Third Persian Gulf Oil, Gas and Petrochemical Conference, دی ماه ۱۳۹۹

Accepted papers in Third Persian Gulf Oil, Gas and Petrochemical Conference

• Performance of a Pilot-Scale Vermifilter for Domestic Wastewater Treatment

• Stability analysis of vertical well wall using numerical modeling in one of Iran's oil wells

• A Reservoir Characterization and Potentiality of Economic Viability: A Case Study of K-Creek Oil Field in Niger Delta.

• A Review of Methods of Completing Wells and Investigating Case Studies in Qatar, Indonesia and Iran with A Systematic Approach

• An Incremental-Analytical Solution for Variable-Coefficient Advection-Diffusion Equations in Simulating River Flow

• Toward mechanistic understanding the effect of an external MF on the HCl solutions: Experimental study and modelling using RSM

• Experimental Study of Biochemical EOR in Oil-wet Fractured Carbonate Reservoirs

• The feasibility based conceptual decision-making approach for carbon capture and storage (CCS) technologies in green technology management

• Experimental study on the influence of an induced magnetic field on corrosion behavior of drilling casing of oil and gas wells in aqueous HCl solution

• Occupational risk assessment at the time of construction of a petrochemical unit by JSA method, case study: Abadan Petrochemical

• Thermodynamic Modeling of H۲S Solubility in [BMIM][PF۶] Using SL, SRK and NB Equations of State

• ارزیابی مسئولیت پذیری اجتماعی شرکت های نفتی مستقر در شهرستان عسلویه (رویکرد زیست محیطی)

• Stretching Poly (lactic acid) extruded films at different drawing speeds and temperatures

• Catalytic Tri-reforming of Methane Using Flue Gas from energy intensive processes for synthesis gas production

• Evaluation of volatile organic compounds released from wastewater treatment plants of oil refineries Using emission factor

• Geochemical characteristics of Bangestan Reservoir in one of the S.W. Iranian Oilfield

• A Brief Review of Reverse Osmosis Membranes: Materials, Properties and Performance

• Dendritic polymer immobilized on nanosilica: An effective and recyclable adsorbent for the removal of copper ions from aqueous system

• Mathematical Modeling of Counter-Current Spontaneous Imbibition in a Single Block

• Methanol production from Glucose fermentation plant as feed stream

• Evaluating the Effects of New Natural Surfactants on the Wettability Alteration of Carbonate Rocks and Water/Air Surface Tension Reduction

• Assessing the effect of crushing on the X-ray diffraction pattern of the asphaltene sample

• Synthesis of Superhydrophobic, Hierarchical Teflon Coating and its Applications: Reduction of Organic and Inorganic Scales, Prevention of Corrosion

• Energy audit and process simulation of a gas refinery stabilization unit

• Two-dimensional mathematical modeling of a new generation of industrial ammonia synthesis reactor

• Discharge of dense effluents containing suspended solids: A CFD analysis

• Experimental investigation and prediction of pour point using artificial intelligence

• Combination of electrocoagulation and electrooxidation for produced water treatment

• review of low salt water injection in carbonate reservoirs to increase oil harvest

• Prediction of LLE Data of the Mixture (Hexane+Benzene+Tetrahexylammonium bromide:ethylene glycol) Using COSMO-SAC Model

• The effect of blending Polycarbonate with Polyvinylchloride on the membrane surface porosity and pore size

• Flare radiation and dispersion consequence modeling; case study Ahvaz oneظoperational area flare

• An experimental study on the performance of porous PES and PC hollow fiber membranes on air humidification process

• Prediction of Conductivity Coefficient for Fluorocarbon Refrigerants R۱۱, R۲۲ and R۳۲ by Cubic Equations

• An Investigation of Various Salts and pH's Effect on Fine Migration in Sandstone Reservoirs

• The Mitigation of Formation Damage in Seawater Flooding by Scale Inhibitors

• Estimate of Thermal Conductivity Coefficient for CFCs by use of cubic equations(TKP Model)

• Simulation and modeling of nitrate extraction in membrane contactors using COMSOL and MATLAB

• Life cycle assessment (LCA) of phase change materials (PCMs): A mini-review on building applications

• CFD simulation of top-fired steam methane reforming furnace

• Investigation of Gas-Cap Effects on Pressure- Transient Response in Naturally Fractured Reservoirs

• Simulation and economic study of biodiesel production process with supercritical methanol in different ratios of methanol to oil

• Improving the Resiliency of Crude Oil Production through Providing Mobile Oil Treater (MOT) at Oil Fields

• Modelling of heat and mass transfer in DCMD: Study of membrane parameters

• Application of ion exchange resins to reduce hardness, corrosion and scaling of drinking water

• Cubic ordered mesoporous Alumina supported Nickel catalysts in DRM reaction: effect of calcination temperature

• Simulation Investigation of Spontaneous Water Imbibition in a Matrix-Fracture System

• Simulation Investigation and Interpretation of Carbonated Water Injection in a Single Matrix Block

• Hydrogen produced in a multi-fuel process by methanol, dimethyl ether with catalyst CuO/CeO۲

• Application of ceramic microfiltration membrane in separation of greywater

• Experimental Reduction of Condensate Trapping by CaCO۳ Nanofluid Injection in Sandpacks

• Study of Methods for Remediation of Heavy Metal Contaminated Soil Media Using Analytical Hierarchy Process

• Fuzzy AHP-Based Decision Making for Prioritizing PET Chemical Recycling Methods

• Investigation of drilling mud based on bentonite, Using sepiolite nanoparticles in it

• XC Polymers in Drilling Mud

• Estimation of energy demand in Bushehr province in the household sector using LEAP model

• Effects of cast extrusion line speed on the crystallinity of LLDPE stretch films

• Experimental Study of the Effects of Surfactants on Precipitation and Deposition of Asphaltene in Pipelines

• Incentives for Combined Photovoltaic and Battery Storage System in Industrial Scale

• Simulation of Stress And Strain Changes in Rock Fissured Matrix by Poroelastic Model and Calculating Porosity and Permeability Reductions by COMSOL Software

• Modification of the Natural Gas Dehydration Unit to Reduce BTEX Emission

• Experimental evaluation of improvement of water base drilling fluid's rheological properties on formation damage

• Determination of rock type using Winland and SMLP methods and combining it with petrophysical analysis of well logging Bangestan reservoir in Shadegan oil field.

• An overview of Plasma Application for Improved Oil Recovery (Faculty of Petroleum and Natural Gas Engineering, Sahand University of Technology, Tabriz, Iran)

• Assessment of Different Factor on Remediation of TPHs Contaminated Soil

• Establishment of integrity management system of oil and gas transmission pipelines with environmental risk assessment approach based on API ۱۱۶۰ and ASME B۳۱.۸s standards

• Optimization of wax inhibitor in one of Iranian oil fields

• Impact of Anisotropic Permeability on Oil Recovery Using SP Flooding: A Simulation Approach

• An Investigation Into the Effect of Fracture Opening on Empirical Foam Parameters

• A CFD Analysis on Proppant Transport in Fracture for Foam-Based Fracturing Fluid

• The deterioration of oil prices and its causes

• A Thermoswitchable, Hydrophobically-Crosslinked Hydrogel as an Injectable Underwater Adhesive

• Ternary Blend Nanocomposites with Two Types of Organoclays: A Study on Morphological Properties

• EXPERIMENTAL STUDY ON MEMBRANE EFFICIENCY OF SHALES THROUGH PORE PRESSURE TRANSMISSION MEASUREMENTS.

• Experimental Study of Water alternating- CO۲ Coreflooding Performance as Enhanced Oil Recovery

• Comparison between Axial-Radial plate reactor and shell and tubes reactor for methanol synthesis

• Implications of Crude Oil Price change on Managing Human Resource in Oil and Gas Organizations: A Focus Group Study

• Fabrication and characterization of co-electrospun polycaprolactone/chitosan nanofibrous mats

• Fabrication of platinum nanoparticles by fiber laser ablation in water

• Predicting the carbon dioxide hydrate formation temperatures in the presence of amino acids

• Evaluating the Effect of Impurities on the Diffusion Coefficient of CO۲ by Molecular Dynamics Simulation: Application to CO۲ Sequestration Process

• Thermodynamic modeling of methane hydrate stability conditions in the presence of alkanolamine aqueous solutions

• Ultrasonic-Assisted Solvent Extraction of Lipids from Microalgae

• A Deep Learning Approach for Prediction of Dead Oil Viscosity

• Fuel production form polypropylene through thermal pyrolysis process

• Comparsion of thermal and catalytic pyrolysis for conversion of plastic to fuel

• Petroleum Geology, oil pollution, and human health: Review of case studies in Bushehr province

• Modeling of water fluid behavior and changes in velocity, concentration and pressure in symmetric microchannels by COMSOL software

• Evaluation of the properties polyether block amide / polyethersolfon membranes, including Magnesium oxide nanoparticles for separation CO۲ and CH۴

• Experimental Investigation of Immiscible Injection of CO۲ in the Sandstone Sand-packs

• A review of technologies for the control of biological pollutants in the environment

• Investigation of parameters affecting zeta potential

• Computational Fluid Dynamics (CFD) Analysis of Flow Characteristics of Heavy Crude Oil-in-Water Emulsion through Pipelines

• Experimental Investigation of Ni+۲ Ion Sorption from Synthtic Wastewater by MOF MIL-۵۳(Cr) in a Fixed-bed Adsorption Column

• Optimization and recycling of wastewater in the cooling tower of Bidboland Gas Refining Company

• Role of Carbon Nanotubes on the Rheological and Thermal Properties of Polyethylene/Carbon Fiber Composites

• Investigation of the effect of gas relief forces management in the face of crisis (natural disasters, floods and earthquakes) on the performance of gas supply system elements

• Hydrodynamic Optimization of Membrane Bioreactors Using Baffles with Different Geometries by Computational Fluid Dynamics

• Severe Wellbore Instability in Gachsaran Formation Necessitating Casing While Drilling and Continuous Circulation System

• Network Debottlenecking and Flow Assurance Optimization for an Offshore Field in Sout east Asia

• Spectral conversion of light using Rhodamine ۶G for enhancing the nitrate removal rate of green microalgae Chlorella sp.

• SAFT-γ Equation of State to Model the High-Pressure Densities of Imidozalium-Based Ionic Liquids with Cyano-Functionalized Anions

• Ethanol purification using carbon nanotube-filled polydimethylsiloxane mixed matrix membranes

• Equivalent circulating density prediction using artificial neural network

• Numerical simulation of CO۲-WAG process for proper design of operating parameters

• Heat Integration of Direct, Indirect, and Prefractionator Arrangements Using Multi-Effect Distillation Method in Separation of Ternary Mixtures

• Introducing a new method in energy optimization of n-butane and i-butane separation process

• An experimental and numerical approach to breakdown behavior in gas discharge between Mn nano-flower thinfilm as cathode and a stainless-steel ball as anode

• Seems Dragon is after a Closer Foothold in the Oil Fields: elite & corporate social responsibility in sustainable environmental protection

• Comparison of Pressure Swing Distillation and Extractive Distillation Methods in Separation of Maximum-Boiling Hemogenous Azeotropic Acetone-Chloroform Mixture

• Usage of SAR images in oil spill detection, a case study in the Northern Persian Gulf

• Analysing the Methods of Preparing Nanofluids for Enhanced Oil Recovery

• Heat integration of azeotropic distillation using benzene and cyclohexane as entrainers and pressure swing distillation for separation of water–ethanol mixture

• PDMS mixed matrix membranes modified by graphene nanosheets for ethanol/water pervaporation

• Comparison of vapor recompression and modified vapor recompression methods in separation of close boiling mixtures

• Numerical Analysis of Fluid Flow in a Deformable Porous Medium Using Finite Element Method

• The effect of brine’s salinity on the content of emulsion created in the oil and brine interface

• Comparision of Vapor Recompression with Vapor Recompression with an intermediate reboiler methods for separation propane- propylene mixture

• Well Clustering and Association Rule Mining

• Petrochemical wastewater pretreatment: A review

• Petrophysical Evaluation of Fahliyan Reservoir Formation

• Improving the Reliability and Economy of Hydrate Blockage Prevention Techniques

• A Review on Sustainable Hybrid Water Treatment Processes

• Extraction and determination of some polycyclic aromatic hydrocarbon pollutants in Persian Gulf water

• Application of ion-exchange resins in petrochemical industries

• Simulation of the aerosol nucleation rate in an amine absorption column

• BIM (Building/Project Information Modeling), AR/VR Technology & Innovation in Safety monitoring/Management of Oil & Gas Project/Plants