The Biennial International Conference on Experimental Solid Mechanics (X-Mech-2018) , بهمن ماه ۱۳۹۶

Accepted papers in The Biennial International Conference on Experimental Solid Mechanics (X-Mech-2018)

• Reliability Design of the Hinge Kit System (HKS)in a CommercialRefrigerator Subjected to Repetitive Impact Loading

• Utilization of Acoustic Emission Phenomenon and Its Applications in Mechanical Engineering

• Utilization of the Most Recent Techniques Developed by Non- Destructive Methods for the Aerospace Industry

• Utilization of Advanced Prognostic Methods for Gas Turbine

• Physiotherapy Treatment Effects on Ground Reaction Force and Toeout Angles: A Case Study

• Experimental evaluation of impact strength of cementitious composite by partially replacement cement with Fly Ash class F

• Effects of randomly distributed discrete short PVA fibers on impact strength of cement based composite

• Numerical and experimental analysis of delamination of Nomex honeycomb core from the Carbon/Epoxy facesheet in a sandwich structure

• Mechanical Properties of Balsa Cored Sandwich Structures with Glass/Epoxy and Fiber Metal Laminate Skins: A Comparative Study

• Durability Characteristics of Novel Fiber Metal Laminates for Marine Applications in Moist and Salty Environments

• Experimental Study on Mechanical Behavior of Liquid Nitrogen Conditioned Fiber Metal Laminates as Potential Cryogenic Materials

• Investigating Compression Properties of Healed Sandwich Structure via Epoxy and TETA Microcapsules

• On the mechanical behavior of nano-calcium carbonate reinforced epoxy/carbon fiber laminates

• Using the Failure Assessment Diagram Method to Evaluate Fracture Resistance of E7010-P1 Cellulosic Welding Electrodes

• Two Fatigue Damage Models to Predict Life in SS304 and Al7050 Alloys undergoing Multiaxial Irregular Loading Spectra

• Point to Point Path Planning of Railed Base Dual Arm Manipulators with Obstacles in Their Workspace

• Numerical Investigation of Nose Sharp Changes in Ice Projectile with Conical Shape

• Bogie Design for Freight Wagons with 25 ton Axle Load

• Studying the Effects of Ultrasonic Vibration on Microstructure and Hardness of St14 Steel Sheet

• An experimental investigation on the visco-elastic behavior of PP/ASF/CaCO3 hybrid nano-composites

• Fatigue Life Prediction of Steel Alloys under Uniaxial Random Loading using Stress-Based Approach

• Strain-Based Damage Models to evaluate Fatigue Life of Steel Alloys Under Uniaxial Variable Loading

• Performance comparison of steel and composite pipelines under fault displacement

• Investigation of matrix cracking formation in composite laminates under the bending loading

• High velocity impact response of rubber panel

• Numerical study of Impact on a panel made of hyperelastic rubber

• A Novel Method to Obtain Material Properties through Knoop Indentation

• Extracting Jc Based Upon  Factor; a Challenge for Single Specimen Testing of Elastomers

• Mixed Elastic Variational Formulation of Composite Plates Based on Dimension Reduction Method

• Fatigue Damage Evolution of Notched Composite Multilayered Structures under Tensile Loads

• Investigation of a Modified Stamping Process for Fabrication of PEMFC Metallic Bipolar Plates with Cascaded Flow Field

• Quantitative Study of Contact Pressure Distribution over the Active Area of PEM Fuel Cell s MEA

• Study of the Residual Stress Effect of Welding Process on the Life Estimation of Submarine

• Measurement of the mode I delamination fracture toughness of composite materials based on the J-integral approach

• Experimental analysis of delamination on mode III in composite materials and effects of adding nanoparticles on energy release rate

• Design of a Pulsed Eddy Current Sensor for Characterization of Sub-surface Defects in Ferromagnetic Steels

• Effect of encapsulated linseed oil agglomeration on the flexural behavior of epoxy/microcapsules composites

• Experimental evaluation of Revolute-Prismatic joints manipulator with flexible links modeled by recursive Gibbs-Appell formulation

• Investigation the effect of aging time and quenching on the surface residual stress of Al-Cu-Li 2198 alloy

• Kinematic Singularity Analysis And Verification Of Hexapod Machine Tool

• Effect of Extrusion Ratios on Microstructure, Microhardness and Corrosion Behavior of Magnesium/Hydroxyapatite Bio-composites

• Effect of Hot-Forging process on Microstructure and Microhardness of AZ31/Al2O3 Nanocomposites

• The effects of geometric parameters under small and large deformations on dissipative performance of shape memory alloyhelical springs

• Investigation of in-plane shear behavior of multi-layer woven and weft knitted fabric reinforced composites

• Tensile properties of multi-layer woven and weft knitted fabric reinforced composites

• Investigation of compressive properties of multi-layer fabric reinforced composites

• Comparison Different Ankle Foot Orthotic for Drop Foot Caused by Spine injury

• Effect of Sheet Thickness on the Static Strength and Fatigue Behavior of the Friction Stir Spot Weld of Al 6061-T6 Alloy

• Lateral Control of Long Combination Vehicle by Active Braking Control of Converter Dolly

• Characterization of biodegradable PLA and carbon fiber reinforced PLA produced by 3D printers

• Mechanical properties of epoxy composites filled with silane modified graphene nanoplatelets

• Synthesis and Investigation of the crack growth in SCB-shaped nanocrystalline forsterite samples under mode-I and mode-II loading

• Investigation and Presentation of a Non-destructive Test Method in Electrofusion joints of Polyethylene Gas Piping for City Gas Network

• Finite Element Analysis of Thermo-Mechanical Vibration and Instability of Double Wall Boron Nitride Nanotubes Conveying Fluid Resting On Viscoelastic Medium Using Nonlocal Elasticity Theory

• Finite Element Analysis of Thermo-Mechanical Vibration and Instability of Single Wall Boron Nitrid Nano Tube Conveying Fluid Embedded In an Elastic Medium Using Nonlocal Elasticity Theory

• Modeling and Control of an Upper Limb Rehabilitation Robot

• Investigation on maximum aggregate size effects on damage pattern and ballistic limit velocity of cementitious composite subjected toimpact loading

• Influence of fiber ratio of composite materials on mode III delamination in ECT specimens

• Center of Mass State Estimation for a 2 DoF Mechanism Based on Sensor Data Fusion

• The Simultaneous Effect of Graphene and XNBR on the Tensile Properties of Epoxy

• The Effect of GnPs and Curing Condition on the Flexural Properties of Epoxy/XNBR Composite

• Fault Detection in Centrifugal Pumps using Fuzzy Logic and Artificial Immune Network

• Kinematic Modeling of a Two-link Robot with Flexible Arms

• Modified BESO Topology Optimization Algorithm for Fundamental Frequency Considering Geometrical Symmetry Constraint

• Brittle fracture of PMMA under combination of in-plane and out-ofplane shear loading

• Free vibration of a Timoshenko Hybrid composite beam considering the Rayleigh–Ritz method

• The effect of hydrostatic test simulation on the formation of stress in three-layer of polyethylene layers of gas transmission lines

• Investigation of mixed mode fracture in cracked Brazilian disk specimen under compressive mode I loading

• An experimental crashworthiness investigation of aluminum 6061-T6 tube under axial compression

• Impact Behavior of Aluminum Composite Laminates: Architectural Lamination and Interfacial Bonding

• Influence of Mesoporous Silica Nanoparticles on the Mechanical Properties of Polypropylene: Experimental Studies and Simulations

• Influence of Short Glass Fiber Particles Addition on the Vibration Properties of Polypropylene

• Effect of Different Production Temperatures on the Mechanical and Morphological Properties of Polypropylene Foam

• Effect of Carburizing Process on Fatigue Life

• Fracture Modes in Resistance Spot Welding of AISI 316 Stainless Steel Sheets

• Fatigue investigation of Metallic Diaphragm in Sonic Soot Blower

• Brittle Fracture of Metallic Diaphragm in Sonic Soot Blower

• Low velocity impact properties of basalt/Jute fibers hybrid composites

• Passive Vibration Suppression of Rotating Plates Using Piezoelectric Patches

• Barrier and Mechanical Properties of PVA Films Reinforced by Nano TiO2

• Optimum Investigation of Suspension Parameters for Dynamic Performance Improvement of an Off-Road Vehicle

• Design of composite cross arm based on the experimental results obtained from the 5% lower exclusion limit

• Low velocity impact response on Nano-FG plate

• Investigation of dimensional accuracy in spinning process using experimental work and FE simulation

• A Survey of Linear Guideway Vibrational Behavior

• Parametric study of single and multi-bolted joints in composite structures

• Low velocity impact properties of sandwich panels with FML face sheets

• Experimental Investigation on Flexural Properties of Sandwich Panels with FML Face Sheets Reinforced by SMA wires

• Comprehensive Monte-Carlo Simulator for Industrial X- ray Radiography in Non-destructive Testing

• High strain rate study of OFHC copper by experiments and simulations

• Study the effect of friction stir processing on microstructure and mechanical properties of Ti-6Al-4v

• The Effect of Fiber Content on Cohesive Properties of Fiber Reinforced Cemented Sands

• An Investigation of Mechanical and Thermal Properties of Graphene/ FBE Coatings

• Suppressing Vibration of Flexible Beam by Adaptive Sliding Mode and Back-stepping Control Systems

• Non-destructive testing of large area aluminum plate using stroboscopic shearography

• 3D Positioning of Defects by Ultrasonic Time-of-Flight Diffraction (ToFD)

• Bench mark equations for Transverse vibration of Timoshenko beams

• Fatigue Life Prediction of Notched Specimens Using a new model in the framework of Entropy Generation Theory

• Classification of human brain EEG signals for orientation detection in visual stimulus

• Design and Prototyping a Novel 3D Passive Biped Walker with Compliant Ankle and Flat Foot

• Thermal and electrical contact conductance measurement in resistance spot welding of magnesium alloy sheets

• A novel model to predict the stiffness of single-lap multi-bolt composite joints

• A dynamic micromechanical constitutive model topredict the mechanical behavior of glass/epoxy composites

• An investigation on the safe slitting interval in measuring the residual stresses

• Investigation on the effect of acid etching duration on adhesive bonding of E-glass/Epoxy composites to polyethylene

• The effect of interface fiber angle on the delamination growth of DCB specimens made of woven fabric composites

• A new thermoplastic composite made of knittedglass/ polypropylene

• An experimental-theoretical model to predict mechanical behavior of single-lap bolted composite joints

• Measurement of residual stresses in laminated polymer composites using the digital image correlation and incremental hole drilling methods

• Investigation of Composites-Metal Joints in Repaired Oil Storage Tanks

• Loading Rate Effects on the Fracture Toughness of Unidirectional Laminated Composites under mode I Loading

• Sensitivity-based finite element model updating of fiberglass/foam core sandwich panel with natural frequencies

• Effects of seashell powder as a bio-filler on mechanical properties of seashell/epoxy composites

• Evaluation of non-linear Effects in Piezoresistive PDMS/MWCNT Sensing Elements

• Design and Fabrication of a New Robot Finger

• Epoxy Resins under Repeated Hygrothermal Conditions

• Utilization of metal additive manufacturing (AM) in precision oriented mechanical part production

• Dominant Environment Approach in Thin Film-Substrate Systems: Mechanical Behavior of a Coated Cylinder

• Wrinkling of a Thin Film-Substrate with Non-Uniform Thickness

• Simulation of fluid-structure interaction in a smallscale wind turbine composite blade

• Using functionalized nano-alumina for improving the flexural properties of E-glass chopped strand mat/epoxy composites

• Maximum Yield Tensile Stress Evaluation for Investigating the High Cycle Fatigue Loading of Stainless Steel 316L: Experimental andNumerical Study

• The Automotive Aerodynamics Influenced By Active Airfoil-Shaped Rear Wing

• Experimental investigation of cutting tool geometry effect on residual stress in turning of St316

• Wettability behavior studies of ZnO-NiO composite nanostructures fabricating on the stainless steel meshes

• One-step synthesis of the nanostructured ZnO/CuO composite with highly hydrophobic properties

• Influence of the E-coating process on the mechanical properties of aluminum welds

• Experimental Investigation of Sheet Metals Bond Strength Produced By Cold Roll Bonding Method (CRB)

• A Comparison between Acoustic Emission Approach and Vibration Analysis in Detection of Failure Mechanisms in Carbon/EpoxyComposites

• Energy-based low-cycle fatigue lifetime prediction models of gray and nodular cast irons for engine exhaust manifold applications

• Scatter-band and Reliability Analysis on High-cycle Fatigue Behavior of Bovine Compact Bones

• Experimental Investigation on Flexural Behavior of Concrete Slabs Reinforced With Prefabricated GFRP Grating

• Tensile characterization of composite adobe specimens reinforced with short fibers, an experimental study

• Employing Flaws Caused by FSP to Fabricate Miniaturized Channels

• An Analytical and Experimental Investigation on Scaling of Flange Couplings