Cu2+ and Zn2+ ions from aqueous solutions by oxidized carbon nanotubes

• The Effect of Type and Concentration of Surfactant and Ligand on Urani um(VI) Cloud-Point Extraction (CPE) from Aqueous Solutions

• Desalination of sodium chloride solution using membrane distillation

• Supercritical CO2 Extraction of Essential oil from pimpinella affinis Ledeb.;Influential Parameters

• Methds to increase Performance of Activated Carbon Filters in 4 gas sweetening units in South Pars Gas Complex, Phases 2&3

• Synthesis and characterization of perovskite membrane for hydrogen separation at high temperature

• A comparison between different mathematical models for prediction of the drying behavior of some agricultural products

• Cost Minimization by Genetic Algorithm and Energy Consumption Investigation in Separation of Ternary mixture

• Removal of Aromatic Compounds from Aqueous Solution of Diethanolamine Using Activated Carbon Adsorption

• Experimental Study of Batch Electrodialysis Process in Separation of Sodium Sulfate from Magnesium Stearate Aqueous Slurry

• Carbon dioxide removal via a polymeric membrane: a study on the membrane properties from the process point of view

• Simulation of Multi-Step Pressure Swing Adsorption Process for Production of Pure Hydrogen with High Recovery

• Preparation and Characterization of Ceramic Ultrafiltration Membranes

• Comparsion Between Air Backwashing and Chemical Cleaning on Fouling in Hollow Fiber Membrane Bioreactors (MBRs)

• Effect of Temperature on the Rate of Mass Transfer in Liquid - Liquid Extraction

• Effect of Haydraulic Retention Time on Membrane Fouling and Biomass Growth in Membrane Bioreactor (MBR)

• Preparation and characterization of antibacterial polyethersulfone ultrafiltration membrane

• An artificial neural network-based method to predict adsorption of heavy metal ions from aqueous solutions

• Dynamic Study of Fe(II) Removal from Aqueous Phase by Chitosan Adsorbent in a Fixed Bed Column

• Using backwashed microfiltration as a pretreatment for ultrafiltration of oily wastewater

• Optimization of operating conditions for a hollow fiber ultrafiltartion membrane module using Taguchi method

• Fabrication and Characterization of polyimide mixed matrix membranes containing functionalized MWCNTs by beta-cyclodextrin

• Hydrodynamic and Mass Transfer Modeling of Ion Transport through Nanofiltration Membranes

• Extraction of Essential oil From Pimpinella Affinis Ledeb by Ultrasonic Method

• The Influence of Thermosonication Process on the Tomato Juice Clarification by Filtration Method

• Adsorption of Chromium Ions from Aqueous Solution by Activated Carbon Adsorbent

• Microbial methane oxidation from coal mines applying a biofilter

• Modeling of spherical zeolite 3A matrix for maximum water adsorption from natural gas

• Polyimide mixed matrix membranes: preparation and characterization for CO2 selective separation

• Mixed matrix membrane performance prediction for gas separation using modified Maxwell model

• Effect of emulsion liquid membrane stability on Vanadium separation efficiency

• A Probe into The Germanium and Zinc Dissolution Behaviour Through Washing Process of Zinc Plant Residue

• Separation Recovery of Zinc, Cobalt, Manganese and Ferrous From hot filter press cake

• Preparation and Characterization of Carbon Molecular Sieve Membranes for Water Treatment

• Comparison of SAPO-34 Zeotype and T type Zeolite Molecular Sieves in CO2/CH4 Separation Process

• Pervaporation study of ceramic-supported thin PVA membranes in dehydration of ethanol: Effect of PVA coating gel concentration

• Fabracation and Characterization of Amidoximated Polyacrylonitrile

• Application of Genetic Algorithm to Calculate the Binary Interaction and Non-Randomness Parameters of the NRTL model for Ternary Ionic Liquid Systems

• Study of the Effective Variables on Morphology and Deposition of CaC03 on the Metal Surface

• Critical concentration determination of polyetherimide membrane for gas separation

• Application of response surface methodology for the extraction and enrichment of silver from aqueous solutions by emulsion liquid membrane

• Removal of Pb(II) from aqueous solutions by natural nano hydroxyapatite

• Modeling of ternary gas separation in hollow fiber membrane

• Recovery and Enrichment of Alpha Amylase by Batch Foam Fractionation

• Separation of CO2 from CH4 using nanocomposite membranes

• Effect of fabrication parameters on the performance zeolite filled composite pervaporation membranes

• CO2 Hydrate Formation in Falling Film of Water

• separation of CO2 throughfacilitated transport membranes

• Investigation of Methane Adsorption Isotherm on Activated Carbon at Low Temperatures Via Artificial Neural Network

• Coalescence of Water Drops in Oils under Pulsatile Electric Fields

• Studies on the effect of surface properties of magnetite nanoparticles on the lanthanide ions adsorption

• Arsenic seperation from arsenic-copper solutions via electrowining

• Investigation of Hydrodynamic of liquid–liquid extraction system in presence of TiO2 nano-particles

• Fabrication of porous PVDF hollow fiber and flat membranes by immersion precipitation using Taguchi experimental design

• Preparation of High Density Polyethylene (HDPE) Membranes via Thermally Induced Phase Separation

• Effect of cooling bath on LLDPE microporous membrane structure in thermally induced phase separation

• Preparation of isotactic polypropylene microporous membranes via thermally induced phase separation (TIPS) method.

• A novel hydrophilized blended HDPE/EVA microporous flat sheet membranes via thermally induced phase separation (TIPS) method

• Study of Decolorization Variety by Electrocoagulation Process in the Removal of Dye Solution Containing Remazol Yellow G: Optimization of Effective Parameters Using the Taguchi Method

• Fabrication and Performance Evaluation of Nanostructure Ceramic Membranes in the permeation of a-La and -Lg whey proteins

• Performance of Nanocomposite Hydroxy Sodalite-Palladium Membrane for the Separation of Hydrogen from n-Pentane

• Parametric studies on the performance of LTA zeolite membrane in water/alcohol pervaporation

• Synthesis and characterization of B-ZSM-5 zeolite membranes

• Affecting parameters on the microstructural morphology of polysulfone membranes via nonsolvent induced phase separation

• Uranium Recovery from Wastewater using Tri-n-octyl amine and Di-2 ethyl hexyl phosphoric acid

• Separation of propylene/propane via pressure swing adsorption using SiCHA

• Numerical Simulation of a Pressure Swing Adsorption for Air Separation

• Computational fluid dynamics analysis of heat transfer in oscillating flow through a channel filled with metal foam

• Vacuum Drying Characteristics of Kiwi Fruit Leather (Lavashak)

• Application of Neural Network to Predict Slug Liquid Holdup of Two Phase Flow in Horizontal Pipes

• Kinetic modeling of supercritical antisolvent crystallization (Phenanthrene-Toluene-CO2)

• The effect of bipolar plate material and clamping pressure on the performance of proton exchange membrane fuel cell

• Thermodynamic Modeling of Antisolvent Crystallization of NaCl-Water-Ethanol System

• Computational Prediction of Stability of Alumina Nanoparticles Dispersed in Aqueous Medium Using Discerete Element Method

• Prediction of the Mechanical Properties of LDPE-Thermoplastic Corn Starch Nanocomposites Using the Adaptive Neuro-Fuzzy Inference System

• Chemical absorption of carbon dioxide from Zergan power plant

• Heat exchanger network synthesis with considering pressure drop by coupling Genetic Algorithm with Linear Programming method

• Numerical Investigation of Current Density of a Microbial Fuel Cell

• Prediction of steam distillation efficiency during steam injection process by Artificial Neural Network

• Hybrid ANN and mathematical modeling of a methanol synthesis fixed bed reactor

• Mathematical modeling and simulation of styrene monomer reactor: a Case Study

• Modeling and Simulation of an Industrial Hydrogen Purification Unit inPressure Swing Adsorption Process

• The Multi-Objective Optimization of Shazand Refinery’s Hydrocracking Unit

• Successive non-catalytic gas-solid reactions modeling for the hydrogen reduction of metal sulfides mixed with lime

• Numerical Simulation of Thermophoretic Particle Deposition from a Turbulent Flow of Air inside a Chamber

• Prediction of improved cyclone system efficiency: Multi objective optimization by hybrid approach based on the genetic algorithm and artificial neural network

• Alternative Methods for Conventional City Gate Station

• Axial Dispersion Plug Flow Model for Methanol Dehydration Reactor

• Modeling of electrooxidation of phenolic wastewater

• Modeling and Simulation of Self-Lifting Method for Suppressing of Severe Slugging in Pipeline Risers

• A developed mathematical model for capturing carbon dioxide from gas streams by polymeric membranes in a concentrationdependent system

• Modeling and Simulation of a Methanol-To-Olefines Fixed-Bed Reactor in Steady-State and Dynamic Conditions

• Modelling and simulation of Continuous Catalytic Regeneration (CCR) Process

• Simulation and Modeling of Catalytic Reforming Unit

• Experimental and Modeling Investigation of Supercritical Carbon Dioxide Extraction of Aloe vera leaf skin

• Model Predictive Control of an Autorefrigerated Polymerization Reactor

• Dimethyl ether production in a novel fluidized bed membrane reactor: Modeling and simulation

• An experimentally measurement of pressure gradient in gas-liquid upward through vertical pipes.

• Application of hydrogen-permselective Pd-based membrane in fixed bed reactor for dimethyl ether synthesis

• Pore Network Investigation of Hydrate Dissociation Behavior in Porous Media

• Kinetic Modeling Of Naphtha Thermal Cracking

• Co-production of Hydrogen and Methanol via Auto-thermal Methanol Synthesis Process in the Recuperative Fluidized-Bed Reactor

• Prediction of vapor liquid equilibrium data of CO2 in aqueous solution of methyldiethanol amine using thermodynamic and artificial intelegent models

• Mathematical Modelling of Biohydrogen Production in an EGSB Reactor Utilizing Computational Fluid Dynamics

• Modeling of Methane Reformer to Syngas Using Artificial Neural Networks

• Numerical Modeling and Parametric Analysis of Solar Vented Room Using Two Dimensional k-e Turbulence Model

• Simulation and Control of a Nonlinear CSTR System by Fuzzy-Logic Controller and Comparison with Traditional Controller

• Modeling of Methane Adsorption in Carbon Nanotubes by Molecular Dynamics Simulation

• Simulation of Fast Filling Process for Natural Gas Vehicle (NGV) Fuel Tanks Based on AGA-8 Equation of State

• Modeling and simulation of two-dimensional population balance equations

• Modeling and simulation of arsenic (V) extraction from water by emulsion liquid membrane process using artificial neural networks

• Modeling, Simulation and Optimization of Catalytic Naphtha Reforming Unit and Proposing a Model for RONC

• An optimal steady-state design of methyl acetate reactive distillation column

• a simple and robust lumped model for heat and mass transfer of ANG tanks

• Steady state and Dynamic simulation of atmospheric distillation unit of Shiraz Refinery

• artificial neural network for modeling of OCM reaction

• Modeling and Simulation of Thermal Cracking Reactors Equipped with ceramic rod

• Mathematical Modelling of a Batch Fluidized Bed Dryer Using a Distributed Mass Transfer and a Lumped Heat Transfer Model

• Modeling and Simulation of Hydrogen Sulfide Absorption with Amine Solutions in a Wetted Wire Column

• Modeling and Simulation of Absorption Column of Natural Gas Sweetening Unit by Mass Transfer Method

• Hierarchical hybrid fuzzy-neural networks for modeling of activated carbon preparation for methane storage

• Optimization of Energy Flow Model Function for a Case Study in Iran by Genetic Algorithms

• New developments in the production of biodiesel via Esterification and Transesterification method using Aspen Hysys software

• Mathematical modeling and steady-state simulation of catalytic naphtha reforming using artificial neural networks

• 2-D pore network model of the isothermal drying: A study on the effect of pore structure distribution

• Study and Design Glycol Dehydration Units for Maximum Efficiency

• Instability Analysis of Miscible Displacements in Porous Media

• CFD simulation of enhancement of heat transfer in tubes by means of wire coil inserts

• Investigation of bubble column Hydrodynamics Using CFD Simulation and Experimental validation of non-Newtonian Fluids

• CFD and Experimental Studies on Cone Cap Tray Hydrodynamics

• CFD Simulation of Taylor Bubble Mass Transfer in Monolith Reactors

• CFD simulation of hydrodynamics in a split-cylindrical airlift reactor containing surfactant solution

• CFD Simulation of Oxygen Mass Transfer in a split-cylindrical Airlift Reactor containing surfactant solutions

• Effect of Symmetry on the Hydrodynamics Parameters of Sieve Trays Using CFD

• Design and modeling study of a curved channel passive micromixer for chemical and biomedical applications

• Investigation of Screw Turning and Barrel Turning Boundaries in Single Screw Extruders by OpenFOAM cfd Software

• Experimental and CFD studies on heat transfer enhancement using high frequency ultrasound waves

• Large eddy simulation of a tree-stream jet-in-hot-coflow flame

• CFD Investigation of Convective Heat Transfer in Helically Coiled Tube Heat Exchangers

• Study of packed vane filter efficiency by CFD simulation

• Evaluating the Effect of Turbulent Dispersion Models on the Simulation of a Vane Liquid-Gas Separator

• Validation of CFD-DEM Model for Size Segregation of Binary Mixtures in Gas-Solid Fluidized Beds

• Hydraulic Analysis of Two Phase Flow in Helical Pipes: Turbulence and Population Balance Modeling

• CFD simulation of influence of configuration on the performance an external reactor

• Hydrodynamics Modeling of a Commercial Scale Trickle Bed Reactor Using CFD

• Experimental and CFD Investigation of a Cylindrical Chamber with jet impingement stream in a new de-dusting system

• Numerical Simulation of Heat Transfer Enhancement in a Heat Exchanger Using Porous Material

• Analytical Investigation of Forced Convection Heat Transfer in a Channel Partially Filled with a Porous Material under Local Thermal Non-Equilibrium Condition

• The Bubble Breakage Effects on Hydrodynamics of Bubble Column Reactor by CFD Techniques

• Computational simulation of turbulent channel flow in transverse magnetic field

• CFD Investigation of ejector effects on High-Pressure Atmospheric Burners in different Air/Fuel ratio

• 3D CFD Simulation for Black Powder-Natural Gas Cyclone Separator in Qom Compressor Station

• Different Approaches for CFD Simulation of Gas-Liquid Two Phase Flow through the Trickle-Bed Reactors

• CFD Based Simulation of Hydrodynamic and Nucleation under Subsonic Conditions at the RESS

• Evaluation of Multiphase Approaches and Turbulence Models for Industrial CFD Simulation of Stirred Bubble Column Reactors

• Modeling of Heat Transfer and Fluid Flow Characteristics of Helicoidal Double-Pipe Heat Exchangers Using CFD Simulation

• CFD Modeling for velocity and pressure distribution in a flat membrane module

• Computational Fluid Dynamics modeling of a pilot-scale autothermal reforming process

• Power law kinetic equation of the Fischer–Tropsch synthesis on cobalt catalyst

• First Principle Investigations of Bulk Properties and Catalytic Reactions for Cubic Perovskite Catalyst on OCM High Temperature Process

• A new kinetic modeling of the Fischer-Tropsch synthesis in a slurry bubble column reactor using Langmuir-Freundlich isotherm

• Design of a Fixed Bed Reactor to Produce One-step DME from Syngas in Industrial Scale

• Kinetic Analysis of a New Commercial Multi-site Ziegler-Natta Catalyst Using Deconvolution of Molecular weight Distributions for Ethylene Homopolymers

• Investigating Key Parameters Effects on Catalytic Dehydration of Methanol to Dimethyl Ether

• Modeling of the Fischer-Tropsch Synthesis in a fixed bed reactor using a new kinetic model based on the Langmuir-Freundlich isotherm

• Dehydrogenation of propane over Pt-Sn/θ-Al2O3 catalyst prepared by co-impregnation: the influence of the solvent

• The deactivation of active sites in liquid-phase alkylation of isobutane with butenes

• The Promoter Effects and Pressure in Fischer-Tropsch iron-manganes catalyst

• Development of a Macro Kinetic Expression for the Iron-based Low-Temperature Fischer-Tropsch Synthesis

• Carbon Monoxide Oxidation over Iron – Cobalt Mixed Oxide Nanocatalysts

• Effect of Calcination Temperature on Structural Properties of Iron-Cobalt Nanocatalysts in Low-Temperature CO Oxidation

• CO Oxidation over Iron Oxide Nanocatalysts Prepared via Different Methods and Precursors

• Dry reforming reaction over nickel catalysts supported on calcium aluminates with different CaO/Al2O3 ratios

• A lumped kinetic model for conversion of methanol to propylene (MTP) process using HZSM-5 nano catalyst

• Kinetics of Nitrogen Release in Polyethylene Coated Urea

• Influence of activation temperature of constructive lime as heterogeneous catalyst in biodiesel production from canola oil

• Mechanism reduction process using DRGEP method for simulating the combustion in an n-heptane fueled HCCI engine

• A New preparation method for LaNiO3 perovskite for dry reforming of methane

• The Effects of External Magnetic Field on performance of Ni and Co Catalysts in Partial Oxidation of Methane

• Optimization of Operating Parameters of Continuous Catalytic Naphtha Reforming Process using Response Surface Methodology

• Mathematical Modeling and Simulation of Hydrotreating (HDS, HDN and HAD) of Gas oil in Commercial Trickle-bed Reactor

• Modeling and Optimization of Combined Dry and Steam Reforming Process in Fluidized Bed Membrane Reactors

• Autothermal Reforming of Methane over Nickel Catalysts Supported on Nanocrystalline MgAl2O4 with High Surface Area

• A comparison study : Which catalyst preparation method is better for light olefin production in Fischer Tropsch Synthesis?

• Kinetic modeling of CO hydrogenation over a bimetallic Co/Ni catalyst in fixed bed reactor

• Modeling of an Autothermal Catalytic Monolith Reformer to Obtain Hydrogen for Fuel Cells

• Experimental Study of Behavior of Solids in a Gas-Solid Fluidized Bed

• Removal of chromium (III) from aqueous solution by Linde Type A (LTA zeolite)

• Kinetics of adsorption of methyl violet (MV) from aqueous solutions by SBA-15 spherical particles

• Experimental Investigation of Thermal Catalytic Cracking over Nanotubes Catalysts

• Hydrogen Production Using Liquid Hydrocarbon Cracking through Pulsed DBD Plasma Reactor

• CO2 Reforming of Methane over Nickel Catalysts Supported on Nanocrystalline MgAl2O4 with High Surface Area

• A comparison of three selectivity models for Fe-catalyzed Fischer-Tropsch synthesis in slurry phase

• An industrial investigation into COx formation in p-Xylene oxidation reactor

• Fuel-cell grade hydrogen production by methanol steam reforming over promoted Cu/ZnO/Al2O3 catalysts

• Oxidative coupling of methane for the production of ethylene over (x%) K2WO4-Mn/SiO2 catalysts

• Synthesis, Characterization and Catalytic Performance of Silicoaluminophosphate Catalysts Prepared by DEA&Mor Mixed Template

• Effect of Ultrasonic Treatment on the Gel Formation of MnSAPO-34 Catalysts in MTO Process

• Kinetic and mechanistic studies of the water-gas shift reaction on Pt/CeO2-Al2O3 catalyst

• The Effect of Thermo-physical Properties of Catalyst on the Hot Spots Region in the Multi-Tube FBCR

• Determination of the kinetic parameters of methanol dehydration

• Effect of baria on γ-Al2O3 phase transition temperature and sintering

• Effect Of Support And Promoter Content on Characteristic Properties And Catalytic Activity Of Ni/Ce0.75Zr0.25O2-MgAl2O4 And Ni/Ce0.75Zr0.25O2- yCO2 alumina in methane reforming with co2

• Promotion Effect of Fe on Mo/Al2O3 Catalyst for the CAMERE Process

• A Comparative Study for Synthesis of SAPO-34 by Different Templates; TEAOH and Morpholine

• Experimental Investigation of Causes of Chimney Corrosion

• Kinetics of Fischer–Tropsch synthesis on alumina–supported cobalt

• Kinetics of CO hydrogenation over impregnated cobalt–alumina

• Effect of preparation method on Cu/ZnO/Al2O3/CeO2/ZrO2 nanocatalyst properties and performance for hydrogen production

• Reduction of Carbon dioxide Emission through a Novel Configuration of Methanol Synthesis Reactor

• Simulation of a Novel Combination of Fixed bed and Slurry Bubble Column Reactor Concept for Methanol Synthesis

• Optimization of reactive carbon dioxide removal in a lab scale spray dryer using response surface methodology

• Applying full factorial design to the optimization of H-ZSM-5 zeolite synthesis for methanol dehydration to dimethyl ether

• The Effect of Different Kinds of CaO Catalysts on Biodiesel Production from Soybean Oil

• Investigate the effect of CuO doped nano particle tiatania on photoreduction of Carbon dioxide

• Naphtha Cracking through Pulsed DBD Plasma Reactor

• Improvement of CO2 greenhouse gas decomposition on TiO2 photocatalyst using N-doping method

• Thermal Catalytic Cracking of Naphtha over CeO2 Supported on Multi Wall Carbon Nanotubes Coated with SiO2

• Synthesis of sulfated zirconia nanopowders for catalytic applications

• Comparing of the Performance of HZSM-5 and SAPO-34 in the catalytic cracking of naphtha to produce light olefins

• The effect of Ce and P loading on catalytic performance of HZSM-5 in thermal catalytic cracking of naphtha to light olefins

• Adjusting Temperature of Furnace and Converters in Sulfur Recovery Units (SRUs)

• Hydrogen Storage System to Maintain Continuity in Polymeric Productions

• Energetic-Exergetic Analysis and Exergy Loss Evaluation in Combined Heat and Power Systems in South Pars Gas Complex

• Integration of Refinery Hydrogen Network

• Energy Integration and Optimization in Oil Refineries of Iran

• Statistical modelling and optimization of dibenzothiophene (DBT) oxidation in deep desulfurization of diesel

• UsingTSWEETProcessSimulatorto OptimizationofSulfur,recovery unit

• Effect of Temperature on Methane Adsorption by Granular Activated Carbon

• Turbulence model inspection for hydrodynamics of naphtha catalytic reactors

• The optimum conditions for measuring liquid entrainment in tray distillation columns using Taguchi method

• Transesterification of vegetable oils using ultrasonic-assisted heterogeneous process: A response surface methodology-based modeling and interactions between variables

• Investigation of Corrosion Phenomenon in Boilers of Phase 1 of South Pars Gas Complex

• Optimization of Absorption chillers using different absorbent mixtures of Lithium Bromide

• Revamping of Stabilizer Unit of Shiraz Refinery Complex

• The Patent Analysis of the Light Naphtha Isomerization Technology

• The Industrial and Safety Considerations for DMDS Replacement with H2S in an Olefin Plant

• Exergy evaluation of gas separation process

• Generalized Disjunctive Programming for Optimum Distillation Column Sequence: a comparison with genetic algorithm and heuristic methods

• Optimization of water consumption network with regeneration reuse by Coupled Genetic Algorithm-LP Method

• Improving Energy Efficiency in Pulp and Paper Industry,Using a CCHP System

• Optimum Sequence of Non-Sharp Distillation Columns for Ternary Separation

• Metal and metal carbide producing by metal oxides reduction with methane containing gas

• Oxidative Coupling of Methane by High-Frequency Pulse Plasma

• Catalytic cracking of LPG over FeHZSM5

• Biosorption of Radium onto Brown Algae: Equilibrium and Kinetic Studies

• Effects of design and operating parameters on performance of microbial fuel cell: Experimental study

• Scale up of fed-batch production of rh-GCSF in E .coli

• Investigation the effects of pulp density on the uranium bioleaching in stirred tank reactor

• Modeling of Growth Kinetics for Ralstonia eutropha During Formaldehyde Biodegradation

• Enhancement of Power Generation with Improved Single Chamber Microbial Fuel Cell Configuration for Dairy Wastewater Treatment

• Study of mixing in Airlift bioreactor used in (bio) leaching process

• Enzymatic Conversion of Glucose to Fructose in a Bioreactor Pilot Plant Scale

• Physical properties correlations in biodiesel production from used soybean oil based on reaction time and temperature

• Study on Effective Parameters in Biodiesel Production from Canola Oil using Kissiris Immobilized Rhizopus Oryzae in Solvent- Free System

• Optimization of bioleaching of a vanadium containing slag using RSM

• Ethanol production from cheese whey in airlift bioreactor

• Optimization of cheese whey fermentation by response surface methodology

• pH Dependent Equilibrium Models for Biosorption of Pb(II) on Chemically Modified Brown Algae, Cystoseira indica

• Electricity Generation Using Dairy Waste Water in a Microbial Fuel Cell

• Temperature and pH Optimization for the growth of lactobacillus delbrueckii ssp bulcaricus on whey -based medium using response surface methodology

• Optimization of albumin crystallization in low scale

• Investigating the interactions of the chiral forms of Ibuprofen molecule with the lysozyme protein crystal

• Kinetic Study of n-Hexane Biodegradation by an Isolated Fungal Consortium from a Biofilter

• Sequential Anaerobic-Aerobic Biological Decolorization/Degradation of a Reactive Azo Dye Using Anaerobic and Activated Sludge Under Varying Salt Concentrations

• Use of Loofa-Immobilized Rhizopus Oryzae as a Whole-Cell Biocatalyst for Biodiesel Production: Batch and Packed-Bed Reactor Study

• Biological Treatment of Synthetic and Real Oilfield Produced Water of Varying Salinity Using an Isolated Halophilic Bacterial Consortium

• Performance of a novel hybrid membrane bioreactor: Effect of organic loading rate on respirometric activity

• Statistical Study on Lipase-Catalyzed Synthesis of Biodiesel from Castor Oil using Response Surface Methodology

• Reinforcing alginate beads by incorporating amine-functionalized silica nanoparticles for 3D cell culture applications

• Preparation, Characterization and Application of Fe3O4 Clusters@nSiO2@mSiO2 Nanocomposite Particles for Lipase Immobilization

• Transport of heavy oil through pipeline using a bio/chemical emulsifier mixture: A pilot-scale evaluation

• Oxidase enzymes extraction from iranian tea leaves and evaluation the influence of important parameters

• Immobilization of pectinase on Fe3O4 nanoparticles coated with Docusate sodium salt

• Evaluation of B. subtilis Growth and Surfactin Production using Elementary Mode Analysis

• Effect of temperature and pH on rhamnolipid production in solid-state cultivation using corn residues

• Effect of factors on forward extraction of endopolygalacturonase using reverse micelles

• Extraction of Erythromycin with Reverse Micelles: Effect of Salt, Surfactant, antibiotic Concentrations and pH

• Comparison of PHB production in submerged and solid-state cultivation

• Estimated time span of mixed cultures for up-flow microbial fuel cell by measuring of potential difference

• Biodiesel production by transesterification of soybean oil using BaO/γ-Al2O3 as a solid base catalyst :An optimization study

• Study on Various Pretreatment Techniques on Lipid Extraction from PTCC 6016 Microalgae Strain by Bligh and Dyer Method

• Computational Fluid Dynamics simulation of a single cell of shaken Microtiter plate for determination of Air/Water interface shape

• Effect of ultraviolet irradiation on growth of isolated native fungi and their ability for degradation of PAHs

• Experimental Investigation of A Novel Method of Microalgae Cultivation in A Bubble Column Photo-bioreactor

• Role of jarosite precipitation on copper bioleaching

• Study of immobilized and free Thiobacillus thioparus capability for detection of hydrogen sulfide

• The Treatment of Petroleum Refinery Wastewaters Using Membrane Sequencing Batch Reactors

• The Use of Response Surface Methodology for the Study of the Effect of Liquid Recirculation Rate on the Hydrogen Sulfide Removal Performance of a Biotrickling Filter Employing Immobilised Thiobacilluc thioparus

• Preparation of Hydroxyapatite/gentamicin nanostructure via in situ hybridization method and its SBF study

• Chitosan Immobilization onto Poly Acrylic Acid Grafted Silicone as Wound Dressing

• Mathematical modeling of biodegradable drug delivery systems

• SDS-Functionalization and its effects on dispersion of carbon nanotubes in hydroxyapatite matrix

• Computational fluid dynamics in a novel perfusion bioreactor in the presence of tissue engineering scaffold

• Improvement of operating conditions for preparation of gelatin electrospun fibers used in tissue engineering

• Effect of Vesicular Structure of 2-(Propylcarbamoyl) terphthalic Acid Isobutyl POSS on Surface Tension of a Solvent System

• Electrospinning of PLA for tissue engineering: Effect of operational parameters on fiber diameters

• Evaluation of biopolymers blend hydrogel as a biopaper for cell and organ printing application: an in vitro study

• Mineralization of surfactant functionalized multi-walled carbon nanotubes (MWCNTs) to prepare hydroxyapatite/MWCNTs nanocomposite

• Investigation the effect of organoclay on surface properties of polypropylene nanocomposites

• Preparation and Characterization of Polyaniline Nanocomposite using PVA and DHSNa as Surfactants in Aqueous Media

• Influence of SiO2 in TiO2 matrix on tribological properties of TiO2

• Comparison of the Photocatalytic activity of TiO2 with the TiO2:SiO2 thin film

• A CFD study on the convective heat transfer of Al2O3/Water nanofluids under laminar flow regime

• Preparation of Polyaniline/Rice Husk Nanocomposite for the Removal of Arsenic from aqueous solution in various pH

• The ability of conducting polypyrrole nanocomposite to removal of phosphate anion from water in comparison with natural adsorbent

• Synthesis of Conductive Polymer Nanocomposites Using Methanol as Solution

• Enhancement of Heat Duty in Heat Exchangers Using Nanofluids

• Single-Step Preparation of Magnetite Nanoparticles by Partial Reduction of Ferric Ion Under Hydrothermal Condition

• Nanofluids Heat Conduction Modeling Based on Nanolayer Thickness

• Preparing high purity nano-size Cr2O3

• Highly dispersed nanoparticles (TiO2 and Clay) - UP resins with enhanced mechanical properties

• Nanoscale Study of Water Adsorption in Nanostructured Adsorbents, Dipole Moment Effects

• Effect of Surfactant on Morphology of Polyaniline Nanocomposites prepared in Aqueous/non-aqueous Media

• Synthesise and characterization of biocompatible Hydroxyapatite/Chitosan nanocomposite for medical usage

• A new structure of multiwall carbon nanotube/Alumina nanohybrid with high toughness and surface area

• Control Release of Micro Nutrient from Nano-Composite Hybrid Hydrogel Based on Organo Modified Montmorillonite

• Effect of surfactant concentration on the characteristics of Polyaniline nanocomposite prepared in aqueous media

• Preparation of Polyaniline Nanocomposites using sodium dodecylbenzene sulfonate as stabilizer in presense of silver oxide (Ag2O) in aqueous/non-aqueous media

• Effect of Polyaniline on Catalytic Activity of Platinum Nanoparticles in Direct Methanol Fuel Cells

• Release of tetracycline hydrochloride from (methacrylamide–comethacrylic acid)/ montmorillonite nanocomposite hydrogels

• Numerical study of forced convective heat transfer of nanofluid inside a horizontal tube

• Morphology and Properties of PVC/Clay Nanocomposites with enhanced Tensile properties

• Synthesis of Mesoporous MgAl2O4 Spinel Nanopowder with High Surface Area

• Low temperature synthesis of nanocrystalline calcium aluminate compounds with surfactant-assisted precipitation method

• Synthesis of water soluble cadmium sulfide quantum dots and its intraction with aniline

• Equilibrium, kinetic and thermodynamic studies of hydrogen adsorption on multi-walled carbon nanotubes

• Optimization of synthesis conditions for brackish water ion elimination by TiO2 coated PVA/PES nanofiltration membranes using Taguchi approach

• Prediction of laminar forced convection of zirconia/water nanofluid in a vertical tube

• Synthesis of Vertically Aligned Carbon Nanotubes with Different Diameters in Porous Alumina Template via a Simple CVD Method

• Microwave-assisted Hydrothermal Synthesis of Nanosized SAPO-34 Molecular sieves

• Comparison different neural machine learning models for predicting of nano-size pharmaceuticals

• Activated Carbon Nanofiber Production for the Removal of Pollutants

• Organic/Inorganic Hybrid Polymer Nanocomposites based on Polycaprolactone Diacrylate/Polyhedral Oligomeric Silsesquioxane: Synthesis, Characterization and Double Bond Conversion Studies

• Fast Synthesis of Nano Crystal Zeolite NaY Without Using Organic Template

• Synthesis and characterization of polypyrrole/ DBSNA Nanocomposite in aqueous and aqueous/non-aqueous media

• Synthesis of Polypyrrole Nanocomposite Moddified With Titanium Dioxide Nanoparticels

• Experimental investigation of thermosyphon under electrical field using nano-fluid

• Synthesis of NaA zeolite nano crystals using tetramethylammonium hydroxide (TMAOH) organic cation

• A Survey on Diffusion Coefficient of Organic Liquids in Air Using Experimental Data to Estimate Mass Transfer Improvement in Nano Fluids

• Synthesis of nano-crystalline ZrO2 powder by the hydrothermal method

• Calculating the number of the Deposited Carbon Nanotubes in Dielectrophoretic Systems

• Synthesis of NaX and NaY zeolites nano crystals using organic cations

• Study of solvent effect on preparation of vanadium oxide nanostructur with hydrothermal process

• Exprimental evaluation of H2/CH4 mixture separation by multiwalled carbon nanotubes

• Preparation and mortality half-life determination of nano encapsulated essential oil of Artemisia husskenechtii Boiss. Against Tribolium castaneum

• Prediction of Thermal conductivity of nanofluids by molecular dynamic simulation

• Preparation of colloidal silver nanoparticles with antibacterial activity by a simple chemical reduction method

• Formation of nano-thin TiO2 layer on ceramic support and study the photocatalytic properties

• Effect of Porosity and Organocaly Level on the Ion-exchange Capacity of polyHIPE Membrane

• Molecular Simulation of the Structure of Methane Hydrate Using the Wolf Method

• Preparation and Characterization of Agarose-Nickel Powder Composite Particles Customized for Expanded Bed Application

• Effect of time and heat-treatment temperatures on the characterization of nano-crystallite Mn1.5Co1.5O4 prepared by citrate sol–gel method

• Experimental investigation of mass transfer coefficient of gas absorption in nanofluid in the presence of electric field

• Effect of Nanofluid on Mass Transfer Coefficient of CO2 in a Wetted Wall Column

• Effect of PEG molecular weight and coagulation temperature on amoxicillin separation by polysulfone nanofiltration membrane

• Control Banding: a qualitative tool for risk assessment and control of nanoparticle exposures

• Solvent system and affecting parameters ranges for uniform electro-centrifuge-spinning of polycaprolacton

• Sol-Gel Synthesis and characterization of nano iron oxide

• Preparation of Titanium Dioxide Nanoparticles with Different Carbon Coating Using Polyacrylamide Gel

• Fabrication of a Glassy Carbon Electrode Coated with Ni-Au Nanoparticles and Its Application on Electrolytic Oxidation of Methanol in Fuel Cells

• The rheological and thermal behavior of CuO in ethylene glycol -water nanofluids

• Modification of clay via silane grafting and nylon synthesis onto the montmorillonite

• Preperation and Characterization of CoS2 Nanoparticles

• Fabrication of Pharmaceutical Nano Particles Through RESS Process; Influence of Temperature, Pressure and Co-solvent

• Production of CoS2 nanoparticles

• Experimental Investigation of Overall Heat Transfer Coefficient in CuO/Water Nanofluids in the Compact Heat Exchanger

• Effect of phosphorous and impregnation method on Propylene selectivity from methanol over HZSM-5 nano catalysts

• Control the Size and Size Distribution of SAPO-34 Fine Particles by Variation of Agitation Method and the Type of Organic Templates

• Synthesis of nano-perfluorooctyl alumina (PFOAL) using nano forms of γ-Alumina and Boehmite as the supports

• Development of olive mill wastewater treatment by novel functionalized carbon nanotube/polyethersulfone ultrafiltration membrane

• Preparation of the modified ceramic nanocomposite supports at low sintering temperature

• Synthesis and characterization of nanostructure Pt/ZSM-5 for catalytic applications

• Comparasion of copolymerization and terpolymerization with (Ind)2ZrCl2 metallocene catalyst

• Synthesis, characterization and formation mechanism of nanosized β-tricalcium phosphate with plate-like structure

• Artificial Neural NetworkModeling of Guar Gum Apparent Viscosity

• Secondary nucliation in semibatch emulsion polymerization: effect of secondary feed component on particle size and their distribution

• Exfoliated Poly (Styrene-co-Methyl methacrylate) Nanocomposite via AGET ATRP in Miniemulsion

• Modification of polypyrrole nanostructure using silver oxide nanoparticles

• The Effects of Styrene-Butadiene-Styrene (SBS) Polymers on the Improvement of Mechanical Properties of Hot Mix Asphalt (HMA)

• Comparative Study of Asphalts Modified by SBS And LDPE (LD-LF0200)

• Study of Mechanical properties and Water Absorption behavior of Benzylated Wheat Straw Plasticized With Stearic acid

• The preparation and modification of polypyrrole/Cuo Nanocomposite using Poly(vinylalcohol) as a surfactant

• Effect of concentration of Poly(vinyl pyrrolidone) on Polyaniline/Polystyrene nanocomposite in aqueous media

• The Effect of PH and Surfactant on the Removal of Lead Cation Using Polyaniline

• Effect of Surface Modification of Nanosilica on the Mechanichal Properties of Unsaturated Polyester (UP)/Silica Nanocomposites

• Study on thermal property of Polyurethane-Urea elastomers prepared with different dianiline chain extenders

• Investigation of TiO2 Pigment Dispersion in ABS Matrix Using Rheological Parameters

• New Polyolefin Materials With Metallocene Catalysts

• Numerical Study of Polymer Composite Lap Joints with Different Configurations

• Effect of Two Different Series of Nanoclays on the Thermal and Mechanical Properties of Thermoplastic Polyurethane-clay Nanocomposites

• Investigation of pH-Induced Changes in a Methacrylate Terpolymer Chain Conformation Using Dilute Solution Viscometry

• Effect of sulfonation degree on the chemical and thermal stability of sulfonated polyether ether ketone (sPEEK) membranes for fuel cell applications

• Synthesis and characterization of new Pt nanocatalysts based on the cesium salt of 12-tungstophosphoric acid as an additive for preparation of self-humidifying nanocomposite membranes in PEM fuel cells

• Synthesis and investigation of Polyaniline nanocomposite Modified With Ag2O Nanoparticles

• Synthesis of a Novel Interpenetrating Polymer Network Hydrogel as Drug Delivery System

• The Effect of MWCNT on the Mechanical and Electrical Properties of HDPE/MWCNT Nanocomposite

• Strengthening and Modification of Polypropylene by Utilizing Talc & Calcium Carbonate

• Investigation of Phase Separation in Cyanoacrylate-POSS Nanocomposites

• Experimental investigation of sulfonated poly(ether ether ketone)ionomer in the catalyst layer of proton exchange membrane fuel cell (PEMFC)

• Synthesis and Characterization of Acrylamide-based Anionic Copolymer and Investigation on Its Properties for Enhanced Oil Recovery

• Viscometric Investigation of Chain Conformation and Crosslinking of Dextran in Dilue Aqueous Solutions

• The use of thermal analysis techniques for gas permeation study of a polymeric membrane

• Investigating the In situ Free Radical Polymerization Kinetics of PS in the Prescence of Silica Nanoparticles

• Highly Open Porous Emulsion‒Templated Monoliths: Effect of Electrolyte and Organoclay

• Preparation of Carboxymethyl Chitosan Nanospheres via its Crosslinking of in an Inverse Microemulsion System as Carrier for Amphotericin B Delivery

• Purification of Carboxymethyl Chitosan and Investigation of its properties

• Fabrication of Crosslinked Dextran Microspheres: Screening of Effective Parameters by Plackett-Burman Design-of-Experiments

• Microencapsulation of n-Hexadecane as a Phase Change Material via In-situ Dispersion Polymerization: Effect of pH and Addition Rate of MF

• Modeling the Emulsion Polymerization in the Presence of coagulation:Monodisperse versus Polydisperse Particle Size simulation

• Effect of Multi acrylate Crosslinkers on Rheological Properties of Poly Acrylate Microgels

• Investigation of Multi Functional Crosslinkers on Poly(acrylic acid) Microgels Prepared via Precipitation polymerization

• Studied Semi-batch and batch wise Effect on Characterization of Poly(acrylic acid) Containing long-ChainA crosslinker

• Preparation and Properties of Collagen-g-poly(Acrylic acid)/Nanomontmorillonite Superabsorbent Composites

• Synthesis and swelling behavior of superabsorbent composite hydrogels in present of nanoclay (Na-montmorillonite)

• Effect of Carbon Black Loading of Various types on Rheological behavior and Electrical Conductivity of Low Density Polyethylene

• Effect of temperature and ultrasound power on the ultrasonic degradation of poly (acrylic acid)

• Simultaneous determination of Irganox 1010& Irgafos 168 in Polyethylene

• Reheological Properties of crosslinked Poly Acrylate in Semi-batch Precipitation Polymerization

• Simulation of Dissolution Process of Hydrophobic Coated Core- Shell Particles at Interface of Two Immiscible Fluids

• Effect of Sonication on Efficiency of Silane-modified Silica in Rubber Compounds

• The Evaluation of Psedue-Semi Interpenetrating Polyurethane network From FTIR and Swelling Test data based on polybutadiene-ol/polypropyleneoxide mixture

• Planning a Road Map for Achieving PBT Production Know-how as an Alternative to PET in STPC Complex

• Study on Polyurethane Elastomeric network based on polybutadiene-ol/polypropyleneoxide mixture: The Structure-Mechanical and Thermal Properties relationship

• Molecular Stress Function (MSF) Theory: Development a New Strain Energy Function

• A Comparative Study of Reservoir Average Pressure Calculation,Using Flowing Pressure Data andWell test Analysis, in one of the Southwest Iranian Carbonate Fractured Oil Reservoir

• Production and Injection Management in one of Iranian Oil Reservoirs using the concept of Stream line

• Estimation of effective porosity using Ensemble Combination

• Prediction of Condensate Gas Ratio (CGR) Using an Artificial Neural Network (ANN)

• A Mathematical Model for Prediction of Gas Diffusivity in Reservoir Oil With Considering Swelling Effect

• Experimental Investigation of Secondary Oil Recovery in Fractured Media

• Estimating Original Hydrcarbor In Place using Neural Network

• Application of Artificial Neural Network for Prediction of Lost Circulation

• Lessons learned from Production Logging Interpretation of a well in a Gas Condensate Reservoir

• Drilling and Completion Challenges in Gas Wells of Iranian Southern Gas Condensate Reservoirs

• Application of TDS Technique in the Well Testing of Twophase,Oil and Water Naturally Fractured Reservoirs with Unsteady State Flow Regime

• Prediction of Minimum Miscibility Pressure for Carbon Capture and Sequestration and Acid Gas Disposal Applications

• Simulation and Study of Various Water Alternating Gas Injection Methods in One of the Fractured Reservoirs in the West of Iran

• A New Method for Calculation of Perforation Skin

• Sensitivity analysis on polymer Solution theory modeling parameters of asphaltene precipitation

• Experimental study of Iron-Control Chemicals for High Temperature Sour Gas Wells

• The Study of Calcium Sulfate Scale Tendency during Water Injection in Iranian Oilfields at Different Temperatures

• A Geostatistical Study of Rock Permeability in a Multi-Layer Carbonate Oil Reservoir

• Effect of Compositional Grading on Reservoir Fluid Characterization in Fractured and Conventional Reservoirs

• Predicting Asphaltene Precipitation Using Modified Flory-Huggins Theory; Case Study of an Iranian Oil Reservoir

• Investigation of Revaporization of Retrograde Condensate in a PVT Cell

• Investigation of Revaporization of Retrograde Condensate in a Synthetic model

• Non –Hydrocarbon gases as Cushion Gas for Natural Gas Storage

• Flowing Material Balance Equations for Waterdrive Oil Reservoirs

• Improvement of Hydrate Production and Storage Condition to be Used for Natural Gas Storage and Transportation

• Preformed Particle Gel: Effects of Calcium Chloride and pH on Equilibrium Swelling Ratio by Using Response Surface Methodology

• Disproportional Permeability Reduction behavior of Hydrogels

• Simulation of Microbial Enhanced Oil Recovery by Using of Neural Networks

• Compositional Simulation of Gas Condensate Reservoirs with Optimal Hyper-Components Using Gustafson Kessel Method

• Production Optimization in Horizontal and Deviated Wells of Haftkel Oil Field

• Effect of additives on the antiknock properties and Reid vapor pressure of gasoline

• Production Potential of Coalbed Methane (CBM) in IRAN

• Study of Hexamethylenetetramine on Polymer Gels Used in Water Shutoff Treatment by Central Composite Design

• Investigation of Asphaltene Precipitation due to Gas Injection: Experimental and modeling

• Effect of the Residence Time and Temperature on Asphaltene Deposition during CO2 gas Injection at Static Conditions

• Investigation of Formation Damage and Well Injectivity by Injection History during Water Injection Process

• Study of the effective parameters in synthesis of the nanostructured scaling inhibitors applicable in oil fields using sea water injection process

• Experimental Investigation of Impact of Heterogeneities in Performance of ASP Flooding to Heavy Oil in Five Spot Systems

• Core Scale Numerical Modeling of Surfactant Flooding for Enhanced Oil Recovery from Oil Reservoirs

• Hydraulic Fracturing Design and Optimization in One of the Iranian South Oil Reservoirs

• The Effect of Process Variable on the Gelation Time of Sulfounated Polyacrylamide Gel

• Experimental Investigation of Permeability Reduction by Asphaltene Deposition in Porous Media

• Experimental Investigation of Polymer Flooding in Fractured Heavy Oil Reservoirs Using Micromodel Systems

• An Experimental Approach For Evaluation of Wettability Alteration by Nanoparticles During Water Flooding to Heavy Oils

• Artificial Neural Network Based Model for Crude Oil Viscosity Prediction

• Storage of carbon dioxide in an oil reservoir for reduction of greenhouse gas emissions

• Experimental and Modeling Study of two phase gas/oil relative permeability at near miscible condition

• Prevention and Removal of Gas Hydrates in Pipelines Using Ultrasonic Waves

• The effect of chemical properties of different Iranian crudes on the bitumen producing process

• A New Technique in Reducing the Numerical Dispersion During Miscible Displacement Process

• An Improvement on Gilbert Type Choke Performance Relationship for Iranian Gas Condensate Reservoirs

• Wettability alteration of carbonate rocks during surfactant flooding

• Experimental investigation and Thermodynamic Modeling of Phase Behavior of reservoir fluid

• Performance Study of a Gas/Condensate Reservoir: Data Uncertainties and Sensitivity Studies

• Prediction of the MMP by Using of Artificial Intelligence

• Well Placement Optimization by Infill Drilling Using Streamline Simulation in an Iranian Oil Reservoir

• Smart wells optimization with history matching

• A Laboratory Study of Oil Recovery by Nitrogen WAG injection in Berea Sandstone Rock

• Experimental investigation of free and forced gravity drainage in petroleum fractured reservoirs

• Investigation of Degelling Process of Polymer Gels using Central Composie Design

• Effect of Some Kinetic Inhibitors on Hydrogen Sulfide Hydrate Induction Time

• Evaluation of breakthrough and post breakthrough behavior using percolation theory at early stage of reservoir life

• Control of undesired polymerization of styrene monomer during purification

• Study the Effective Parameters of Chemical Flooding on Enhanced Oil Recovery

• Effect of Si/Al ratios on the activity of H-ZSM-5 modified catalysts in the catalytic oxidation of Ethyl acetate

• A New Corrosion Inhibitor for Acidization of Oil wells

• Separators Pressure Optimization in Multistage Production Units by Genetic Algorithm

• Oil Resrvoirs Characterization by Parametric Models

• Experimental investigation of Block to Block interaction and capillary continuity in petroleum fractured reservoirs by using glass etched micromodels

• Injection and Production Profile Modification in Waterflooding of Oil Reservoirs Utilizing Viscous Invert W/O Emulsion Pre-Flush

• Investigation of Hydrocarbon & Non-hydrocarbon (CO2, N2) Gas Injection on Enhanced Oil Recovery in One of the Iranian Oil Fields

• Experimental Investigation of Possible Scale Formations during Water Injection Process with an Emphasis on the Role of Reservoir Rock

• Application of GK Fuzzy Clustering Method for PVT Analysis of Gas Condensate Reservoirs

• Pr diction of Mineral Scale Formation in Iranian Offshor oil Field under Water Flooding

• Experimental Study on the Operational Factors that Affect the Oil Content of the Wax during Dewaxing Process by Adopting DOE Method

• CO2 Diffusion in the Matrix Block of Fractured Reservoirs; an Experimental Study

• An Investigation on the Probability of Enhance Oil Recovery by Using Magnetic Water Flooding in an Heavy Oil Reservoir

• Neural network prospect in reservoir characterization

• Neural network use ability in Well Log Data Analysis

• Use of NMR spectroscopy for structural characterization of off-shore Persian Gulf heavy oil asphaltenes

• Investigation of structural characteristics of different asphaltene deposits after surface wetting at high presssure

• Different surface precipitation scenarios in Iranian cude oils

• Study of Compatibility of Alkaline Injection with Formation in Alkaline Injection Project in Haftkell Field

• CO2 Emission Reduction in South Pars Field an Innovative CCS-EOR Opportunity in Iran

• Prediction of the MMP of gases using neural networks

• Evaluation of a commercial inhibitor effect on asphaltene size distribution:theoretical and experimental study

• Experimental Study of the Asphaltene Aggregates Size Due to CO2 Gas Injection under Static Conditions

• EFFECT OF HYDRODYNAMIC FORCES ON OFFSHORE PIPELINES

• Degradation of textile dyes by electron beam radiation in the presence of ozone

• Influence of Magnesium on Radium Removal by Barium Chloride in Aqueous Solution

• Prediction of Droplet size in a Rectangular Venturi Scrubber based on Eulerian/Lagrangian Method

• Removal of Lead and Copper from Aqueous Solution by grinded Eucalyptus stem

• Hydrogen Management to Minimize CO2 Emissions in Bandar Abbas Refinery

• Removal of Cr+6 metal ions from industrial wastewater using synthesized coal fly ash

• Kinetic and equilibrium studies on the adsorption of Pb(II) onto functionalized poly(vinyl alcohol)/silica composite membrane with mercapto groups

• Adsorption of Lead from aqueous solutions using natural diatomite

• Hydrogen distribution network optimization with application of membrane

• Effects of Temperature and Organic Loading Rates on the Biogas Yield of MSW Anaerobic Digester

• semi-continuous anaerobic co-digestion of poultry manure and wheat straw:effect of loading

• Nickel sorption from aqueous solution by conducting polypyrrole

• Arsenite Adsorption from Aqueous Solutions by Polyaniline/Polyvinyl Alcohol Composite

• Synthesis of polyaniline nanocomposite for the removal of Fe(II)

• Simulation of Solar Radiation Effects on Pollution Dispersion of a Street Canyon Aiming to Improve Urban Design and Climate

• Kinetics of Trihalomethane adsorption from drinking water using Granular Activated Carbon

• Low-temperature SCR of NOx with NH3 over manganese oxides supported on multiwalled carbon nanotubes

• Synthesis and Characterization of Calcium and sodium Containing Acrylamide-based Polymer and its Effect on Soil Strength

• Application of Composite Hydrogel of Clinoptilolite crosslinked wheat Straw-g-Potassium Acrylate to Dye Sorption

• Laboratory study of sulfate ions reduction from an industrial wastewater by nanofiltration process

• Biological Treatment of wastewater contaminated with polycyclic aromatic hydrocarbon (PAHs) in continuous biofilm reactor

• Adsorption of Ni(II) ions using modified walnut shell: Factorial design analysis

• Degradation of Crystal Violet in aqueous solution by advance Fenton process assisted by modified zeolite

• Influence of Adsorption on Micropollutant Removal by Ozonation Catalyzed by Alumina

• Effect of Preparation Method on Activity and Physico-Chemical Properties of Zinc Chromite Nano Spinels in VOC Oxidation

• The Estimation of Nitrate Breakthrough Curve Using Analytical and Numerical Solutions: A Comparison

• Optimization of Manganese ion Removal from Wastewater by Electrocoagulation Process

• Double step biodiesel production from waste frying oil and evaluation as diesel fuel

• Photocatalytic inactivation of Escherichia coli using a system of TiO2 and UV irradiation

• Effect of Carbon Nanotube Coating Electrode on The Performance of Microbial Fuel Cells (MFCs)

• Separation of meta xylene from industrial wastewater by electrical field

• Empirical Modelling of degradation of acid blue dye by peroxodisulfate

• Application of solar light to removal of ammonia from petrochemical wastewater by nano particles TiO2/Leca photocatalyst

• Distribution of Air Pollutants in South Pars Gas Complex Using Computational Fluid Dynamics

• The Decolorization of Acid Dye by Ozone in Airlift Reactor

• Properties and Activities of Nanostructure LaBO3 (B=Co, Mn) Perovskites in Removal of Toluene from Polluted Air

• Transport processes in the adsorption of Trihalomethanes from drinking water by Granular Activated Carbon.

• Lead removal from aqueous solutions by use of new low-cost adsorbent

• Proximate Analysis of Green Algae

• Biofiltration of Hexane Vapor Under Intermittent Loading: Effect of Operating Temperature and Kinetic Analysis

• Mathematical Model Development for Biofiltration of Hexane at Different Working Temperatures

• Equilibrium, kinetics, and Thermodynamic Studies for the Adsorption of Anionic Dyes onto Surfactant Modified Feldspar

• Comparative Evaluation of Numerical and Gaussian Models for Gas Pollutants Dispersion from Industrial Flares

• Aerosols Filtering by PolyTetra Fluoro Ethylene Membrane Technology

• Estimation of Emission Factors for Sour Gas Flares

• Prediction of CO Distribution in Zand Tunnel of Shiraz Using Computational Fluid Dynamics (CFD) Model

• Diesel engine emission improvements using DGM-Diesel fuel blend

• Electrochemical Analysis of Shewanella sp. Behavior In Microbial Fuel Cells

• Computational and Experimental Study of Effects of Some Parameters on the Ventilation System of Zand Tunnel of Shiraz

• Effective factors in treatment of phenolic wastewater by Alcaligenes faecalis

• Physically activated carbon production from pistachio shell, Influence of operating conditions on surface area development

• Development of Novel Photocatalysts for Photochemical Removal of Volatile Organic Compounds Based on Spinel Metal Oxide Photocatalysts (XCr2O4) and Effect of Different Metals(X=Fe, Cu, Zn) on Catalytic Activities of It

• Effect of Different Supports on Catalytic Activities of NanostructureZnCr2O4 as a Novel Photocatalyst for Photochemical Removal of Volatile Organic Compounds(VOCs)

• Impacts of Flocculant Addition on the Performance of Membrane Bioreactors

• Growth Kinetic Survey in Biodesulfurization of Natural Gas

• Optimization and modeling using a response surface methodology (RSM) based on the central composite design of azo dye with immobilized titania nanoparticles

• Simultaneous removal of Ca and Mg Salts using chemical precipitation with lime

• Development of a new Poly Silicate Ferric coagulant and its application to coagulation-membrane filtration hybrid system in waste water treatment

• Modified Perfluorinated Alumina with High Adsorption Capacity for Removal of Organic Pollutants from Water

• Characterization and Demulsification of Crude Oil in Water Emulsion

• Formation of Aerobic Granules Using Industrial wastewater

• Minimizing the Total Cost of Energy Production by Choosing the Best Energy Conversion Technologies for a Case Study in Iran

• Catalytical reduction of NOx over granular active carbon nanocatalysts impregnated with copper oxide

• Modeling and Comparison of Cyanides Elimination from Wastewater of an Industrial Unit by Chemical Treatment and Physical Absorption Methods

• Application of nano-perfluorooctyl alumina (PFOAL) adsorbents for Adsorption of Methyl tert-butyl Ether from aqueous medium

• The Comparision of Coprinus cinereus Peroxidase Enzyme and TiO2 Catalyst for Removing Phenol

• Modeling of Biofiltration process for VC Removal from an Air Stream and Optimization of Model Parameters by Genetic Algorithm

• Photocatalytic Mineralization of MAPO with Nano Titania Particles and the Process Optimum Conditions

• Advanced Oxidation Process Integration and Intensification

• Comparative study on chromium (VI) removal by dead and living fungal biomass of Aspergillus niger sp.

• Optimization of zinc adsorption by polyaniline using experimental design

• Study of Lifetime and Selectivity Behaviour of Nanostructure Alumina-Supported CrOx Catalyst during O-VOCs Oxidative Removing from the Polluted Air

• Laboratory investigation of smart self-healing coatings based on micro/nanocapsules and optimization of them for inhibition of heavy metals emission to the environment

• CO2 Emission Reduction by Carbon Capture and Storage into Subsurface Reservoirs in Iran

• Simultaneous pool fires Modeling Using Fire Dynamic Simulator (FDS)

• Assessment and management of Safety, health and environmental risks lime kiln of agro-industry farabi company with Delphi &Topsis consolidated model

• Experimental study of ferrous iron removal from water by aeration in an airlift reactor

• Author’s Guide for Preparation of English Paper for The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011) Modeling of Ammonia Dispersion from Storage Tanks in a Petrochemical Complex

• Application of the central composite design and response surface methodology to enzymatic Extraction of oil from Pistacia khinjuk seeds by protease

• Aqueous enzymatic extraction of pistacia oil

• Comparison of T and W zeolite membranes for separation of O2/SF6 mixtures

• Enzymatic Treatment as a method to improve the extraction efficiency of soybean oil

• Effect of temperature and modified atmosphere on drying kinetics and color of dried golden apple

• Effect of modified atmosphere packaging on bread staling

• Modeling of microwave heating of mashed potato with temperature dependent thermal and dielectric properties

• Mechanical and antimicrobial properties of corn starch-carboxymethyl cellulose films incorporated with Zataria multiflora and Rosmarinus officinalis

• Investigation of the effect of ultrasound on ascorbic acid of fresh orange juice

• β-cyclodextrin acting as an emulsifier for formation of emulsion using lactic acid producing bacteria

• Gas Purification from Isopropyl Mercaptan by Catalytic Oxidation Process overWO3 Supported Multiwall Carbon Nanotubes

• Influence of alcohol addition on gas hold-up, liquid circulation velocity and mass transfer coefficient in a Packed Bed Split- Cylinder airlift bioreactor

• Synthesis and characterization of W-type zeolite membrane:effect of synthesis temprature

• Introduction of New Cell of Graphite –Mg with HCl –KMnO4 Electrolyte and Analyzing Effective Experimental Factors on the Cell

• Effects of Synthesis Parameters on Mullite Microfiltration Membranes: Structure and Performance

• Oxidative desulfurizing of crude oil via power ultrasound and modeling using response surface methodology

• Mathematical Method for Generating a lot of Virtual Data from Limited Number of Real Data in Industrial Plants

• Experimental Measurement of Overall Heat Transfer Coefficient in the Automobile Radiator under Laminar Flow

• Preparation of TiO2-pillared montmorillonite; degradation of methylene blue by photocatalyst

• Effect of binder concentration on structure and size distribution of Alumina granules fabricated by high shear mixer Granulator

• Fabrication of Mesoporous Silica using Triblock Copolymer as Template

• A Mathematical Model for Prediction of Breakthrough Behavior of CO2-CH4 Dynamic Adsorption in the Bed of Core-shell Zeolitic Adsorbent

• Enhancement of hydraulic activity of Portland cement-slag paste by non-chlorine chemical activators and quality improvers

• Activation of phosphorous slag by chemical activators and quality improvers

• Improvement of Mechanical and Chemical Properties of Epoxy Coating forNatural Gas Pipeline by SiAlON Nanopowders

• Enhancement of cementing properties of fly ash-Portland cement blend with chemical activators and quality improvers

• Comparing the effects of various grinding aids in vibrating disk and ball mills

• Investigating the effects of triethanolamine on clinker grindability with and without gypsum

• Effect of mechanical activation on compressive strength of activated phosphorous slag

• Effect of curing conditions on compressive strength of activated phosphorous slag

• Effect of Combination of Talc-Nepheline syenite on Thermal and Mechanical Properties of Ceramic Raschig Ring

• optimal estimation of PSD for MOF materials VIA LOOCV

• Modified bitumen with crumb rubber and calcium carbonate

• The Effect of Different Sources of CaO Catalysts on Biodiesel Production from Soybean Oil

• Nanoporous silica aerogels as adsorbent to remove para xylene vapors from waste gas streams

• Adsorption of phenol with silica aerogel-carbon active nanocomposites

• Potential assessment of silica aerogels nanosuspensions for wettability alteration

• Optimization of synthesis parameters for cost effective production of hydrophobic silica aerogels

• Study of Decentralized Robust Nonlinear Fault Diagnosis for an Interconnected Four-Tank Process

• Application of Generalized Predictive Control to an Oscillatory Bioreactor

• Blood Glucose Regulation for Patients withType-1 Diabetes Using Model Predictive Control

• Reconfigurable Tracking Controller for a Four-Tank System Benchmark via Eigenstructure Assignment

• Comparison of Non - adaptive and Adaptive Nonlinear Model Predictive Control of Depth of Anesthesia

• An Offline Control Strategy for Regulation of Blood Glucose Level in Patient with Type I Diabetes

• Dynamic Simulation and Control of Vapor Recompression Column

• Comparison of Different Loop Pairing Criterions for Multiloop Control

• Comparison of Various PI/PID Controller Design Methods for Interacting Multiloop Systems