Articles Stat:
Number of Articles: 385Number of Proceeding pages: 1715
Papers View: 553686
Polymer Processing Society 2011 Asia/Australia Regional Meeting
Polymer Processing Society 2011 Asia/Australia Regional Meeting In date 2011-11-15 by ,دانشگاه صنعتي اميركبير in City Kish Island was held. please refer to the following link to download all the papers of conference proceedings: _PROCEEDINGS Polymer Processing Society 2011 Asia/Australia Regional Meeting
Copyright © 2016 - All Rights Reserved - Symposia
Accepted papers in Polymer Processing Society 2011 Asia/Australia Regional Meeting
Laboratory Investigation of Gel Polymer Performance in Enhanced Oil Recovery
Preparation and properties of reactive melt compounded bimodal polyethylene for usage in steel pipe coating
Investigation on Physical Property Changes of Polyethylene Gas Pipes Initiated by Incorporation of an Antirodent Masterbatch
The effect of shear strain amplitude and loading cycle on the horizontal characteristics of fiber reinforced nanocomposite elastomeric seismic isolators
Synthesis and Characterization of Antibacterial Polyurethanes Coatings from Novel Quaternary Ammonium Functionalized Soybean Oil-Based Polyols
Polypropylene and corn starch biocomposites: Investigation the biodegradability in fungal culture medium
Polypropylene and corn starch biocomposites: mechanical and morphological properties
Investigation on mechanical properties of PC/ABS blends in presence of ABS-g-MAH as a compatibilizer
Aging Influence on Charpy Impact Behavior of Basalt Fibers Reinforced Epoxy Composites
Morphology Evolution through HDPE/PA-6/EVOH Ternary Blends: The Effects of Temperature and Composition Ratio
The Influence of Poly (acrylic acid) Spacer Presence on Surface Properties of Medical-grade PVC Coated with Antibacterial Agents
Investigation of G5-PPI Dendrimer Nano-Structure Dye Absorption Behaviour
Structure-Property Relationships in Dicyandiamide-Cured Epoxy Resins
The Effect of Clay Content on Bonding Properties of Novolak Adhesives
Verification of the mixing model for heterogeneous multiphase system applied in rotational rheometer geometry
The effect of foam processing conditions on the foaming dynamics of MMA-St copolymer
Effect of coagulation bath temperature on morphology and performance of PES-Aerosil nanoparticle ultrafiltration membranes
Effect of Delay time on morphology and performance of PES ultrafiltration membrane prepared by PES/SiO2/DMAC
Fracture behavior and morphology of PMMA-organoclay nanocomposite bone cement
Numerical investigation of the effect of different poly angles on crashworthiness behavior of hat shape energy absorbers
Numerical investigation of different boundary conditions on crushing behavior of composite hat-shape energy absorbers
Thermal conductivity, microstructure and mechanical properties of rigid polyurethane /clay nanocomposite foams
An Experimental Investigation of Surface Quality and Defects of Profiles in Wood-Plastic Composite Extrusion Process
Cell structure, thermal properties and flammability of extruded non-crosslinked LDPE/ Cloisite 20A nanoclay foams
The Processing–Morphologies Relationships in Microcellular Foaming of ABS/TPU Sheets
Characterization and purification of by-product polyethylene wax from slurry high density polyethylene process
Development of a Compatibilizer-Free Polyethylene/Starch Blend via Solid-State Processing
Modeling and Simulation of Dimethyl Ether Production from Methanol Dehydration by Reactive Distillation
Comparison of Oxygen Plasma with Corona Discharge Treatment of Polypropylene Powder
Castor oil based polyurethane coatings with efficient antibacterial function and high biocompatibility via incorporation of glycidyltriethylammonium chloride
Castor Oil based Poly(urethane-co-pyrrole)s as Novel Electroactive Anticorrosive Coatings for Steel
Synthesis and Characterization of Antibacterial Polyurethanes Coatings from Novel Quaternary Ammonium Functionalized Soybean Oil-Based Polyols
Microwave absorbing properties of Cr2O3/ZnO nanofibers and TSIL as the filer in polymer foams
Fabrication and electromagnetic characteristics of electromagnetic wave absorbing IL/BaCO3/epoxy resin coatings
Investigating on the effective site exist in the molecular structure of a lactone compound which accelerate photo-oxidation of PE films in exposure to uv-rays of sun light
Compatibilization and morphology improvement of PA66/HDPE blends by addition of modified EVOH and nanoclay
Thermoplastic starch-filled polypropylene nanocomposite: Evaluation of mechanical, thermal and morphological characteristics
Polyurethane Coatings Based on Castor Oil and Benzyl Triethanol Ammonium Chloride: Synthesis, Characterization and Biological Properties
Investigation on Effect of Wood Content on Recycle Ability of Extruded Wood-Plastic Composites
Experimental Study on theEffect of Melt Flow Index on Properties of Virgin and Reprocessed Wood-HDPE Composites
Prediction of Nitrogen Solubility in Polymers using Adaptive Neuro Fuzzy Inference System
Rheological behavior of an injectable scaffold for bone tissue engineering
Adsorption of Copper ions onto Electrospun PAN Nanofiber
New Investigation on polymer concrete composites
Effect of Organo-Modified Montmorillonite (O-MMT) on Mechanical and Barrier Properties of LLDPE/LDPE Blend Films
High stable water-based ferrofluid for biomedical applications obtained by grafting polyglycerol onto superparamagnetic iron oxide nanoparticles
An Experimental and numerical failure analysis of FML plates with circular cutouts under in-plane loading
Stress Analysis of Grid Cylindrical Composite Shell with Circular Cutout under Axial Compression
Modification of Cotton by Fluorination Treatment
Melt-crystallization behavior and non-isothermal crystallization kinetics of UHMWPE/HDPE/MWCNTs nanocomposite
Recycling of Lead Acid Battery Cases Polypropylene in Combination with Thermal Stabilizers and Virgin Polypropylene
Nanocomposite Hydrogel of Wheat Straw-g-Poly (acrylic acid) and Modified Montmorillonite: Preparation, Swelling properties and Release of paraquat from it
Gelation Behavior of Poly(Methacrylamide-co-Methacrylic acid) in the Presence of Hydroxyapatite Powder Using Stress Viscometry
Release of Tetracycline Hydrochloride from Semi-Interpenetrating Polymeric Network Based on Poly (methacrylamide-co-methacrylic acid
Determining The Effect Of Organically Modified Montmorillonite On Polyelecterolyte Membranes based on Sulfonated Aromatic Polymers To Used In Direct Methanol Fuel Cells
Polymeric Nanocomposite Membranes,Based on Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite, as High-Performance Materials for Fuel Cell Applications
Structure-Property Relationships in Anhydride-Cured Epoxy Resins
An Investigation on the Effects of Functionalized Multi-walled Carbon Nanotube on Mechanical and Electrical Properties of PA 6 Nanocomposite Fibers During the Melt Spinning Process
A Study on Relation of Morphological, Structural and Rheological Properties on Dye Uptake of PP/PBT Melt Spun Polyblend Fibers with Blend Ratio Variation
Polyaniline/polyvinylidene fluoride composite membranes for gas separation
Preparation of PLA/PVA microspheres as drug release carriers
Study on the effect of 7-hydroxycoumarin on photo-oxidative degradation of LLDPE films
FEM and Theoretical Analysis of Equivalent Stiffnesses of Trapezoidal Corrugated Composites in Different Direction of Corrugation
Investigation of Fiber Angle Effects on Pressure-Temperature Capacity of Composite Pressure Vessels
Investigation of Thermal Behavior of Trapezoidal Corrugated Composites
Stiffness Matrices Terms for Quasi-sinusoidal corrugated composite
Study of nano-reinforcing fillers effect on the lap shear strength of epoxy adhesives
Prediction of Tensile Modulus of PP/Nanoclay/CaCO3 Ternary Nanocomposite
Nonisothermal Crystallization and Melting Behavior of PP/Nanoclay/CaCO3 Ternary Nanocomposite
The effect of paraffin wax quality on physico-mechanical properties of rubber compound based on NR/BR
The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers
Modeling and Optimization of Toughness of Hybrid Polyamide 6 Nanocomposites using Artificial Neural Network and Response Surface Methodology
Tribological properties of UHMWPE/HDPE/ MWCNT nanocomposites
Polymeric membranes for industrial oily wastewater treatment
Crystallization and thermal behavior of polyamide 6/ poly(ethylene-co-1-butene)-graft-maleic anhydride/organoclay nanocomposites
Polymeric membranes for industrial oily wastewater treatment
Investigation of Rheological, Mechanical and Water Absorption Properties of LDPE-Thermoplastic Corn Starch Blends
Preparation and Properties of LDPE-Thermoplastic Corn Starch-OMMT Nanocomposites for Packaging Applications
Glass Transition and Cooperative Dynamics in PMMA/SAN/Clay Nanocomposite
Preparation and Evaluation of Polyacrylamide/Laponite Nanoparticles suspensions for Enhanced Oil Recovery Applications
Effect of Nanoclay on Steady Shear Behavior and Morphology of Polyethylene/High Impact Polystyrene blend Nanocomposites
Rheological Properties of Different Rubber Compounds:Effect of Process Oils
Pilot-scale plant investigation of blocking mechanism in oily wastewater from refinery processes treatment by polymeric membrane filtration
Investigation of elastic moduli of polypropylenereinforced with deformed single wall carbon nanotube based on FEM
Fractal Characteristics of Phase Separation Morphology
Mechanical properties of anisotropic low density rigid polyurethane/organoclay nanocomposite foam
Apparent viscosity prediction of carboxymethyl-cellulose polymer aqueous solutions using artificial neural networks and regression techniques
Morphology and Dynamic Viscoelastic Properties of PC/PBT/Nanocomposites
Characterization of severely degraded silicone composite HV insulator
The Effects of Processing Parameters and Layered Silica Nanoclay Content on Morphology of Microcellular Foam Based on PP/EPDM/Organoclay by Response Surface Methodology (RSM
Water vs. Gas Assist Injection Molding: Comparison and New Developments
Shear Rheology of Blends of a Linear and a Long Chain Branched Polypropylene
Viscoelastic Behavior of the Polyacrylamide Nanocomposite Hydrogels for Water Shut-off Applications
The Effect of Carbon Nanotube Aspect Ratio on Reinforcement Efficiency in Nanocomposites
Tensile Properties of Alkali Treated and Raw Date Palm Fiber Reinforced PP/EPDM Composites
Dynamic Analysis of Composite Drillstring with FEM
Experimental Investigation On GFRP Composites Under High And Low Velocity Impact
Effect of nano-particles geometry on the recovery of polymer nano-composites in the melt state
Study on Creep and Recovery of Water-in-Crude Oil Emulsion
New method for evaluation result of coated sheet metal panel by the impact folding tester
Rheological Study of Heavy Crude Oils and Their Emulsions
Simulation of the Crystallinity Effect on Cell Growth in Semi-Crystalline Microcellular Foams by Semi Solid-State Batch Foaming Process
Piezoresistive PP/EPDM (TPV) Thermoplastic Vulcanizate Nanocomposites Based on Nanographite / Nanoclay Hybrid
Wellbore Stability in Shale Formation: Modeling the Effects of Polymers in the Drilling Fluids Formulation
Performance of Methane Hydrate Formation In the Presence of Low-Dosage Poly (Ethylene Oxide)
Thermodynamic Investigation of the Stability of Copolymer Grafted Bentonite Nanoclays in an High Salinity Electrolyte
Preserving anti-corrosion properties of polyurethane based coatings exposed to humidity and UV-radiation using nano Titania
Simulation of hot runner system effect on injection molding process in compare with cold runner
The effect of SiC nanoparticles and nanowhiskers on tensile properties of SiC/Epoxy nanocomposites
Nanomechanical Characteristics of Photo-Cured Cyanoacrylate Bioadhesives Containing TMPTMA or POSS Nanostructures as Crosslinking Agents
Investigating the effect of polymeric foam on the penetration of projectile in the foam-filled honeycomb structures
Controlled Release of Triclosan and Its Effect on the Antibacterial Properties
The feasibility of using a novel fluid system as sand clean out for high temperature application- Experimental Study
Preparation and Properties of Tetracycline Hydrochloride Loaded Electrospun PLA/PCL Nanofibers for Wound Dressings
Physical-Mechanical Properties of Polyurethane-Polyisocyanurate Organoclay Nanocomposite Foams
Epoxy Siloxane/ Montmorillonite Nano composite , Anticorrosive and Mechanical Properties
Preparation and characterization of multi-walled carbon nanotubes/polymer blends as ultrafiltration membranes
Experimental study of drag reduction in crude oil of an Iranian oil field
Influence of increasing Rubber Concentration on mechanical and X-ray diffraction (XRD) characteristics of Dynamically Vulcanized Thermoplastic Elastomers Nanocomposites based on LLDPE/Reclaimed Rubber
The effect of compatibilizer on mechanical properties and morphology characteristic of TPV nanocomposites based on LLDPE/Reclaimed Rubber
Corrosion behavior and mechanical properties of cured epoxy_ glass flake nanocomposite coatings on galvanized steel
Electrochemical study of corrosion properties of low carbon steel in 1M HCl in the presence of novel cationic surfactant
micro-injection molding mIM:a new processing in plastic injection
Investigation of Thermal Transition and Mechanical Properties of NR/SBR Composites Filled with Carbon Blacks and MWCNT
Synthesis of polymeric beads with tunable size and porosity and their application in removal of Cr(VI)
Correlation of Morphology and Mechanical Properties of Novolac Phenolic Resin/Clay Nanocomposites Prepared via SolutionMixing Method
Effects of Different Synthesis Conditions on the Morphology of Molecularly Imprinted Nanoparticles
Solving the Undesirable Polymerization Problem in the Industrial Unit of Styrene Production
Macroscopic behavior of Polymer Foams based Micromechanics Using Finite Element Method
Macroscopic behavior of Polymer Foams based Micromechanics Using Finite Element Method
Modeling and Simulation of Generalized Newtonian and Viscoelastic Fluid Flows in Screw Turning Extruder in the Presence of Leakage Flow Using OpenFOAM Software
Simulation of composite delamination with Cohesive Zone Model
Kinetic study of polyurethane foam growth rate in order to use as a braking mechanism in a vehicle model
Effect of Surfactant on Wettability Alteration by Sol-gel Process in Gas Reservoirs Using
Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Monomers Composition and Cell Modifying Aid
Mechanical properties of alumina / polymer – based nanocomposites
Preparation and optimization of polyamide 66 nanofibers diameters by D-Optimal design method
Self cleaning effects on the glass substrates with TiO2-V thin films prepared by sol-gel method
The effect of nano-Fe2O3 particles on the corrosion performance of waterborne polyurethane coating
Production of Coaxial Cables with Extrusion Foaming using Butane as Blowing Agent
Three-Dimensional Simulation of mold filling of viscoelastic fluids using finite volume method
Manufacturing of polypropylene/silica nanocomposites using in-situ polymerization and investigation of product properties
Experimental study of wettability alteration to gas wetness using fluoroalkylsilanes in gas/condensate reservoirs
Flame retardant behavior of epoxy / glass / multi walled carbon nanotubes
Drag-reduction Effective of SBR in Horizontal Circular Pipe Setup
The effect of nanoclay (NC) type, molecular weight of PVC and varying amount of nanoclay(NC), on the mechanical and thermal properties of PVC/clay nanocomposites
Fabrication of Silica anofibers via Electrospinning/Post Thermal Treatment
Investigation on the Effect of Physical properties on Corrosion Resistance and Adhesion of Latex paints Applied on ferrous substrates
Surface Modification of Clay-PAN composite nanofibers
Study on Electrospinning of Chitosan Nanofibers
Production of spherical cellulose nano-particles from the waste cellulose fibers
Kinetics of Dextran Crosslinking by Epichlorohydrin: A Rheometry and Equilibrium Swelling Study
The effect of electrospinning time on some physical and mechanical properties of Polyurethane Electrospun nano mat
Synthesis of rigid polyurethane foam from PET wastes
Rheological, Mechanical, and Oxygen Barrier Properties of Polymer/layered Silicate Nanocomposite Films based upon PE and EVA
Morphological study of polyamide-6/silane-grafted-high density polyethylene/nanoclay ternary nanocomposites
Investigation of the effect of ultrasonic waves on physical and mechanical properties of epoxy resin
Rheological Aspects of Rotational Foam Molding
Phase Separation of Ternary Polymer-Polymer-Solvent System on Patterned Substrate
Poly (styrene-co-ethylhexylacrylate) latex with various functional groups: Mean-field model of melt intercalation for polymer/clay nanocomposites
Investigating the Effect of Surface Modification of TiO2 Nano Particles on Critical Pigment Volume Concentration
The Effects of Significant Conditions on the Dispersion of Epoxy-matrix Nanocomposites and Its Mechanical Properties
Investigation the Effect of Laser Fluence and Pulse Number on Surface Modification of Clay-Pan Composite Nanofibers
Removal of formaldehyde from liquid phase by polyacrylonitrile / TiO2 Nanofibers
Mechanical and Barrier Properties of Uniaxially Stretched Multilayer Nylon/Clay Nanocomposite Film
Preparation of Polyurethane Nanocomposites via In-situ Polymerization: Study of Mechanical and Thermal Properties
New Application of Off-grade Poly (ethylene terephthalate) via the Partial Glycolysis Method in order to Synthesize Maleated PET as a Compatiblizer for Preparing PET Nanocomposites
Quantitation of the reinforcement effect of SiAlON nanoparticles on the tribological and corrosion resistance of epoxy coating
Silylation of Organoclay (Cloisite 30B) with trifunctional 3-(trimethoxysilyl)propyl methacrylate
HTPB-Grafted Nano-Silica for Use in SBR Compounds via Solution and Melt Mixing
Effect of single walled carbon nanotube on mechanical and morphological properties of dynamically vulcanized thermoplastic elastomer based on NBR/PVC
Preparation of Nanocomposites based on NR/ BR (Cure Characteristics, Microstructure & Mechanical Properties)
Toughening Mechanism of Polymer/ Layered Silicate Nanocomposites
Preparation and Investigation of Mechanical Properties of Novel Sulfur Polymer Composite
Effect of Clay Loading on Mechanical Properties of Highly Filled Nanocomposites
Cure Kinetic Behavior of Structural Epoxy Adhesive Film by Isothermal Differential Scanning Calorimetry
Dynamic Modeling of Spinodal Decomposition Phase Separation Kinetics in Asymmetric Polymer Blends
The Critical Micelle Concentration for the Solution of PLGA/PEG Tri-block Copolymers
Comparative Study of Cohesive and Interfacial Fracture Testing of Structural Adhesive
Effect of Polymer-Clay Intercalation and Sequence of Melt Compounding on the Properties of PP/EPDM/Organomontmorillonite Nanocomposites
Synthesis and Characterization of Aqueous Processable Polyaniline (PANI)/Graphene Hybrids as Potential Source of Transparent Conductive Materials
Study of the effect of nano alumina on electrical and mechanical properties of cast epoxy composite
Experimental Investigation and Modeling of Polymer Flooding in Fractured Heavy Oil Reservoirs Using Five-Spot Micromodels and UTCHEM Software
Mechanical Properties of MWNT/Epoxy Polysulfide Nanocomposite
Influence Of Graphene-oxide Nanosheets On Die Swell Behavior And Rheological Properties Of Polyvinyl Alcohol Aqueous Solution
Effects of organically modified nanoclay on structure and mechanical properties of flexible polyurethane foams
Investigation on the Effect of Physical properties on Corrosion Resistance and Adhesion of Latex paints Applied on ferrous substrates
Elimination of Acid Yellow 36 by PPI Dendrimer-Chitosan Hybrid: Preparation, Characterization, RSM, Kinetic and Isotherm Adsorption Study
Biodegradable Chitosan/Polyethylene Glycol Fumarate Blend Films
Investigation of Parameters Effects on Electrospinning ofPoly(Ethylene Terephthalate) Nanofiber
Prediction of Glass Transition Temperatures for some Polyimides using QSPR analysis
Dispersion study of titanium dioxide into the polyurethane nanocomposite coatings
Introducing Self-cleaning Property to Acrylic Coatings using Fluorosilane Treated TiO2 Nanoparticles
Thermoregulated non-woven fabric treated with microencapsulated phase change materials suitable for smart textiles
Preparation and characterization of polyurethane foam treated with phase change material microcapsules as potential thermo-regulating textiles
Evaluation of Nanosilver as Antibacterial and Barium Sulfate as Radiopaque on Mechanical Properties of EVA Hollow Fibers
Comprehensive mechanical evaluation of carbon black/polyurethane nanocomposite coating compounded through ultrasonication method
Preparation of Epoxy Nanocomposite by Epoxy Functional Multiwall Carbon Nanotube and Study of Non-Isothermal Cure Kinetic
Preparation of Spherical and Rod Shape Nanopowder by Polymer Template
Effect of Fiber Volume Fraction on Stress Distribution in Polypropylene Composites Reinforced by Glass and Carbon Fibers
Effect of co solvent affinity with water on membrane morphology in immersion precipitation process
Preparation of Pyrrole - SWNT and Pyrrole - Thiophene Conductive Polymer Composites
Hydrophobic Cellulose via Silica Base Polymer Blends
Properties and Rheological behavior of PCC-GTR Modified Bitumen
On the Phase Inversion Phenomenon in a Feather Keratin/Nylon 6 Blend as Deduced from Atomic Force Microscopy
Improving Thickening Properties by using Novel Acrylate and Diacrylate Crosslinkers
Relationship between Cell Compatibility and Elastic Modulus of Silicone Rubber/Organoclay Nanobiocomposites
The evaluation and optimization of Impact Strength of PP/PC/SEBS Ternary Blends by Using Taguchi Methodology
SEBS-g-MAH compatibilizer precursor for PP/PC/SEBS Ternary Systems
Effect of the blending sequence on the microstructure and mechanical properties of PET/EPDM, EPDM-g-MA/organoclay ternary hybrid nanocomposites
Study on the effect of re-modification of MWCNT on the rheological properties of epoxy/CNT nanocomposites
Preparation and Investigation of Mechanical and Antibacterial Properties of Poly (ethylene terephthalate)/Chitosan Blend
Improving production temperature of polymer modified bitumen by waxy materials
Application of Silver Nanoparticles in the Reverse Osmosis Membrane
The Effect of Processing Parameters on the Thermal Conductivity of LDPE/UHMWPE Blend Foams
Thermal Degradation of HDPE/Caco3 Nanocomposites: Effect of Content of Nano and MFI
Correlation of Morphology and the Thermal-Oxidative Degradation Behavior of PET/NBR/PC Ternary Blends
Preparation and characterization of polyvinylchloride/thermoplastic polyurethane blend membranes
Preparation and Properties of NBR Nanocomposites Containing Montmorillonite
Enhancement of the Properties of BR/EPDM Compounds using Organoclay
Fabrication of a biopolymer fibrous scaffold for nerve tissue engineering
Biocompatilbility evaluation of a natural polymer-based scaffold
Effect of E-beam irradiation on crystalline-phase transition of PVDF/nanoclay nanocomposites
Preparation and characterization of PVDF magnetic nanocomposite films
Thermal Shock Cycling Effect on Flexural Properties of Phenolic Based Composites Reinforced By Basalt and Carbon Fibers
Fabrication and characterizationof polyurethane/3A°zeolite mixed matrix Membrane for gas separation
Modeling and Simulating of Straight Section of Jet Flow in Electrospinning Process: Using Non-Newtonian Behavior
Gas separation properties of the polyurethane/poly (vinyl alcohol) (PU/PVA) blend membranes with different PVA molecular weights
Metallic / Nonmetallic Photo-initiators Effects on Photo-oxidative Degradation of LDPE
Collagen nanofibers and their applications in skin tissue engineering: A Review
A Novel Modified SBA-15 Supported Catalyst Using Multidentate SNS Ligand for Atom Transfer Radical Polymerization (ATRP
Effect of Structural and Processing Condition on the Morphological and Rheological Properties of HDPE/PS Nanocomposites Reinforced with Nano-Sio2
Influence of maleated polyethylene on morphology and thermal degradation behavior of PE based nanocomposites
Study on Morphology-Rheology of Nanocomposites Based on an Immiscible Rubber Blend and Organoclay
Evaluation of Thermal Properties of Modified Acrylic Fibers Precursor for the Fabrication of Carbon Fibers
Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Molecular Weight and Particle Size Distribution
Influence of the kind of organoclay on morphology and mechanical properties of (SBR/NBR) as an immiscible rubber blend
Effect of Epoxidized Natural Rubber on Dispersion of Organoclay and Curing Behavior of NR/BR/Organoclay Nanocomposites
Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Monomer Composition and Cell Modifying Aid
Experimental and Numerical Investigation of Mixed-Mode Fracture of Polyester Resin
An Experimental Investigation on the Effect of Nitrile Butadiene Rubber (NBR) on Mechanical Properties of PVC/Wood Flour Composites
Effect of Nano Silica on Mechanical Properties of Chlorosulfonated polyethylene compounds
Effect of pistachio shell flour and coupling agent on mechanical property wood plastic composite
Synthesis and Characterization of PEGylated Magnetite Nanoparticles for Drug Delivery Applications
Study of Effect of pressure and temperature on the gas separation properties of a novel copolyimide membrane with flexible moieties
Study of Electrospinning Process: Effect of Viscosity on Morphology of Electrospun PAN/ MWNTs Nanofibers
EXINMOLD - a design support software for injection mold makers
Determining fracture toughness as a cohesive zone parameter of a wood plastic composite
On the effect of unit cell parameters in predicting the elastic response of wood particulate-polymer composites
Study on Gelatin/Ag Nanofiber for biomedical Application
Cure Kinetics of Epoxy Resin and Photoactive Aromatic Diamine Reinforced with ZnO Nano Particles
Modeling of dissolving of nano-core-shell particles in two phase viscosity prediction during polymer flooding
Microporous membrane formation via thermally induced phase separation: Effect of temperature and evaporation time on membrane morphology
Preparation of small water- soluble CdSe quantum dots by immobilization in poly (acrylic acid) grafted onto Kappa- Carrageenan
Anisotropic flat sheet membrane formation via TIPS
The effect of nanoadditives on viscoelastic parameters of bioadhesive gels composed of cellulose derivatives
The effect of different nanofillers on water uptake and gel point of polysodiumacrylate hydrogel nanocomposite
Optimization of microbial culture for production of poly hydroxy butyrate (PHB) by azotobacter beijerinckii DSMZ-1041
Thermal stability and flame retardancy of synthesized halloysite nanotubes (HNT)/ethylen propylene diene monomer (EPDM) nanocomposites
Nanocompositesbased on poly(vinyl butyral) and soft magnetic Magnetite (Fe3O4) nanoparticles – synthesis, processing and characterization
Nano membrane based Polyamide Modified by Polymer Blending Process
Effect of Dissolved CO2 on the Crystallization Behavior of PLA with Various D-contents
Effect of Hard Segment Distribution on the Foaming Behavior of Thermoplastic Polyurethane (TPU
Effects of Processing, Molecular Weight, and Inorganic Filler Type on the Rheological Properties of Linear Polylactide
Developing an Optimum Cure Cycle Using Differential Scanning Calorimetry for tetra Functional Epoxy Cured with a Cycloaliphatic Amine
Poly(ε-caprolactone diacrylate)/Polyhedral Oligomeric Silsesquioxane Hybrid Organic/Inorganic Nanocomposites: Thermal Studies
Rheological Behavior of Aqueous Polymer Solutions
Effect of blending of polymer containing carbonyl group on crystalline structure of PVDF
Interfacial and Rheological Behavior of a Partially Hydrophobic Silica Nanoparticle Suspension in Aqueous Medium
Polycaprolactone/Polyhedral Oligomeric Silsesquioxane Hybrid Organic/Inorganic Nanocomposites: Mechanical and Nanomechanical Analyses
A facile and efficient method for graphite oxide nanosheets powder preparation
Preparation of a novel pH-responsive Au nanoparticle/poly (acrylic amide) grafted onto salep composite hydrogel
Rheology of Concentrated Polystyrene Solution
Enhanced mechanical and rheological properties of EPDM/Graphite oxide nanosheets nanocomposite
Investigating Vibration Behavior of Single-Walled Carbon Nanotubes Using Finite Element Method
Effect of Concentration on Rheological Behavior of Polystyrene/Ethyl Benzene Mixtures
Nanoindentation of Isotactic Polypropylene: Correlations between Hardness, Yield Stress, and Modulus on the Local and Global Scales
Application of Grafting Method for Modification of Precipitated Silica in Rubber Compounds
Toughened Polyamide 6 Hybrid Nanocomposites: The Morphology and Permeability Relationship
Evaluating the Effect of Nanoclay on Surface Tension of High Density Poly ethylene melt using Pendant Drop Method
Shape Transition of Magnetic Field Sensitive NdFeB Filled PVA Hydrogels
Reactive Compatibilization of Polyamide-6/Polycarbonate Blends by using Maleated SEBS
Processing Considerations in the Recycling of Wood-Plastic Composites
Dynamic-Mechanical Properties of Fumed Nanosilica-SBR Composites Prepared by a New Strategy in Melt Mixing
The Effect of Mixing Procedure on Rheology and Morphology of Bitumen Modified by Polybutadiene –Nanoclay
Influence of Rubber Concentration on the Microstructure and Performance Properties of High Cis1, 4-Polybutadiene Rubber- Modified Bitumen
An Investigation of the Effects of Layered-silicate on Morphology, Permeability and Mechanical Properties of Polyethylene-based Nanocomposites
Devulcanization of Ground Tire Rubber Powder by Reactive Mixing Process; Effect of Modifier
Fabrication of Nano Silica Synthesized From Rice Husk / Epoxy Resin Nano Composites and Study of Their Mechanical properties
Nano hydrogel preparation of chitosan and diglycidyl ether compounds and study of thermal, swelling and drug releasing properties
THE INFLUENCE OF ELASTOMER CONTANT ON MORPHOLOGY, TOUGHNESS AND CHEMICAL COMPOSITION OF EPOXY/ELASTOMER COMPOUND
Biopolyemr Nanocomposites with Enhanced Photocatalytic Antimicrobial Activity and Barrier Properties Based on LDPE- nano Tio2/Organoclay Hybrid
Synthesis and characterization of soluble poly(imide-ether-imidazole)s based on trifluoromethylated aromatic diamine with fluorene pendent group
Synthesis of polyimide membrane for the separation of CO2/CH4 gases
Bending Failure Behavior of Sandwich Beams Manufactured by Vacuum Infusion Process
STUDY OF bitumen composites of POLYACRYLAMIDE USE IN asphalt industry: wide temperature range performance
Exprimental and simulation Study on the Effect of Process Parameters on the Warpage of thin-shell Injection Molded Parts
Preparation, Structure and Properties of 50/50 NR/BR Blend/ Clay Nanocomposites
Flexural Properties of Sandwich Panels with Perforated Core - Hole Number and Pattern Investigation
Polyurethane-ZnOnanocomposite membranes for gas separation
Mechanical Behavior of Non- Homogenous Cylindrical Foam under Internal and External Pressure
Preparation of Water-Soluble poly (styrene-co-(chloromethyl) styrene) in the Presence of nanoporous β-Cyclodextrin: Applicable to Remove Copper (II) from Water
Preparation of Core-Shell, Organic-inorganic, Hybrid Latexes via a New Single-step Pickering Emulsion Polymerization Method
The Synthesis of Monodisperse Nano-Porous Styrene-Divinylbenzene Copolymer Particles by Seeded Dispersion Polymerization Method
Development of Artificial neural network and neuro-fuzzy for Taguchi based erosion behavior of GF-reinforced polyester composites
Effect of Glycol Length on the Thermal Properties of Polyesters: PET, PTT, PBT Case Studies
Taguchi technique to optimize effective parameters of chitosan treatment on cotton fabric to maximize antimicrobial properties
Investigation of Constituent of PolysulfideSealant Used in Aerospace Industry and Effect of these Constituent in Shelf Life
Investigating Expert system parameters on modeling performance of release behavior from an injectable in situ forming Drug Delivery System
Modeling of Taguchi based MANFIS Method to Investigate the Performance of Batch Emulsion Polymerization of Vinyl Chloride
A study on the toughening of PVC/Starch blends by MBS core/shell particles
Application of CONNFFESSIT approach to study temperature effect on the flow behavior of dilute polymer solutions
The effect of different flow fields on particle size distribution (PSD) in suspensions using modified population balance/DEM
The Role of Nano Silica on Rheological Properties and Morphology Development of PP/PBT Blend
Effect of Carbon nanotube dispersion quality on tensile properties of polyacrylamide nanofibers
Predicting and Optimizing the physical-mechanical properties of epoxy/rubber/nano CaCO3 system using Taguchi approach, ANN and ANFIS methods
The combined effects of a polymeric compatibiliser and nanoparticles on structure development and properties of polymer blends
Nylon 6 Multi Walled Carbon nanotube electrospun nanocomposite nanofibers membrane crystallography
The Effects of Organoclay and Compatibilizer on the Oxygen Barrier Properties of HDPE-based Nanocomposites
Thermal and ablative properties of nano zirconium dioxide/phenolic resin/carbon fiber nanocomposite
Preparation of a Thermally Reversible Gelation Polymer Containing Ciprofloxacin-PLGA Nanoparticles for Local Delivery of Antibiotics
PHYSICAL AND MECHANICAL PROPERTIES OF SEBS/POLYPROPYLENE NANOCOMPOSITE REINFORCED BY NANO CaCO3
Gas Separation Performance of Polyvinylchloride - Silica Nanocoposite Polymeric Membrane
The Role of Organoclay on In-situ Microfibril Formation of Epoxy in Poly(butylene terephtalate) Nanocomposites
Separation of olefin/paraffin by Cellulose Acetate-Silica Nanocomposite Membranes
The Role of Thermodynamic Parameters and Mixing Kinetics in Determining the Morphology of Nanosilica Containing Ternary Blends: with Emphasize on Core-Shell Morphology
The Morphology and Wettability of PDLLA/Al2O3 Nanocomposite Scaffolds
Polymer Nanocomposite of Silver-Tin Dioxide Core-Shell Nanoparticles/PVA - Structural Investigation
An investigation of structural changes in modified and oxidized PAN nanofibers using different concentrations of KMnO4 solutions
Investigation of permeability and selectivity properties of polymer layer of poly (sulfone-imide-amide) to separate N2 from CH4
Influence of various surface treated nano-silica particles on the optical properties of nanocoatings
Synthesis and Characterization of silica/epoxy mutifunctional nanocomposite coatings prepared by sol-gel process
Study on the Mechanical Properties of PP/SEBS-g-MA/OMMT Nanocomposites
Interfacial tension measurement of PS/PA6 in the presence of compatibilizer by using breaking thread method
Study on the Mechano-Optical Behavior of LDPE/Ethylene Vinyl Acetate/Nanoclay Nanocomposites for Film Packaging Applications
The Effect of Clay on the Ablation Behavior of NBR/OMMT Nanocomposites
Determination of Interfacial Tension in PS/PA6/clay Nanocomposite By Using Breaking Thread Method
EFFECT OF CATIONIC SURFACTANT AND ACIDITY ON CHITOSAN NANOFIBERS
The Effects of Miscibility on the Dynamic and Uniaxial Viscosity of HDPE/LDPE Blends
Synthesis of polyimide membrane for the separation of CO2/CH4 gases
The Effect of Calcium Carbonate Nanofiller on the Morphology and Mechanical properties of Natural Rubber Nanocomposites
Uniaxial Extensional Behavior of Ziegler- atta High Density Polyethylenes
The synthesis, spectral characterization and biological properties of a novel antimicrobial dye
In situ polymerization of polystyrene in the presence of g-ABS
Study on the mechanical properties of epoxy resin based on bisphenol F (DGEBF), in the presence of nanofiller
Properties and Macromolecular Structure in Weld Interface of Pipe Grades Polyethylene
Effect of Polyol, Diisocyanate and Chain Extender of Polyurethane Membranes on Separation of Higher Hydrocarbons from Methane
Accelerated aging behavior of nano composite based on Response Surface Methods
Preparation and characterization of thiolated carboxymethyl chitosan-β-cyclodextrin nanocarriers for oral controlled delivery of hydrophobic drugs
Investigation of permeability coefficient at time of die of composite parts with honeycomb core in VARTM process as theoretical and experimental
A study on dispersion ability and stability of TiO2 nanoparticles separately modified with oleic andstearic acid
Investigation of cured shapes of trapezoidal corrugated composite skins
Investigation of the viscoelastic properties of anatase TiO2-Polypropylene nanocomposites exposed to UV irradiation
An investigation on the mechanical properties of epoxy resin bisphenol F with different curing agents via FT-IR spectroscopy
Graphitized nanodiamond based PP/EPDM TPO composites with improved tribo-dynamic properties
Axial compression tests on nanoclay epoxy-based fiber glass cylindrical shells
Fabrication and investigation of permeability and selectivity of polyaniline membrane
Rheology and Morphology of ABS/PA6 Immiscible Blends: Interpretation of rheological data with Palierne and Fractional Zener models
Optimization Mechanical properties of PC/ABS Blends Using Taguchi Method of Experimental Design
Gas permeation properties of polyurethane-TiO2 nanocomposite membranes
The Influence of Nanoclay Partitioning on Microstructural Properties and Fibrillation Process in PP/PBT/Nanoclay Blend Nanocomposite Fibers
Mechanical and Self- healing Properties of Latex Coatings Containing Ethyl Cellulose-based Core-Shell Microcapsules
Effect of Multi-Walled Carbon Nanotube on Micro-phase separation behavior of Thermoplastic Polyurethane by Means of Rheology
Effect of nanoclay surface modifier chemical reactivity on the morphology and the rheological properties of the PP/PA6 blend nanocomposite
Mold Filling Simulation in the Injection Molding Process with OpenFOAM Software
Application of Rheology on Evaluating of the Morphology of PA/PE/Clay Blend Nanocomposites
Study on Clay Dispersion in ABS/Clay Nanocomposites Using Linear Viscoelastic Properties
Investigation of mechanical properties of honeycomb composite parts made by VARTM and Hand Lay-up
Electrical Conductivity and Percolation Threshold of Hybrid Carbon Fiber-Carbon Black Polymer Composites: Experimental Study and Modeling
The effect of PEG concentration and coagulation bath composition on the morphology of microporous PSf membrane prepared via NIPS method
The effect of linear low density polyethylene (LLDPE) molecular weight on the property of microporous membrane formation via thermally induced phase separation
Impact of MEA and NaOH solutions on mechanical properties of microporous hollow fiber polymeric membranes structure
The Evolution of Nanoclay Distribution in PC/ABS/Nanoclay Blend Nanocomposites via Rheology
Fabrication of melt blended HDPE/EVA microporous flat sheet membranes via TIPS method
Linear and Non-linear Viscoelastic Properties of PE/EVA Blend Nanocomposites
Effect of the extrusion variables and chips water content on the thermal and molecular weight characteristics of nylon 6-6
Preparation of Hexene-Ethylene Copolymers by the In Situ Copolymerization of Ethylene with Chromium trimerization Catalyst and Cp2(Ind)2ZrCl2
Preparation of Antimicrobial methyl Methacrylate Polymer Nanocomposites with Surface Modification of clay
Insitu polymerization of caprolactam in presence of NBR toward super tough PA6/NBR nano alloy
Thermodynamic Parameters of Dyeing Compounded Fiber Grade PET using Hyperbranched Polymeric Additive by Disperse Blue 60
The role of nano clay surface modifier in state of dispersion and morphology development in SAN/EPDM immiscible blends
Study and Comparison of Mechanical and Morphology of Concrete Reinforced with Carbon Fiber and Concrete Reinforced with Treated MWCNTs
Polymer flooding simulation in one of the oil reservoirs in southern Iran
Gel-Polymers Applied in Oil Reservoirs Using Nano-Clay Particles
Study and Comparison of Mechanical and Morphology of Concrete Reinforced with Carbon Fiber and Concrete Reinforced with Treated MWCNTs