The 8th International Conference on Composites: Characterization, Fabrication and Application, آذر ماه ۱۴۰۱

Accepted papers in The 8th International Conference on Composites: Characterization, Fabrication and Application

• Prediction of damage in composite bolted joints under creep loading

• Developing a micromechanical model to predict the elastic properties of plain weave composites

• Influence of GNPs debonding on mode I fracture toughness of polymeric nanocomposites

• Effect of woven fabrics harness on the dynamic tensile mechanical properties of woven fabric composites

• Assessment of the effect of matrix cracking density in GFRPs on the time response of surface-mounted FBG sensors under Lamb wave propagation

• On the optimum RVE size of the aligned-short fiber composites with random distribution

• Theoretical prediction of equivalent stiffness of anode and cathode coatings in lithium-ion batteries

• An overall Analysis of a Composite Sewer Manhole Cover

• Investigation on the application of restrained recovery of prestrained SMA wires embedded in self-healing composites

• Introduction and applications of shape memory alloy

• Fatigue modeling of laminated composites using new strain-based failure criteria

• Comparing UAV composite wing stress analysis with one-way and two-way coupled fluid-solid interaction methods

• Modeling, analysis, and fabrication of a composite propeller of an ultralight aircraft

• Residual strain measurement of polymeric composite materials using the FBG sensor

• Detection of delamination damage in cross-ply laminated composites by wave propagation and machine learning, Numerical and experimental investigations

• Analytical modeling of creep phenomenon of epoxy polymer reinforced with SMA

• An investigation of the mechanical properties of synthetic leather made of PVC with organic and inorganic pigments

• Simulation of solidification process of in-situ ۶۰۶۱ alloy metal matrix composite

• Weld nugget zone composite of Al ۱۰۶۰-Copper subjected to uniaxial fatigue loading cycles

• On the Mixed Mode I/II/III Translaminar Fracture Toughness of E-glass/Epoxy Laminated Composites

• Effect of printing parameters on the tensile properties of ۳D-printed PLA material

• Effect of short natural fibers length and weight fraction on the mode I fracture toughness of epoxy-based composites

• Effect of Nano/Micro Reinforcement Type on Mechanical and Physical Response of Polyurethane based Micro-nanocomposites

• Performance of rotary jet melt spun polypropylene fiber reinforced polyester composites

• Investigating the effect of PVC and nanoclay on impact ability and mechanical properties of polyester nanocomposites

• Modeling and analysis of thermoplastic composite pipe under tensile loading

• CeO۲ nanocubes@TiO۲ core-shell nanocomposite: Synthesis, structural and morphological characterization

• Influence of initial crack length on mode III delamination in composite materials by MSCB method

• Fabrication and characterization of ZnO quantum dots heterojunction structures for photocatalytic treatment ofpharmaceutical wastewater

• Finding transient angle in tension for unidirectional composites

• Mass-specific flexural properties of a mycelium-based biocomposite

• Effect of pre-pressure on compressive behavior of a natural biocomposite

• Glass/Epoxy laminates with Novel Core Layers Under Quasi-Static Indentation: A Comparative Experimental and Numerical Study on Using Chopped Natural and Synthetic Fibers as a Core Layer

• Damage Mechanism of Glass/Epoxy Laminates with a Novel Core Layer under Quasi-Static Indentation: A Comparative Study on Using Kenaf, Glass, and their Hybrids as Laminate Skins

• Prediction of impact and fatigue life behavior of FML by finite element and mathematical simulation

• Hydrothermal growth of CuCo۲O۴ spinel nanoparticles on TiO۲ nanosheets for photocatalytic degradation of tetracycline

• The effect of different solvents on the dispersion quality of MWCNTFe۳O۴ hybrid nanofillers in nanocomposites

• Experimental and numerical investigation of the strain energy release rate of composite adhesively bonded joints under mode II loading

• An abaqus plugin for homogenization of woven composite fabric

• An analytical solution for nonlinear static bending of a functionally graded Timoshenko beam

• ۴D printing utilizing bending thermal deformation of ۳D printed PLA specimens

• Effect of nozzle temperature on the mechanical properties of FDM ۳D-printed PLA materials

• Prediction of mechanical properties of Al-C nanocomposite: a machine learning approach

• A deep learning approach to estimate the contact force of a fiber metal laminate: a finite element analysis

• Composite lithium-ion battery panels to be used as electric and hybrid car bodies

• Numerical modeling for thermographic inspection of subsurface defects in fiber-reinforced polymer composites

• The influence of annealing heat treatment on the interface evolution of Al ۱۰۵۰/Mg AZ۳۱B bilayer sheet

• The Effect of Water Immersion Ageing on Low and High-Velocity Impact Behavior of Marine Sandwich Panels with Different Skins

• Investigating the Effect of Fiber and Core Type on the Bending and Buckling Behavior of Bio-Based/Green Sandwich Structures

• Investigating the Effect of Fabric Surface Texture in the Tensile Properties of Hemp/PLA Bio-Composites

• Effect of sewing on the strength of foamy core composite sandwich panels

• A magnetic nanocomposite based on gelatin-chitosan hydrogel containing Zinc chromite as a novel nanostructure for water treatment

• Study of a composite thermal fin performance with uncertain parameters

• Dielectric Characterization of Polymer Composite Materials for Antenna Radome Applications

• Investigating the Biological Properties of Metal Nanocomposite Synthesized with Alhagi Plant extract

• Iron and Magnesium Nanoparticles Adorned on Mesoporous Zeolites: Investigation of Nanocomposite Catalytic Properties

• Study the effects of reinforcing elements on the flank wear when milling Al۵۲۰-MMC

• An investigation into the fabrication of reinforced Al-MMC with the stir-casting process

• Definition of Transition Time in Machining Titanium Metal Matrix Composites (Ti-MMCs)

• A proposal for a composite hand cane using the analytical solution and numerical simulation of coaxial orthotropic cylinder

• In-situ Synthesized nanocomposite Containing Copper/Silver Nanoparticles with Red Cabbage extract

• Surface Functionalization of Di-Nuclear Schiff base with Ag and Ni Nanoparticles as a Novel Bio-nanocomposite

• The effect of chitosan/silk film loaded with Anti-inflammatory, Antibiotic, and Angiogenic drugs in chronic wound healing

• Investigating effect of nanofillers alignment on conductivity of polymer/CNT nanocomposites

• Effects of Shot-peening on the mechanical properties of extruded Mg/۲.۵%HA biocomposite

• Wear Behavior and Microstructure Characteristics of A۳۵۶/ZrO۲+Al۲O۳ Hybrid Composite

• Effect of interlayer dry area extent and interlaminar delamination on the tensile strength of composite plates manufactured by vacuum infusionprocess

• The effect of the presence of bubbles inside resin on the tensile strength of composites manufactured by vacuum infusion process

• Magnetic gelatin-chitosan hydrogel incorporated with graphene oxide as an effective nanocomposite for methylene blue adsorption

• Mechanical response of honeycomb and chiral metastructures under axial compression loading

• Piezoelectric Effects of Bone Scaffolds of Poly (L-lactic Acid) and Gelatin with Carbon Nanotubes

• Numerical permeability measurements of a woven fabric preform for different clear-fluid and porous medium interface conditions

• Improvement of the electrochemical behavior of polymer electrolyte using covalent organic frameworks nanofiller

• Evaluating the effect of standing waves on morphological properties of spinodal topologies

• Investigation of thermal behavior of epoxy coatings containing surface-modified hollow glass microspheres

• Toughened Biodegradable PLA: Comparison Between the Mechanical Performance of EPDM and PBR

• Simulation of mixed-mode I/II delamination growth in laminated composites considering fracture process zone

• Numerical analysis of face material effect on the bending behavior of honeycomb sandwich structure

• Reuse of thermosetting polymer matrix composites reinforced with glass fibers as filler in epoxy flooring

• The effect of water absorption on the shear properties of glass-Epoxy laminates include woven fabric with different areal density

• Comparison of first-order and higher-order basic theories in calculating critical buckling load of marine sandwich panels

• Numerical analysis of vibration behavior of sandwich composite structure with three different types of core

• Developing an Empirical Model for Predicting Short Fibers Alignment Angle

• Fabrication of metal matrix composite on A۵۱۶ steel and investigation the effect of powder composition on microhardness

• Effect of Friction stir process (FSP) and surface compositing on tribological properties of pure copper

• Analysis and optimization of stacking sequence of thin-walled composite pressure vessel using finite element