The Biennial International Conference on Experimental Solid Mechanics (X-Mech-2020), بهمن ماه ۱۳۹۸

Accepted papers in The Biennial International Conference on Experimental Solid Mechanics (X-Mech-2020)

• Mathematical Modeling of Unequal Rivets’ Shearing Load Distribution

• A Novel Surface Nanocomposite of Carbon Nanotube/Poly Ether Ether Ketone Fabrication via Friction Stir Processing for Orthopedic and Dental Application

• Experimental Study of Low-velocity Impact on Polyurethane Foam Core Sandwich Panels Reinforced by Steel Wire

• Experimental Investigation of GFRP Reinforced Concrete Tensile Strength Using Brazilian Test Method

• Mechanical Crystallization of Fe-Ti Alloy during Ball Milling

• Phase Analysis of Mg-Si-Ni In-situ Composites

• Kinetics Study on Size and Morphology of KTP Nanoparticles Synthesized by Co-precipitation Method Using PVA as Capping Agent

• Experimental and Numerical Study on Impact Resistance of Aluminum-Copper Cladded Sheets

• Experimental and Numerical Study on Fracture in Notched Functionally Graded Metallic Biomaterials

• Experimental Study on the Fatigue Behavior of Conventional and Severe Shot Peened Molybdenum Alloy Steel

• Investigation of Mechanical Properties of PMMA Cement Impregnated with Ciprofloxacin and Vancomycin

• Microstructure and Phase Formation in the Mg-Zn-Ca-RE Magnesium Alloys

• In-plane Fracture Assessment of Cracked Bone Cements by means of the Generalized Strain Energy Density Criterion

• Geometric Simulation of Surface Topography in Unstable Boring Process Using 3D ACIS Modeler

• Torsion of a Thin Film Coated Shaft Using FEM

• Tensile Characteristics of Through-the-thickness Stitched E-Glass/Epoxy Composite

• Buckling Enhancement of E-Glass/Epoxy Composite Laminates by Through-the-thickness Stitches

• Experimental and Numerical Analysis on Compression Behavior of Smart Composite Sandwich Panel with Cor1gated Core

• Experimental and Numerical Analysis on Compression Properties of Corrugated Core Composite Sandwich Panel

• Experimental Investigation on Compression Properties of Hollow Composite Cylinder Reinforced by Glass Fiber and Shape Memory Alloy Wire

• Tribology Investigation on Aluminum Sheets for Forming Applications

• Effect of Heat-treatment on Microstructure and Mechanical Properties of an Automotive Body Steel

• Effect of Post Weld Heat Treatment on Tensile Behavior of Al 2024-T8 Friction Stir Welded at Different Rotational Speed

• Experimental Analysis of Effect of Shape Memory Alloy Wires on High-velocity Impact Response of Corrugated Core Composite Sandwich Panel

• An Experimental Study of the Internal Space of Hand in Strength-grip Position for the Ergonomic Design of Hand Tools

• Effect of Probe Indentation Depth on Mechanical Behavior of Friction Stir Spot Weld of Al 6061-T6

• Troubleshooting Mill Fan in Kerman Cement Company by Vibration Analysis Method(Case Study)

• Effect of Loading Rate on the Adhesive Bonding of E-glass/Epoxy Composites to Polyethylene: Experimental Approach

• Viscoelastic Behavior of SMA Reinforced Polymers

• Adhesion Improvement of Silicone Rubber Coatings to Ceramics

• Using Shape Memory Alloys to Improve the Fatigue Performance of Polymeric Laminated Composite Materials: Modeling Philosophy

• Hydrophobicity Improvement of Cycloaliphatic Epoxy-based Nanocomposite Coatings

• Optimization of Mechanical and Self-Healing Properties of Thermally Reversible Self-Healing Polymer Composites

• Effect of Acid and Thermal Aging on the Mechanical Properties of E-glass Fibers

• Computational Study for the Characterization of Fiber-metal Laminates Using Lamb Wave Propagation

• Assessment of the Effect of Carbon Nanofibers on Matrix Cracking in Laminated Composites Using Lamb Wave Propagation

• Importance of Grain Growth during Intercritical Anneal of Advanced High-strength Dual-phase Steels

• The Effect of Raster Orientation on the Mode I Fracture Toughness of Additively Manufactured PC Specimens Printed in the Out-of-plane Direction

• Effects of Extension Rate on Mechanical Behaviors of PMMA

• Estimation of Mechanical Properties in Non-homogeneous Body Using Surface Displacement Measurements

• Image Based Micromechanical Method for Simulation of Damage Zone

• Experimental Investigation on Stacking Sequence of Glass Fiber Composite Tubes under Quasi-static Axial Compression

• Biomechanical Analysis of the Effect of Temperature and Humidity on Intervertebral Segments under Impact Load

• Study on Fatigue Life of Engine-Exhaust Pipe Flexible Couplings

• Sensory Configuration of Stewart Platform-A Numerical Study

• Evaluating the Accuracy and Reliability of Digital Image Correlation in One-dimensional Rigid Displacement

• Deflection Study of Circular Auxetic Thin Plate Under Static Loading

• Experimental and Numerical Investigation of the Ability of New Material from Aluminum Casting on Pumice Particles to Reduce Shock Wave

• Laser Measurement Technique in Split Hopkinson Pressure Bar

• Numerical Simulation of Grooved Heat Pipe Deformation by Extrusion Process

• Fatigue Finite Element Analysis of a Notched 8630 Alloy Steel Sample under Cyclic Axial Loading

• Identification of Non-linear Vibrating Systems based on Instantaneous Frequencies and Amplitudes of Dynamic Response

• Sensitivity Analysis of Continuum Damage Parameters on Error and Scatter-band for Predicted Low-cycle Fatigue Lifetime of AZ61A Magnesium Alloy

• Evaluation of Flexural Properties of Auxetic Core Sandwich Beams under Three Point Bending Test

• Small Wind Turbine Propeller: A Special Design and Manufacture Issue for Optimal Renewable Energy Production

• Disc Brake Analysis and Design: Improve the Thermal Performance Based on Test and Simulation

• The Effect of Silane on the Curing Characteristics and Mechanical Properties of Natural rubber/Nanoclay/Calcium Carbonate Nanocomposite

• Influence of Fiber Twisting Angle on the Fracture of Layers of Multilayer Composite Pressure Vessels

• Effect of Thickness and Number of Layers on the Failure of Multilayer Composite Pressure Vessels

• Analysis and Optimization of Training Structure Called Car Lifter Lever

• Initial Stability Analysis of Spine Pedicular Screws Using Modal Analysis Method

• Improvement of welding tubes using magnetically impelled arc butt welding (MIABW) machine

• Effect of Fluid Level on Thermal Buckling Behavior of Different Reinforced Water Storage Tanks Adjacent to Pool Fire

• Effect of Prolonged Bed-rest on Thigh Muscle Atrophy

• Mechanical Behavior of Natural Sheepskin Leather in Tension

• Recognition of Optic Disk by Utilization of Histogram of Gradients

• Feature Selection in Milling Process Utilizing Wavelet Analysis

• Identification of the Optimum Level of Wavelet Decomposition for Acoustic Emission Signal Denoising of a Milling Machine

• Quasi-static Axial Compression of Eccentric Thin-walled Aluminum Tubes

• Experimental Analysis on Tensile Properties of Smart Sandwich Panels with FML Face Sheets Reinforced by SMA Wires

• Experimental Investigation of Short-term Creep Behavior of Carbon/epoxy Unidirectional Laminates

• Experimental Study of the Low-Velocity Impact (LVI) on CFRP Composite

• Modeling of Delamination in Composite Laminates under Fatigue Loading

• Experimental Study of Deformation and Failure Mechanisms in Unidirectional Fiber-reinforced Polymers

• Effect of SMA Short Strips on Mechanical Properties of Adhesive joints For Joining Fiber Metal Laminate to Steel Subjected to Tensile loads

• Experimental Study on Reducing Wear Damage of Gas Turbine Combustor Components Using Hardface Coatings at Elevated Temperatures

• Experimental Evaluation of the Effect of Surface Roughness on Wear Damage of Gas Turbine Combustor Components

• Uniaxial Tensile Behavior of Steel 1.4835 at Ambient and Elevated Temperatures

• Experimental Investigation of Oxidation Rate of Thermal Barrier Coating for a Gas Turbine Combustion Chamber

• Experimental Investigation of Axial Forces in Centrifugal Compressors Based on API617

• Introducing a New Mechanism as a Breakwater and Energy Harvester

• A Novel Mechanism that Harvests Energy via Ideal Hydraulic PTO Units

• On the Interlaminar Shear Strength of Basalt Fiber/Epoxy Composite Filled with Nano-ZrO2/Graphene Oxide Nanohybrid

• Effect of CaCO3 Nanoparticles on the Flexural Properties of E-glass Chopped Strand Mat/Epoxy Composites

• Experimental Investigation of Mechanical Properties of Al/Mg Composite Sheets Manufactured by Roll Bonding

• Effect of Nano-particle Dispersion Methods on Mechanical Behavior of Al-GFRP Bonded Joints under Bending Moment

• Designing and Manufacturing of a ۳D-printed, Open-source Acrylonitrile Butadiene Styrene Dynamic Splint for Rehabilitation of Fingers Flexor Tendon Injury

• Analysis of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Dynamic Splint for Rehabilitation of Fingers and Hands by Finite Element Method

• Effect of Moisture on Mechanical Properties FML Composite (GLARE) Based on Experimental and FEM Simulation

• The Effect of Thermal Spray Parameters on the Tensile and Temperature of the Coated Equipment

• Investigation of Nonlinear Torsional Oscillations on Functionally Graded Nanorod

• Investigating the Effects of Aerodynamic Force Model on the Response of a Galloping PZT Energy Harvester

• Effect of Hydroxyapatite Sub-micron Particles on Microhardness and Corrosion Behavior of Mg-3Zn Magnesium Alloy