Polymer Processing Society 2011 Asia/Australia Regional Meeting, آبان ماه ۱۳۹۰

Accepted papers in Polymer Processing Society 2011 Asia/Australia Regional Meeting

• Laboratory Investigation of Gel Polymer Performance in Enhanced Oil Recovery

• Preparation and properties of reactive melt compounded bimodal polyethylene for usage in steel pipe coating

• Investigation on Physical Property Changes of Polyethylene Gas Pipes Initiated by Incorporation of an Antirodent Masterbatch

• The effect of shear strain amplitude and loading cycle on the horizontal characteristics of fiber reinforced nanocomposite elastomeric seismic isolators

• Synthesis and Characterization of Antibacterial Polyurethanes Coatings from Novel Quaternary Ammonium Functionalized Soybean Oil-Based Polyols

• Polypropylene and corn starch biocomposites: Investigation the biodegradability in fungal culture medium

• Polypropylene and corn starch biocomposites: mechanical and morphological properties

• Investigation on mechanical properties of PC/ABS blends in presence of ABS-g-MAH as a compatibilizer

• Aging Influence on Charpy Impact Behavior of Basalt Fibers Reinforced Epoxy Composites

• Morphology Evolution through HDPE/PA-6/EVOH Ternary Blends: The Effects of Temperature and Composition Ratio

• The Influence of Poly (acrylic acid) Spacer Presence on Surface Properties of Medical-grade PVC Coated with Antibacterial Agents

• Investigation of G5-PPI Dendrimer Nano-Structure Dye Absorption Behaviour

• Structure-Property Relationships in Dicyandiamide-Cured Epoxy Resins

• The Effect of Clay Content on Bonding Properties of Novolak Adhesives

• Verification of the mixing model for heterogeneous multiphase system applied in rotational rheometer geometry

• The effect of foam processing conditions on the foaming dynamics of MMA-St copolymer

• Effect of coagulation bath temperature on morphology and performance of PES-Aerosil nanoparticle ultrafiltration membranes

• Effect of Delay time on morphology and performance of PES ultrafiltration membrane prepared by PES/SiO2/DMAC

• Fracture behavior and morphology of PMMA-organoclay nanocomposite bone cement

• Numerical investigation of the effect of different poly angles on crashworthiness behavior of hat shape energy absorbers

• Numerical investigation of different boundary conditions on crushing behavior of composite hat-shape energy absorbers

• Thermal conductivity, microstructure and mechanical properties of rigid polyurethane /clay nanocomposite foams

• An Experimental Investigation of Surface Quality and Defects of Profiles in Wood-Plastic Composite Extrusion Process

• Cell structure, thermal properties and flammability of extruded non-crosslinked LDPE/ Cloisite 20A nanoclay foams

• The Processing–Morphologies Relationships in Microcellular Foaming of ABS/TPU Sheets

• Characterization and purification of by-product polyethylene wax from slurry high density polyethylene process

• Development of a Compatibilizer-Free Polyethylene/Starch Blend via Solid-State Processing

• Modeling and Simulation of Dimethyl Ether Production from Methanol Dehydration by Reactive Distillation

• Comparison of Oxygen Plasma with Corona Discharge Treatment of Polypropylene Powder

• Castor oil based polyurethane coatings with efficient antibacterial function and high biocompatibility via incorporation of glycidyltriethylammonium chloride

• Castor Oil based Poly(urethane-co-pyrrole)s as Novel Electroactive Anticorrosive Coatings for Steel

• Synthesis and Characterization of Antibacterial Polyurethanes Coatings from Novel Quaternary Ammonium Functionalized Soybean Oil-Based Polyols

• Microwave absorbing properties of Cr2O3/ZnO nanofibers and TSIL as the filer in polymer foams

• Fabrication and electromagnetic characteristics of electromagnetic wave absorbing IL/BaCO3/epoxy resin coatings

• Investigating on the effective site exist in the molecular structure of a lactone compound which accelerate photo-oxidation of PE films in exposure to uv-rays of sun light

• Compatibilization and morphology improvement of PA66/HDPE blends by addition of modified EVOH and nanoclay

• Thermoplastic starch-filled polypropylene nanocomposite: Evaluation of mechanical, thermal and morphological characteristics

• Polyurethane Coatings Based on Castor Oil and Benzyl Triethanol Ammonium Chloride: Synthesis, Characterization and Biological Properties

• Investigation on Effect of Wood Content on Recycle Ability of Extruded Wood-Plastic Composites

• Experimental Study on theEffect of Melt Flow Index on Properties of Virgin and Reprocessed Wood-HDPE Composites

• Prediction of Nitrogen Solubility in Polymers using Adaptive Neuro Fuzzy Inference System

• Rheological behavior of an injectable scaffold for bone tissue engineering

• Adsorption of Copper ions onto Electrospun PAN Nanofiber

• New Investigation on polymer concrete composites

• Effect of Organo-Modified Montmorillonite (O-MMT) on Mechanical and Barrier Properties of LLDPE/LDPE Blend Films

• High stable water-based ferrofluid for biomedical applications obtained by grafting polyglycerol onto superparamagnetic iron oxide nanoparticles

• An Experimental and numerical failure analysis of FML plates with circular cutouts under in-plane loading

• Stress Analysis of Grid Cylindrical Composite Shell with Circular Cutout under Axial Compression

• Modification of Cotton by Fluorination Treatment

• Melt-crystallization behavior and non-isothermal crystallization kinetics of UHMWPE/HDPE/MWCNTs nanocomposite

• Recycling of Lead Acid Battery Cases Polypropylene in Combination with Thermal Stabilizers and Virgin Polypropylene

• Nanocomposite Hydrogel of Wheat Straw-g-Poly (acrylic acid) and Modified Montmorillonite: Preparation, Swelling properties and Release of paraquat from it

• Gelation Behavior of Poly(Methacrylamide-co-Methacrylic acid) in the Presence of Hydroxyapatite Powder Using Stress Viscometry

• Release of Tetracycline Hydrochloride from Semi-Interpenetrating Polymeric Network Based on Poly (methacrylamide-co-methacrylic acid

• Determining The Effect Of Organically Modified Montmorillonite On Polyelecterolyte Membranes based on Sulfonated Aromatic Polymers To Used In Direct Methanol Fuel Cells

• Polymeric Nanocomposite Membranes,Based on Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite, as High-Performance Materials for Fuel Cell Applications

• Structure-Property Relationships in Anhydride-Cured Epoxy Resins

• An Investigation on the Effects of Functionalized Multi-walled Carbon Nanotube on Mechanical and Electrical Properties of PA 6 Nanocomposite Fibers During the Melt Spinning Process

• A Study on Relation of Morphological, Structural and Rheological Properties on Dye Uptake of PP/PBT Melt Spun Polyblend Fibers with Blend Ratio Variation

• Polyaniline/polyvinylidene fluoride composite membranes for gas separation

• Preparation of PLA/PVA microspheres as drug release carriers

• Study on the effect of 7-hydroxycoumarin on photo-oxidative degradation of LLDPE films

• FEM and Theoretical Analysis of Equivalent Stiffnesses of Trapezoidal Corrugated Composites in Different Direction of Corrugation

• Investigation of Fiber Angle Effects on Pressure-Temperature Capacity of Composite Pressure Vessels

• Investigation of Thermal Behavior of Trapezoidal Corrugated Composites

• Stiffness Matrices Terms for Quasi-sinusoidal corrugated composite

• Study of nano-reinforcing fillers effect on the lap shear strength of epoxy adhesives

• Prediction of Tensile Modulus of PP/Nanoclay/CaCO3 Ternary Nanocomposite

• Nonisothermal Crystallization and Melting Behavior of PP/Nanoclay/CaCO3 Ternary Nanocomposite

• The effect of paraffin wax quality on physico-mechanical properties of rubber compound based on NR/BR

• The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers

• Modeling and Optimization of Toughness of Hybrid Polyamide 6 Nanocomposites using Artificial Neural Network and Response Surface Methodology

• Tribological properties of UHMWPE/HDPE/ MWCNT nanocomposites

• Polymeric membranes for industrial oily wastewater treatment

• Crystallization and thermal behavior of polyamide 6/ poly(ethylene-co-1-butene)-graft-maleic anhydride/organoclay nanocomposites

• Polymeric membranes for industrial oily wastewater treatment

• Investigation of Rheological, Mechanical and Water Absorption Properties of LDPE-Thermoplastic Corn Starch Blends

• Preparation and Properties of LDPE-Thermoplastic Corn Starch-OMMT Nanocomposites for Packaging Applications

• Glass Transition and Cooperative Dynamics in PMMA/SAN/Clay Nanocomposite

• Preparation and Evaluation of Polyacrylamide/Laponite Nanoparticles suspensions for Enhanced Oil Recovery Applications

• Effect of Nanoclay on Steady Shear Behavior and Morphology of Polyethylene/High Impact Polystyrene blend Nanocomposites

• Rheological Properties of Different Rubber Compounds:Effect of Process Oils

• Pilot-scale plant investigation of blocking mechanism in oily wastewater from refinery processes treatment by polymeric membrane filtration

• Investigation of elastic moduli of polypropylenereinforced with deformed single wall carbon nanotube based on FEM

• Fractal Characteristics of Phase Separation Morphology

• Mechanical properties of anisotropic low density rigid polyurethane/organoclay nanocomposite foam

• Apparent viscosity prediction of carboxymethyl-cellulose polymer aqueous solutions using artificial neural networks and regression techniques

• Morphology and Dynamic Viscoelastic Properties of PC/PBT/Nanocomposites

• Characterization of severely degraded silicone composite HV insulator

• The Effects of Processing Parameters and Layered Silica Nanoclay Content on Morphology of Microcellular Foam Based on PP/EPDM/Organoclay by Response Surface Methodology (RSM

• Water vs. Gas Assist Injection Molding: Comparison and New Developments

• Shear Rheology of Blends of a Linear and a Long Chain Branched Polypropylene

• Viscoelastic Behavior of the Polyacrylamide Nanocomposite Hydrogels for Water Shut-off Applications

• The Effect of Carbon Nanotube Aspect Ratio on Reinforcement Efficiency in Nanocomposites

• Tensile Properties of Alkali Treated and Raw Date Palm Fiber Reinforced PP/EPDM Composites

• Dynamic Analysis of Composite Drillstring with FEM

• Experimental Investigation On GFRP Composites Under High And Low Velocity Impact

• Effect of nano-particles geometry on the recovery of polymer nano-composites in the melt state

• Study on Creep and Recovery of Water-in-Crude Oil Emulsion

• New method for evaluation result of coated sheet metal panel by the impact folding tester

• Rheological Study of Heavy Crude Oils and Their Emulsions

• Simulation of the Crystallinity Effect on Cell Growth in Semi-Crystalline Microcellular Foams by Semi Solid-State Batch Foaming Process

• Piezoresistive PP/EPDM (TPV) Thermoplastic Vulcanizate Nanocomposites Based on Nanographite / Nanoclay Hybrid

• Wellbore Stability in Shale Formation: Modeling the Effects of Polymers in the Drilling Fluids Formulation

• Performance of Methane Hydrate Formation In the Presence of Low-Dosage Poly (Ethylene Oxide)

• Thermodynamic Investigation of the Stability of Copolymer Grafted Bentonite Nanoclays in an High Salinity Electrolyte

• Preserving anti-corrosion properties of polyurethane based coatings exposed to humidity and UV-radiation using nano Titania

• Simulation of hot runner system effect on injection molding process in compare with cold runner

• The effect of SiC nanoparticles and nanowhiskers on tensile properties of SiC/Epoxy nanocomposites

• Nanomechanical Characteristics of Photo-Cured Cyanoacrylate Bioadhesives Containing TMPTMA or POSS Nanostructures as Crosslinking Agents

• Investigating the effect of polymeric foam on the penetration of projectile in the foam-filled honeycomb structures

• Controlled Release of Triclosan and Its Effect on the Antibacterial Properties

• The feasibility of using a novel fluid system as sand clean out for high temperature application- Experimental Study

• Preparation and Properties of Tetracycline Hydrochloride Loaded Electrospun PLA/PCL Nanofibers for Wound Dressings

• Physical-Mechanical Properties of Polyurethane-Polyisocyanurate Organoclay Nanocomposite Foams

• Epoxy Siloxane/ Montmorillonite Nano composite , Anticorrosive and Mechanical Properties

• Preparation and characterization of multi-walled carbon nanotubes/polymer blends as ultrafiltration membranes

• Experimental study of drag reduction in crude oil of an Iranian oil field

• Influence of increasing Rubber Concentration on mechanical and X-ray diffraction (XRD) characteristics of Dynamically Vulcanized Thermoplastic Elastomers Nanocomposites based on LLDPE/Reclaimed Rubber

• The effect of compatibilizer on mechanical properties and morphology characteristic of TPV nanocomposites based on LLDPE/Reclaimed Rubber

• Corrosion behavior and mechanical properties of cured epoxy_ glass flake nanocomposite coatings on galvanized steel

• Electrochemical study of corrosion properties of low carbon steel in 1M HCl in the presence of novel cationic surfactant

• micro-injection molding mIM:a new processing in plastic injection

• Investigation of Thermal Transition and Mechanical Properties of NR/SBR Composites Filled with Carbon Blacks and MWCNT

• Synthesis of polymeric beads with tunable size and porosity and their application in removal of Cr(VI)

• Correlation of Morphology and Mechanical Properties of Novolac Phenolic Resin/Clay Nanocomposites Prepared via SolutionMixing Method

• Effects of Different Synthesis Conditions on the Morphology of Molecularly Imprinted Nanoparticles

• Solving the Undesirable Polymerization Problem in the Industrial Unit of Styrene Production

• Macroscopic behavior of Polymer Foams based Micromechanics Using Finite Element Method

• Macroscopic behavior of Polymer Foams based Micromechanics Using Finite Element Method

• Modeling and Simulation of Generalized Newtonian and Viscoelastic Fluid Flows in Screw Turning Extruder in the Presence of Leakage Flow Using OpenFOAM Software

• Simulation of composite delamination with Cohesive Zone Model

• Kinetic study of polyurethane foam growth rate in order to use as a braking mechanism in a vehicle model

• Effect of Surfactant on Wettability Alteration by Sol-gel Process in Gas Reservoirs Using

• Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Monomers Composition and Cell Modifying Aid

• Mechanical properties of alumina / polymer – based nanocomposites

• Preparation and optimization of polyamide 66 nanofibers diameters by D-Optimal design method

• Self cleaning effects on the glass substrates with TiO2-V thin films prepared by sol-gel method

• The effect of nano-Fe2O3 particles on the corrosion performance of waterborne polyurethane coating

• Production of Coaxial Cables with Extrusion Foaming using Butane as Blowing Agent

• Three-Dimensional Simulation of mold filling of viscoelastic fluids using finite volume method

• Manufacturing of polypropylene/silica nanocomposites using in-situ polymerization and investigation of product properties

• Experimental study of wettability alteration to gas wetness using fluoroalkylsilanes in gas/condensate reservoirs

• Flame retardant behavior of epoxy / glass / multi walled carbon nanotubes

• Drag-reduction Effective of SBR in Horizontal Circular Pipe Setup

• The effect of nanoclay (NC) type, molecular weight of PVC and varying amount of nanoclay(NC), on the mechanical and thermal properties of PVC/clay nanocomposites

• Fabrication of Silica anofibers via Electrospinning/Post Thermal Treatment

• Investigation on the Effect of Physical properties on Corrosion Resistance and Adhesion of Latex paints Applied on ferrous substrates

• Surface Modification of Clay-PAN composite nanofibers

• Study on Electrospinning of Chitosan Nanofibers

• Production of spherical cellulose nano-particles from the waste cellulose fibers

• Kinetics of Dextran Crosslinking by Epichlorohydrin: A Rheometry and Equilibrium Swelling Study

• The effect of electrospinning time on some physical and mechanical properties of Polyurethane Electrospun nano mat

• Synthesis of rigid polyurethane foam from PET wastes

• Rheological, Mechanical, and Oxygen Barrier Properties of Polymer/layered Silicate Nanocomposite Films based upon PE and EVA

• Morphological study of polyamide-6/silane-grafted-high density polyethylene/nanoclay ternary nanocomposites

• Investigation of the effect of ultrasonic waves on physical and mechanical properties of epoxy resin

• Rheological Aspects of Rotational Foam Molding

• Phase Separation of Ternary Polymer-Polymer-Solvent System on Patterned Substrate

• Poly (styrene-co-ethylhexylacrylate) latex with various functional groups: Mean-field model of melt intercalation for polymer/clay nanocomposites

• Investigating the Effect of Surface Modification of TiO2 Nano Particles on Critical Pigment Volume Concentration

• The Effects of Significant Conditions on the Dispersion of Epoxy-matrix Nanocomposites and Its Mechanical Properties

• Investigation the Effect of Laser Fluence and Pulse Number on Surface Modification of Clay-Pan Composite Nanofibers

• Removal of formaldehyde from liquid phase by polyacrylonitrile / TiO2 Nanofibers

• Mechanical and Barrier Properties of Uniaxially Stretched Multilayer Nylon/Clay Nanocomposite Film

• Preparation of Polyurethane Nanocomposites via In-situ Polymerization: Study of Mechanical and Thermal Properties

• New Application of Off-grade Poly (ethylene terephthalate) via the Partial Glycolysis Method in order to Synthesize Maleated PET as a Compatiblizer for Preparing PET Nanocomposites

• Quantitation of the reinforcement effect of SiAlON nanoparticles on the tribological and corrosion resistance of epoxy coating

• Silylation of Organoclay (Cloisite 30B) with trifunctional 3-(trimethoxysilyl)propyl methacrylate

• HTPB-Grafted Nano-Silica for Use in SBR Compounds via Solution and Melt Mixing

• Effect of single walled carbon nanotube on mechanical and morphological properties of dynamically vulcanized thermoplastic elastomer based on NBR/PVC

• Preparation of Nanocomposites based on NR/ BR (Cure Characteristics, Microstructure & Mechanical Properties)

• Toughening Mechanism of Polymer/ Layered Silicate Nanocomposites

• Preparation and Investigation of Mechanical Properties of Novel Sulfur Polymer Composite

• Effect of Clay Loading on Mechanical Properties of Highly Filled Nanocomposites

• Cure Kinetic Behavior of Structural Epoxy Adhesive Film by Isothermal Differential Scanning Calorimetry

• Dynamic Modeling of Spinodal Decomposition Phase Separation Kinetics in Asymmetric Polymer Blends

• The Critical Micelle Concentration for the Solution of PLGA/PEG Tri-block Copolymers

• Comparative Study of Cohesive and Interfacial Fracture Testing of Structural Adhesive

• Effect of Polymer-Clay Intercalation and Sequence of Melt Compounding on the Properties of PP/EPDM/Organomontmorillonite Nanocomposites

• Synthesis and Characterization of Aqueous Processable Polyaniline (PANI)/Graphene Hybrids as Potential Source of Transparent Conductive Materials

• Study of the effect of nano alumina on electrical and mechanical properties of cast epoxy composite

• Experimental Investigation and Modeling of Polymer Flooding in Fractured Heavy Oil Reservoirs Using Five-Spot Micromodels and UTCHEM Software

• Mechanical Properties of MWNT/Epoxy Polysulfide Nanocomposite

• Influence Of Graphene-oxide Nanosheets On Die Swell Behavior And Rheological Properties Of Polyvinyl Alcohol Aqueous Solution

• Effects of organically modified nanoclay on structure and mechanical properties of flexible polyurethane foams

• Investigation on the Effect of Physical properties on Corrosion Resistance and Adhesion of Latex paints Applied on ferrous substrates

• Elimination of Acid Yellow 36 by PPI Dendrimer-Chitosan Hybrid: Preparation, Characterization, RSM, Kinetic and Isotherm Adsorption Study

• Biodegradable Chitosan/Polyethylene Glycol Fumarate Blend Films

• Investigation of Parameters Effects on Electrospinning ofPoly(Ethylene Terephthalate) Nanofiber

• Prediction of Glass Transition Temperatures for some Polyimides using QSPR analysis

• Dispersion study of titanium dioxide into the polyurethane nanocomposite coatings

• Introducing Self-cleaning Property to Acrylic Coatings using Fluorosilane Treated TiO2 Nanoparticles

• Thermoregulated non-woven fabric treated with microencapsulated phase change materials suitable for smart textiles

• Preparation and characterization of polyurethane foam treated with phase change material microcapsules as potential thermo-regulating textiles

• Evaluation of Nanosilver as Antibacterial and Barium Sulfate as Radiopaque on Mechanical Properties of EVA Hollow Fibers

• Comprehensive mechanical evaluation of carbon black/polyurethane nanocomposite coating compounded through ultrasonication method

• Preparation of Epoxy Nanocomposite by Epoxy Functional Multiwall Carbon Nanotube and Study of Non-Isothermal Cure Kinetic

• Preparation of Spherical and Rod Shape Nanopowder by Polymer Template

• Effect of Fiber Volume Fraction on Stress Distribution in Polypropylene Composites Reinforced by Glass and Carbon Fibers

• Effect of co solvent affinity with water on membrane morphology in immersion precipitation process

• Preparation of Pyrrole - SWNT and Pyrrole - Thiophene Conductive Polymer Composites

• Hydrophobic Cellulose via Silica Base Polymer Blends

• Properties and Rheological behavior of PCC-GTR Modified Bitumen

• On the Phase Inversion Phenomenon in a Feather Keratin/Nylon 6 Blend as Deduced from Atomic Force Microscopy

• Improving Thickening Properties by using Novel Acrylate and Diacrylate Crosslinkers

• Relationship between Cell Compatibility and Elastic Modulus of Silicone Rubber/Organoclay Nanobiocomposites

• The evaluation and optimization of Impact Strength of PP/PC/SEBS Ternary Blends by Using Taguchi Methodology

• SEBS-g-MAH compatibilizer precursor for PP/PC/SEBS Ternary Systems

• Effect of the blending sequence on the microstructure and mechanical properties of PET/EPDM, EPDM-g-MA/organoclay ternary hybrid nanocomposites

• Study on the effect of re-modification of MWCNT on the rheological properties of epoxy/CNT nanocomposites

• Preparation and Investigation of Mechanical and Antibacterial Properties of Poly (ethylene terephthalate)/Chitosan Blend

• Improving production temperature of polymer modified bitumen by waxy materials

• Application of Silver Nanoparticles in the Reverse Osmosis Membrane

• The Effect of Processing Parameters on the Thermal Conductivity of LDPE/UHMWPE Blend Foams

• Thermal Degradation of HDPE/Caco3 Nanocomposites: Effect of Content of Nano and MFI

• Correlation of Morphology and the Thermal-Oxidative Degradation Behavior of PET/NBR/PC Ternary Blends

• Preparation and characterization of polyvinylchloride/thermoplastic polyurethane blend membranes

• Preparation and Properties of NBR Nanocomposites Containing Montmorillonite

• Enhancement of the Properties of BR/EPDM Compounds using Organoclay

• Fabrication of a biopolymer fibrous scaffold for nerve tissue engineering

• Biocompatilbility evaluation of a natural polymer-based scaffold

• Effect of E-beam irradiation on crystalline-phase transition of PVDF/nanoclay nanocomposites

• Preparation and characterization of PVDF magnetic nanocomposite films

• Thermal Shock Cycling Effect on Flexural Properties of Phenolic Based Composites Reinforced By Basalt and Carbon Fibers

• Fabrication and characterizationof polyurethane/3A°zeolite mixed matrix Membrane for gas separation

• Modeling and Simulating of Straight Section of Jet Flow in Electrospinning Process: Using Non-Newtonian Behavior

• Gas separation properties of the polyurethane/poly (vinyl alcohol) (PU/PVA) blend membranes with different PVA molecular weights

• Metallic / Nonmetallic Photo-initiators Effects on Photo-oxidative Degradation of LDPE

• Collagen nanofibers and their applications in skin tissue engineering: A Review

• A Novel Modified SBA-15 Supported Catalyst Using Multidentate SNS Ligand for Atom Transfer Radical Polymerization (ATRP

• Effect of Structural and Processing Condition on the Morphological and Rheological Properties of HDPE/PS Nanocomposites Reinforced with Nano-Sio2

• Influence of maleated polyethylene on morphology and thermal degradation behavior of PE based nanocomposites

• Study on Morphology-Rheology of Nanocomposites Based on an Immiscible Rubber Blend and Organoclay

• Evaluation of Thermal Properties of Modified Acrylic Fibers Precursor for the Fabrication of Carbon Fibers

• Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Molecular Weight and Particle Size Distribution

• Influence of the kind of organoclay on morphology and mechanical properties of (SBR/NBR) as an immiscible rubber blend

• Effect of Epoxidized Natural Rubber on Dispersion of Organoclay and Curing Behavior of NR/BR/Organoclay Nanocomposites

• Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Monomer Composition and Cell Modifying Aid

• Experimental and Numerical Investigation of Mixed-Mode Fracture of Polyester Resin

• An Experimental Investigation on the Effect of Nitrile Butadiene Rubber (NBR) on Mechanical Properties of PVC/Wood Flour Composites

• Effect of Nano Silica on Mechanical Properties of Chlorosulfonated polyethylene compounds

• Effect of pistachio shell flour and coupling agent on mechanical property wood plastic composite

• Synthesis and Characterization of PEGylated Magnetite Nanoparticles for Drug Delivery Applications

• Study of Effect of pressure and temperature on the gas separation properties of a novel copolyimide membrane with flexible moieties

• Study of Electrospinning Process: Effect of Viscosity on Morphology of Electrospun PAN/ MWNTs Nanofibers

• EXINMOLD - a design support software for injection mold makers

• Determining fracture toughness as a cohesive zone parameter of a wood plastic composite

• On the effect of unit cell parameters in predicting the elastic response of wood particulate-polymer composites

• Study on Gelatin/Ag Nanofiber for biomedical Application

• Cure Kinetics of Epoxy Resin and Photoactive Aromatic Diamine Reinforced with ZnO Nano Particles

• Modeling of dissolving of nano-core-shell particles in two phase viscosity prediction during polymer flooding

• Microporous membrane formation via thermally induced phase separation: Effect of temperature and evaporation time on membrane morphology

• Preparation of small water- soluble CdSe quantum dots by immobilization in poly (acrylic acid) grafted onto Kappa- Carrageenan

• Anisotropic flat sheet membrane formation via TIPS

• The effect of nanoadditives on viscoelastic parameters of bioadhesive gels composed of cellulose derivatives

• The effect of different nanofillers on water uptake and gel point of polysodiumacrylate hydrogel nanocomposite

• Optimization of microbial culture for production of poly hydroxy butyrate (PHB) by azotobacter beijerinckii DSMZ-1041

• Thermal stability and flame retardancy of synthesized halloysite nanotubes (HNT)/ethylen propylene diene monomer (EPDM) nanocomposites

• Nanocompositesbased on poly(vinyl butyral) and soft magnetic Magnetite (Fe3O4) nanoparticles – synthesis, processing and characterization

• Nano membrane based Polyamide Modified by Polymer Blending Process

• Effect of Dissolved CO2 on the Crystallization Behavior of PLA with Various D-contents

• Effect of Hard Segment Distribution on the Foaming Behavior of Thermoplastic Polyurethane (TPU

• Effects of Processing, Molecular Weight, and Inorganic Filler Type on the Rheological Properties of Linear Polylactide

• Developing an Optimum Cure Cycle Using Differential Scanning Calorimetry for tetra Functional Epoxy Cured with a Cycloaliphatic Amine

• Poly(ε-caprolactone diacrylate)/Polyhedral Oligomeric Silsesquioxane Hybrid Organic/Inorganic Nanocomposites: Thermal Studies

• Rheological Behavior of Aqueous Polymer Solutions

• Effect of blending of polymer containing carbonyl group on crystalline structure of PVDF

• Interfacial and Rheological Behavior of a Partially Hydrophobic Silica Nanoparticle Suspension in Aqueous Medium

• Polycaprolactone/Polyhedral Oligomeric Silsesquioxane Hybrid Organic/Inorganic Nanocomposites: Mechanical and Nanomechanical Analyses

• A facile and efficient method for graphite oxide nanosheets powder preparation

• Preparation of a novel pH-responsive Au nanoparticle/poly (acrylic amide) grafted onto salep composite hydrogel

• Rheology of Concentrated Polystyrene Solution

• Enhanced mechanical and rheological properties of EPDM/Graphite oxide nanosheets nanocomposite

• Investigating Vibration Behavior of Single-Walled Carbon Nanotubes Using Finite Element Method

• Effect of Concentration on Rheological Behavior of Polystyrene/Ethyl Benzene Mixtures

• Nanoindentation of Isotactic Polypropylene: Correlations between Hardness, Yield Stress, and Modulus on the Local and Global Scales

• Application of Grafting Method for Modification of Precipitated Silica in Rubber Compounds

• Toughened Polyamide 6 Hybrid Nanocomposites: The Morphology and Permeability Relationship

• Evaluating the Effect of Nanoclay on Surface Tension of High Density Poly ethylene melt using Pendant Drop Method

• Shape Transition of Magnetic Field Sensitive NdFeB Filled PVA Hydrogels

• Reactive Compatibilization of Polyamide-6/Polycarbonate Blends by using Maleated SEBS

• Processing Considerations in the Recycling of Wood-Plastic Composites

• Dynamic-Mechanical Properties of Fumed Nanosilica-SBR Composites Prepared by a New Strategy in Melt Mixing

• The Effect of Mixing Procedure on Rheology and Morphology of Bitumen Modified by Polybutadiene –Nanoclay

• Influence of Rubber Concentration on the Microstructure and Performance Properties of High Cis1, 4-Polybutadiene Rubber- Modified Bitumen

• An Investigation of the Effects of Layered-silicate on Morphology, Permeability and Mechanical Properties of Polyethylene-based Nanocomposites

• Devulcanization of Ground Tire Rubber Powder by Reactive Mixing Process; Effect of Modifier

• Fabrication of Nano Silica Synthesized From Rice Husk / Epoxy Resin Nano Composites and Study of Their Mechanical properties

• Nano hydrogel preparation of chitosan and diglycidyl ether compounds and study of thermal, swelling and drug releasing properties

• THE INFLUENCE OF ELASTOMER CONTANT ON MORPHOLOGY, TOUGHNESS AND CHEMICAL COMPOSITION OF EPOXY/ELASTOMER COMPOUND

• Biopolyemr Nanocomposites with Enhanced Photocatalytic Antimicrobial Activity and Barrier Properties Based on LDPE- nano Tio2/Organoclay Hybrid

• Synthesis and characterization of soluble poly(imide-ether-imidazole)s based on trifluoromethylated aromatic diamine with fluorene pendent group

• Synthesis of polyimide membrane for the separation of CO2/CH4 gases

• Bending Failure Behavior of Sandwich Beams Manufactured by Vacuum Infusion Process

• STUDY OF bitumen composites of POLYACRYLAMIDE USE IN asphalt industry: wide temperature range performance

• Exprimental and simulation Study on the Effect of Process Parameters on the Warpage of thin-shell Injection Molded Parts

• Preparation, Structure and Properties of 50/50 NR/BR Blend/ Clay Nanocomposites

• Flexural Properties of Sandwich Panels with Perforated Core - Hole Number and Pattern Investigation

• Polyurethane-ZnOnanocomposite membranes for gas separation

• Mechanical Behavior of Non- Homogenous Cylindrical Foam under Internal and External Pressure

• Preparation of Water-Soluble poly (styrene-co-(chloromethyl) styrene) in the Presence of nanoporous β-Cyclodextrin: Applicable to Remove Copper (II) from Water

• Preparation of Core-Shell, Organic-inorganic, Hybrid Latexes via a New Single-step Pickering Emulsion Polymerization Method

• The Synthesis of Monodisperse Nano-Porous Styrene-Divinylbenzene Copolymer Particles by Seeded Dispersion Polymerization Method

• Development of Artificial neural network and neuro-fuzzy for Taguchi based erosion behavior of GF-reinforced polyester composites

• Effect of Glycol Length on the Thermal Properties of Polyesters: PET, PTT, PBT Case Studies

• Taguchi technique to optimize effective parameters of chitosan treatment on cotton fabric to maximize antimicrobial properties

• Investigation of Constituent of PolysulfideSealant Used in Aerospace Industry and Effect of these Constituent in Shelf Life

• Investigating Expert system parameters on modeling performance of release behavior from an injectable in situ forming Drug Delivery System

• Modeling of Taguchi based MANFIS Method to Investigate the Performance of Batch Emulsion Polymerization of Vinyl Chloride

• A study on the toughening of PVC/Starch blends by MBS core/shell particles

• Application of CONNFFESSIT approach to study temperature effect on the flow behavior of dilute polymer solutions

• The effect of different flow fields on particle size distribution (PSD) in suspensions using modified population balance/DEM

• The Role of Nano Silica on Rheological Properties and Morphology Development of PP/PBT Blend

• Effect of Carbon nanotube dispersion quality on tensile properties of polyacrylamide nanofibers

• Predicting and Optimizing the physical-mechanical properties of epoxy/rubber/nano CaCO3 system using Taguchi approach, ANN and ANFIS methods

• The combined effects of a polymeric compatibiliser and nanoparticles on structure development and properties of polymer blends

• Nylon 6 Multi Walled Carbon nanotube electrospun nanocomposite nanofibers membrane crystallography

• The Effects of Organoclay and Compatibilizer on the Oxygen Barrier Properties of HDPE-based Nanocomposites

• Thermal and ablative properties of nano zirconium dioxide/phenolic resin/carbon fiber nanocomposite

• Preparation of a Thermally Reversible Gelation Polymer Containing Ciprofloxacin-PLGA Nanoparticles for Local Delivery of Antibiotics

• PHYSICAL AND MECHANICAL PROPERTIES OF SEBS/POLYPROPYLENE NANOCOMPOSITE REINFORCED BY NANO CaCO3

• Gas Separation Performance of Polyvinylchloride - Silica Nanocoposite Polymeric Membrane

• The Role of Organoclay on In-situ Microfibril Formation of Epoxy in Poly(butylene terephtalate) Nanocomposites

• Separation of olefin/paraffin by Cellulose Acetate-Silica Nanocomposite Membranes

• The Role of Thermodynamic Parameters and Mixing Kinetics in Determining the Morphology of Nanosilica Containing Ternary Blends: with Emphasize on Core-Shell Morphology

• The Morphology and Wettability of PDLLA/Al2O3 Nanocomposite Scaffolds

• Polymer Nanocomposite of Silver-Tin Dioxide Core-Shell Nanoparticles/PVA - Structural Investigation

• An investigation of structural changes in modified and oxidized PAN nanofibers using different concentrations of KMnO4 solutions

• Investigation of permeability and selectivity properties of polymer layer of poly (sulfone-imide-amide) to separate N2 from CH4

• Influence of various surface treated nano-silica particles on the optical properties of nanocoatings

• Synthesis and Characterization of silica/epoxy mutifunctional nanocomposite coatings prepared by sol-gel process

• Study on the Mechanical Properties of PP/SEBS-g-MA/OMMT Nanocomposites

• Interfacial tension measurement of PS/PA6 in the presence of compatibilizer by using breaking thread method

• Study on the Mechano-Optical Behavior of LDPE/Ethylene Vinyl Acetate/Nanoclay Nanocomposites for Film Packaging Applications

• The Effect of Clay on the Ablation Behavior of NBR/OMMT Nanocomposites

• Determination of Interfacial Tension in PS/PA6/clay Nanocomposite By Using Breaking Thread Method

• EFFECT OF CATIONIC SURFACTANT AND ACIDITY ON CHITOSAN NANOFIBERS

• The Effects of Miscibility on the Dynamic and Uniaxial Viscosity of HDPE/LDPE Blends

• Synthesis of polyimide membrane for the separation of CO2/CH4 gases

• The Effect of Calcium Carbonate Nanofiller on the Morphology and Mechanical properties of Natural Rubber Nanocomposites

• Uniaxial Extensional Behavior of Ziegler- atta High Density Polyethylenes

• The synthesis, spectral characterization and biological properties of a novel antimicrobial dye

• In situ polymerization of polystyrene in the presence of g-ABS

• Study on the mechanical properties of epoxy resin based on bisphenol F (DGEBF), in the presence of nanofiller

• Properties and Macromolecular Structure in Weld Interface of Pipe Grades Polyethylene

• Effect of Polyol, Diisocyanate and Chain Extender of Polyurethane Membranes on Separation of Higher Hydrocarbons from Methane

• Accelerated aging behavior of nano composite based on Response Surface Methods

• Preparation and characterization of thiolated carboxymethyl chitosan-β-cyclodextrin nanocarriers for oral controlled delivery of hydrophobic drugs

• Investigation of permeability coefficient at time of die of composite parts with honeycomb core in VARTM process as theoretical and experimental

• A study on dispersion ability and stability of TiO2 nanoparticles separately modified with oleic andstearic acid

• Investigation of cured shapes of trapezoidal corrugated composite skins

• Investigation of the viscoelastic properties of anatase TiO2-Polypropylene nanocomposites exposed to UV irradiation

• An investigation on the mechanical properties of epoxy resin bisphenol F with different curing agents via FT-IR spectroscopy

• Graphitized nanodiamond based PP/EPDM TPO composites with improved tribo-dynamic properties

• Axial compression tests on nanoclay epoxy-based fiber glass cylindrical shells

• Fabrication and investigation of permeability and selectivity of polyaniline membrane

• Rheology and Morphology of ABS/PA6 Immiscible Blends: Interpretation of rheological data with Palierne and Fractional Zener models

• Optimization Mechanical properties of PC/ABS Blends Using Taguchi Method of Experimental Design

• Gas permeation properties of polyurethane-TiO2 nanocomposite membranes

• The Influence of Nanoclay Partitioning on Microstructural Properties and Fibrillation Process in PP/PBT/Nanoclay Blend Nanocomposite Fibers

• Mechanical and Self- healing Properties of Latex Coatings Containing Ethyl Cellulose-based Core-Shell Microcapsules

• Effect of Multi-Walled Carbon Nanotube on Micro-phase separation behavior of Thermoplastic Polyurethane by Means of Rheology

• Effect of nanoclay surface modifier chemical reactivity on the morphology and the rheological properties of the PP/PA6 blend nanocomposite

• Mold Filling Simulation in the Injection Molding Process with OpenFOAM Software

• Application of Rheology on Evaluating of the Morphology of PA/PE/Clay Blend Nanocomposites

• Study on Clay Dispersion in ABS/Clay Nanocomposites Using Linear Viscoelastic Properties

• Investigation of mechanical properties of honeycomb composite parts made by VARTM and Hand Lay-up

• Electrical Conductivity and Percolation Threshold of Hybrid Carbon Fiber-Carbon Black Polymer Composites: Experimental Study and Modeling

• The effect of PEG concentration and coagulation bath composition on the morphology of microporous PSf membrane prepared via NIPS method

• The effect of linear low density polyethylene (LLDPE) molecular weight on the property of microporous membrane formation via thermally induced phase separation

• Impact of MEA and NaOH solutions on mechanical properties of microporous hollow fiber polymeric membranes structure

• The Evolution of Nanoclay Distribution in PC/ABS/Nanoclay Blend Nanocomposites via Rheology

• Fabrication of melt blended HDPE/EVA microporous flat sheet membranes via TIPS method

• Linear and Non-linear Viscoelastic Properties of PE/EVA Blend Nanocomposites

• Effect of the extrusion variables and chips water content on the thermal and molecular weight characteristics of nylon 6-6

• Preparation of Hexene-Ethylene Copolymers by the In Situ Copolymerization of Ethylene with Chromium trimerization Catalyst and Cp2(Ind)2ZrCl2

• Preparation of Antimicrobial methyl Methacrylate Polymer Nanocomposites with Surface Modification of clay

• Insitu polymerization of caprolactam in presence of NBR toward super tough PA6/NBR nano alloy

• Thermodynamic Parameters of Dyeing Compounded Fiber Grade PET using Hyperbranched Polymeric Additive by Disperse Blue 60

• The role of nano clay surface modifier in state of dispersion and morphology development in SAN/EPDM immiscible blends

• Study and Comparison of Mechanical and Morphology of Concrete Reinforced with Carbon Fiber and Concrete Reinforced with Treated MWCNTs

• Polymer flooding simulation in one of the oil reservoirs in southern Iran

• Gel-Polymers Applied in Oil Reservoirs Using Nano-Clay Particles

• Study and Comparison of Mechanical and Morphology of Concrete Reinforced with Carbon Fiber and Concrete Reinforced with Treated MWCNTs