6TH INTERNATIONAL PM AUTO CONFERENCE, فروردین ماه ۱۳۹۷

Accepted papers in 6TH INTERNATIONAL PM AUTO CONFERENCE

• A Novel Approach to Controlling Grain Growth during the Liquid Phase Sintering Process of Powder Metallurgy of Compounds by Using Secondary Phase Particles

• Production of non-stoichiometric YBCO powder with high oxygen content by self-combustion sol gel method for the production of SQUID sensors

• Determination of critical and optimal powder loading for 316L stainless steel for Powder Injection Molding process

• ساخت و مشخصه یابی قطعه کامپوزیتی Cu/ZrO2 به روش متالورژی پودر برای کاربردالکترود جوش نقطه ای

• مروری بر روش های تولید کامپوزیت های تنگستن مس

• Mixing and feedstock preparation for micro-cemented carbide injection molding

• رویکردی نوین در کنترل رشد دانه حین فرایند سینترینگ فاز مایع قطعات متالورژی پودربه کمک استفاده از ذرات فاز ثانویه

• رویکردی نوین در ساخت فیداستوک اولیه جهت فرآیند تزریق پودرفلزی به کمک روش عملیات حرارتی ترکیبی

• Application of a low heat input deposition process for refurbishment of worn PM forming Dies using Nickel based filler metal

• Effect of copper infiltration and cooling rate on porosity and mechanical properties of Astaloy Mo sintered parts

• Fabrication of Copper-Titanium carbide/Alumina Nanocomposite by high energy ball milling

• سنتز پودر AStaloy Mo و بررسی خواص مکانیکی قطعات ساخته شده از این پودر

• بررسی ریزساختار و خواص مکانیکی قطعات متالورژی پودر آلیاژ نیکل-آهن

• ساخت نانو کامپوزیت مس-کاربید تیتانیم/الومینا به روش الیاژسازی مکانیکی

• بهره گیری از نفوذپذیری مغناطیسی در تعیین غیرمخرب مقادیر کربن، مس و فسفر در قطعات متالورژی پودر پایه آهنی

• اثر دمای فشردن گرم و میزان روانساز بر چگالی، سختی و ریزساختار آلیاژ پایه آهن

• مشخصه یابی غیرمخرب تغییرات ریزساختاری ناشی از اعمال شرایط متفاوت عملیات تف جوشی در قطعات متالورژی پودر

• Influence of carbon nanotube and graphen on the properties of copper matrix composite produced by powder metallurgy

• Investigation titanium-Graphene nanocomposite fabrication by powder metallurgy

• know how developmentfor the production of multi-component binders for the purpose of making optimal titanium fedstocks in powder injection molding process

• Method of manipulation functionally graded Tungsten-Copper composites

• Nondestructive determination of carbon, copper and phosphor contents in powder metallurgy steel parts using magnetic permeability measurements

• On the microstructure and mechanical properties of powder metallurgy iron-nickel alloys

• Synthesis of Co0.5Ni0.5Fe2O4 Nanoparticles by microemulsion route and effect of size and morphology on magnetic properties

• مطالعه خواص ریولوژیکی گرانوله های فولاد آلیاژی با هدف دستیابی به نسبت بهینه تزریق در فرایند قالب گیری تزریقی پودر فلزی

• تولید پودر غیر استوکیومتری YBCO با اندیس اکسیژن بالابه روش سل ژل خود احتراق برای تولید حسگر اسکوییدی

• بررسی تاثیر دمای تف جوشی بر خواص فیزیکی و مکانیکی فولاد زنگ نزن 316L در فرآیند قالب گیری تزریقی پودر فلز (MIM)

• Recent Developments in Compacting Technology

• لحیم کاری قطعات متالوژی پودر آهن با درصد کربن متفاوت توسط فلز پرکننده ی Ancorbraze 72

• A Simple Method to Estimate the Fully Reversed Bending Fatigue Strength of Porous Sintered Steels

• An Investigation the Effects of Particulate Reinforcement Volume Fraction and Heat treatment on the Hardness and Wear Properties of Al-%4 Cu-〖MoSi〗_2 Composites

• Improvement of defect detection system for powder metallurgy parts with digital radiography

• Prediction of density in powder metallurgy parts by digital radiography

• On the development of Al matrix nanocomposites for automotive industry: Compaction, Sintering, hot deformation and mechanical properties

• Melt spinning of ultrahigh strength aluminum-based amorphous alloys for automotive applications

• PRELIMINARY PROCESS PROTOTYPING TRAILS FOR PRODUCTION SCALE SINTER (BAINITE) HARDENING OF PM PARTS BY GAS QUENCHING

• Effects of synthesis parameters on the particle size of iron-nickel alloyed nanoparticles

• In situ fabrication of iron-nickel/alumina nanocomposite powders

• Characterization of HVOF Sprayed 75Cr3C2/25(80Ni-20Cr) Coating on 1018 Mild Steel in As-Sprayed and Heat Treated Conditions

• Current state and future Powder Metallurgy application opportunities in modern passenger cars

• Development of a Roadmap for Powder Metallurgy Technology in Iran up to 1410

• Dry sliding wear behavior of Mg/SiC composites

• Effect of carbide formation at CNT/Al matrix interface on the mechanical properties of Al/CNT composite

• Effect of hot pressing temperature and lubricant content on density and strength of iron powder metallurgy parts

• Effect of nano ZrO2 on grain growth during sintering of CuAlNi nanostructure

• Effect of sintering temperature on the mechanical and physical properties of 316L stainless steel by powder injection molding process (PIM)

• Effects of milling time on the SiC distribution and mechanical properties of hot extruded Al-SiC particulate composites

• Effects of WC on the microstructure and mechanical properties of the PM steel

• Fabrication and evaluation of the self-crack healing and mechanical properties of mullite/spinel/SiC composite

• Fabrication of Multilayer Al/Al-B4C/Al composite by High Pressure Torsion (HPT) Process

• Feasibility study of a novel method for production amorphous reinforced aluminum matrix composite of powder thixoforging

• تاثیر مقدار SiC و بار اعمالی بر رفتار سایشی کامپوزیت های Mg/SiC

• Influence of carbon nanotube and graphene oxide on the properties of copper matrix composite produced by powder metallurgy

• پیش بینی رفتار سایشی فولادهای متخلخل تف جوشی شده: راهکار شبکه عصبی مصنوعی

• اثر نانو ذرات ZrO2 بر رشد دانه ی آلیاژ CuAlNi در حین تفجوشی

• Synthesis and characterization of 4 nm nickel particles

• Manufacturing of Steel Foams through Powder Metallurgy Technique by Urea Granules as Space Holder

• ساخت کامپوزیت زمینه آلومینیومی تقویت شده با ذرات شیشه فلز به روش شکل دهی در حالت نیمه جامد

• بررسی اثرات کسر حجمی ذرات تقویت کننده و عملیات حرارتی روی سختی و خواص سایشی ماده مرکب 〖MoSi〗_2-Al-%4 Cu

• Manufacturing of WC-steel composites through powder metallurgy technique

• Investigation of properties of aluminum-Al2O3 powdered nanocomposite created by mechanochemical method

• بررسی تاثیر فاز کاربیدی ایجادشده در فصل مشترک نانولوله کربنی و زمینه آلومینیومی بر خواص مکانیکی کامپوزیت Al/CNT

• Effect of porosity: Vibration damp with porous material

• Investigation of floating die as a promising method in comparison to single action die to produce dense compacts with high aspect ratio

• New possibilities for the masteralloy approach

• Effect of Sintered Metal Powder Process Parameters on Strength of Alumina-Kovar Joint

• Synthesis and characterization of Cu-doped (Mn, Co)3O4 spinel nanopowders for solid oxide fuel cell (SOFC) application

• بررسی پایداری حرارتی کامپوزیت AA2124/MoSi2 تولید شده به روش متالورژی پودر

• Industrial digital radiography for defect detection improvement in powder metallurgy parts

• Inter-pass temperature effect on residual stress in multi-pass welding high strength low alloy steel

• Investigating the effect of copper contents on the microstructure, hardness and tensile behavior hyper-eutectic steel produced by powder metallurgy method

• Investigation of microhardness inhomogeneity of pure copper disks by HPT Processing

• Investigation of powder densification in floating and single action dies to produce dense compacts with high aspect ratio

• Investigation of properties of spot resistance welding of iron-copper alloy that produced by powder metallurgy to carbon steel

• Investigation of the microstructure and mechanical properties of in-situ copper infiltrated P/M parts

• Mix Concept Engineered for High Precision VVT components

• Development of tantalum-tungsten alloy by powder metallurgy method

• New Generation Iron Powder for Brake Pads

• Nondestructive characterization of microstructural changes in powder metallurgy parts subjected to various conditions of sintering and steaming treatments

• Numerical Consideration Diffusion of Wave Propagation in Different Transmitting Mediums for Suitable Operation of Explosion Forming

• Numerical Simulation of the Impact Type of Input Material Gate in the Injection Step of the 316L Metal Injection Molding Process.

• Cr materials a Means to Lift Mechanical Properties to Next Level, Enabling New Challenging Applications

• PM problem solving using Metallography

• Powder Mixes with new lubricants for Part Precision and improve productivity

• Prediction of Wear Behavior in Porous Sintered Steels: Artificial Neural Network Approach

• Production of glassy reinforced aluminum matrix composite via semisolid powder forming

• Production of iron powder from hematite iron ore by using non-coking coal through Hoganas process and comparison of its properties with Hoganas sponge powder grades

• Powder Metallurgy Manufacturing and Characterization of a Cu/ZrO2 Composite Part for Spot welding Electrode Application

• STARMIX 500i FOR EXCELLENT LUBRICATION AND GOOD FILLING

• Structural and mechanical behavior of Al2O3-reinforced Fe metal matrix composites (MMCs) produced by powder metallurgy (P/M)

• Study of thermal stability of AA2124 / MoSi2 composite produced by powder metallurgy

• Synthesize of the Astaloy Mo powder and investigation of the mechanical properties of the produced parts

• The effect of graphite upon brazability of ferrous powder metallurgy components using Anchorbraze 72 filler metal

• The production of Lithium nano powder from brines by hydrometallurgy for use in automobile batteries

• The production of silver nano powder from electronic waste by hydrometallurgy with application in the automotive industry

• Wear behavior of B4C -reinforced Al alloy matrix composites (MMCs) produced by powder metallurgy (P/M)

• Application of a low heat input deposition process for refurbishment of worn PM forming Dies using Fe-Ni based filler metal