The 9th International Conference on Composites: Characterization, Fabrication and Application, آذر ماه ۱۴۰۳

Accepted papers in The 9th International Conference on Composites: Characterization, Fabrication and Application

• Investigation detachment of ۲۰۲۴-T۳ Aluminum Alloy plates bonded by cohesive elements and cohesive surfaces

• Core-shell CoFe۲O۴-ZnO nanocomposite for electromagnetic wave absorption application

• The influence of tin addition on the microstructure and properties of ZrO۲-Al۲O۳ reinforced aluminum composites

• Mechanical properties of epoxy-based nanocomposite reinforced with Al۲O۳ nanorods

• Experimental Study of Tensile Properties of ۳D-Printed Titanium-Reinforced ABS

• A New Mixed Mode I/II Fracture Criterion for Arbitrary Cracks in Orthotropic Materials Considering Fracture Process Zone Effects

• Tailored Plasmonic Microspheres: Fabrication, Characterization and Harvesting Visible Light for Photocatalytic Removal of Organic Pollutants

• Next-Generation of Photocatalytic Antibacterial Nanocomposite: Cutting-Edge Strategy for Effective Inactivation of Pathogenic Bacteria

• Production of Ultra-pure Lithium Hydroxide, A Widely Used Material in The Production of Lithium-ion Batteries, Lithium Composites and Completing the Chain of Lithium Compounds from Its Halide Salt by Membrane Electrolysis method

• Investigating the orientation of short carbon fibers on the surface hydrophobicity by using flocking electrostatic method

• Chemi-resistive Behavior of Polyaniline/anatase TiO۲ Nanocomposite: Application in Sensing Devices

• Corrosion Behavior of Nano- and Micro-Composite Materials

• Investigating the microstructure and hardness coating of HA on Mg-Zn alloy by sol-gel method

• Effects of aging on compressive properties of a multilayered hybrid cored-sandwich panel stiffened by composite grid structure

• Comparative study of the flexural properties of fiber-metal laminates subjected to extreme freeze-thaw cycles

• Simulation of layup effects on the residual stresses of layered composite structures caused by the curing process

• Nonlinear Vibration Analysis of Simply Supported Euler-Bernoulli FGM beam under forced excitation

• A Numerical Investigation into the Crashworthiness of Bio-Inspired Aluminum/CFRP Tubes Under Lateral Loading

• Bio-Inspired Hybrid Energy Absorbers: Enhancing Crashworthi-ness and Weight Efficiency in Vehicles

• An experimental study on fracture assessment of rigid nanocomposite foams weakened by a crack

• Synthesis and characterization of spinel-based catalyst for sonocatalytic removal of ciprofloxacin antibiotics

• Effect of aluminum hydroxide/epoxy coating on the flammability indexes of cotton/epoxy laminated composites

• Environmentally-Friendly Strategies for Tailoring Interfacial Adhesion and Performance of All-green Biocomposites Based on Thermoplastic Starch/Kenaf Fiber

• Extrusion Foaming of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) in the Presence of Spherical Nanosilica and Reactive Compatibilizer

• Enhancing Polyamide ۶ and ۶.۶ Properties with Nanofillers: A Study on Graphene, CNTs, Carbon Fibers, and Titanium Dioxide- Short Review

• Sonochemical Synthesis of Copper Ferrite-Chitosan Nanocomposites for Electrochemical Sensing and Biomedical Applications – Short Review

• Synthesis of Cellulose Hydrogels for Drug Delivery Applications: Short Review

• Enhancing ۳D Printed PLA Filaments with Nanoclay: Impact on Thermal Stability and Mechanical Performance

• Nanoclay-Reinforced PLA/TPU Blends: A Study on Mechanical, Thermal, and Morphological Improvements- Short Review

• Modeling the impact of flame retardants on burning behavior of ۳d printed polymer chair

• Analysis of delamination propagation in open-hole GFRP composite under ۳ point-bending fatigue loading

• A magnetic nanocomposite based on graphene oxide nanosheets and Zn-Fe layered double hydroxide as a highly efficient adsorbent for the removal of dye from aqueous environment

• Melting of Holey Boron - Nitride nanosheet using molecular dy-namics simulation

• Development of Lightweight PP/Talc Composites Reinforced with Hollow Glass Microspheres

• Preparation and properties of biodegradable PBAT/CaCO۳ composite modified with chain extender

• Extruded Poly(lactic acid)/Nanoclay Films Toughened with Ethylene-Vinyl Acetate Copolymer: Effects of Nanoclay Type and loading on Film Properties

• Polymorphism-Driven Performance Enhancement in Lightweight Polypropylene Composites

• Green Bead Foams of Poly(lactic acid) in Thermoplastic Starch Matrix Reinforced with Expanded Graphite

• Improved mechanical properties of epoxy composite via modified and functionalized Short Carbon Fibers by LT۵۶۰

• Optimization of Antisymmetric Angle-ply composite laminates under transvers and thermal loads

• Study of corrosion rate of Co-CeO۲ composite for SOFC interconnect application

• Decrese of Cr۲O۳ growth at presence of Co-La۲O۳ composite coating

• Effect of Co-Y۲O۳ composite coating on oxidation activation energy of AISI ۴۳۰ steel

• Investigation of flexural modulus of cyanate ester/carbon fiber composite at high temperature

• Effect of PCA addition on the hardness and shear strength of A۰.۲۵CoCuMnNi high entropy alloy

• Feasibility of the Manufacturing Process of Joint Stabilizers Using ۳D Printing

• Thermo-mechanical properties of carbon/phthalonitrile composite at high temperatures

• Effect of loading rate on the intralaminar fracture toughness of glass/epoxy laminated composites

• Investigation of Interphase Cohesive Properties in Single-Fiber Glass/Epoxy Composite Using Tensile Test and FEM

• Investigating the effect of interphase region on the elastic modulus of metal/graphene nanocomposites

• Prediction of elastic modulus of polymer/carbon nanotube nanocomposites by mean field method

• Plant-Based Biocomposites of Poly (lactic acid)/Rice Straw/Soybean Oil: Effect of Eco-friendly Boric Acid Pulping and Compatibilization on Properties

• Investigation of the Effect of TiO۲ NPs and PEG on the Performance of PAN Nanocomposite Ultrafiltration Membranes

• Cyclodextrin-Metal–Organic Framework (CD-MOF) as efficient carrier for sustained drug delivery

• Low-energy impact response of rubberized cork sandwich structures with glass face sheets

• The Experimental Investigation of Low-Velocity Impact on Sandwich Structures with a Cork Core and Basalt Face Sheets

• Low Velocity Impact Behaviour of Glass- and Basalt-Reinforced Vinyl Ester Composites

• Comparison of buckling capacity in CFRP composite plate and Hemp-Epoxy composite plate

• Estimation of burst pressure of type IV composite pressure vessels using various damage criteria for different composite layup

• Development of MXene/PEDOT:PSS nanocomposite for electrochemical applications

• Mixed-Mode (I/II) Fracture of Glass/PA۶ Thermoplastic Composites Using Image Based Correlation Methods

• Effect of sintering temperature on the microstructure and hardness of Al ۶۰۶۱ matrix composites reinforced with ۵vol.% of AlFeCuCrNi high-entropy alloy

• Effect of stainless steel ۳۰۹ (SS) reinforcing particles addition on the microstructure, porosity and hardness of Al ۶۰۶۱/SS composites

• Using Nanocomposites in the Heat Transfer System of Li-ion Battery Packs of Electric Vehicles

• Design of glass/epoxy composite stacking using machine learning algorithms

• Morphological Evaluation of Conductive Polymer Blends by EIS measurements

• Defects detection in PTFE using VMD analysis and Infrared Thermography

• Nondestructive Testing of PCTFE panels using Infrared Thermographic Signal Reconstruction and image processing

• Bio-composites of Polylactic acid/Polyethylene glycol/ Cellulose Nanocrystals for Drug Release Applications

• Adsorption of Methyl Orange from Aqueous Solution Using Polypyrrole/Andalusite Nanocomposite

• Adsorption of Crystal Violet Dye from Aqueous Medium Using Alginate/Acrylamide/Graphene Oxide Composite Hydrogel

• Optimization of the laminated composite beam with box section under pure shear load

• Surface entrapment of hydroxyapatite on ۳D printed polylactic acid interference screws for biomedical application

• Examining Internal Defects in ۳D FML Composites with Cork Core Using Active Thermography

• Rheology and Viscoelastic Behavior of MWCNT-Reinforced EPDM/SBR Nanocomposites

• Investigating joint failure mechanisms in continuous ultrasonic welding of GF/PA۶ thermoplastic composites

• Investigation of the effect of using an energy director on the quality of static ultrasonic welding of CF/PA۶ thermoplastic composite

• Tensile Properties of Vacuum Infusion and Hand Lay-Up Processed Glass Reinforced Composites

• Design and stress analysis of the protective rod of a rail-car bogie bolster made of hybrid metal and carbon/epoxy composites under low-velocity impact

• Numerical Strength Analysis of Fall Protection Loads on the ۲.۵ MW MAPNA Wind Turbine Nacelle Cover

• Advanced plant-derived wound dressing with enhanced healing properties

• Development of a honey-based bilayer wound dressing: a novel strategy for effective wound recovery

• Novel Experimental Approach to Enhancing the Tensile Properties of GFRP Laminates through Steel Wire Reinforcement

• Comparative Experimental Study of Open Hole GFRP and Aluminum Plates under Tensile Loading

• Effect of carbon and boron addition on physical and mechanical properties of aluminum metal matrix composite, a simulation study

• A novel Taguchi-based tabular neural network (TabNet) model for elastic anisotropic short fiber reinforced composites

• Addition of Graphene Content on Silicone-Epoxy Nanocomposite: Hydrophobicity, Adhesion, and Hardness

• Experimental Study on Foam Density Influence in ۳D-Printed Foam-Filled Sandwich Beams Under Flexural Loading

• Study on The Prevention of Laminated UPVC Profiles from Deformation by Simultaneous Decrease in Heat Buildup (HBU) and Enhancement of Their Heat Deflection Temperature (HDT)

• A novel polymeric nanocomposite based on MXene toward EMI shielding material: a Review paper

• An Ablative EPDM based nanocomposites : A Review Paper

• MXene based polymeric nanocomposites as Promising Dielectriec material: A Review Paper

• Investigating the impact of different boundary conditions on the dynamic behavior of a composite panel

• A case study for mechanical behavior of lattice reinforced cementitious composites under uniaxial compression

• Numerical Simulation of Cone-Jet Formation for processing pol-ymeric particles using Electrohydrodynamic Atomization tech-nique

• Fabrication of Nanocomposites Based on PANI and P۳HT by Crystallization

• Application of Carbon-based Nanocomposites for Stability Enhancement of Polymer Solar Cells

• Investigation of the effect of shape memory alloys on Pressure capacity of polymer composite Pipes

• Experimental Comparison of Damage in Fiber-Metal Laminates with Different Layer Arrangements Subject to Static Loading

• A numerical investigation of Newtonian and non-Newtonian fluid-filled nested hyperelastic structures under low-velocity impact loading

• Design and fabrication of a flexible battery fatigue tester to investigate the effect of geometrical parameters on electrochemical performance

• An analytical investigation on lithium-ion battery electrode electrical conductivity using micromechanics

• Comparative analysis of re-entrant honeycomb and star-shaped auxetic meta-structures: energy absorption and Poisson's ratio performance

• Stress Analysis of Coated Thin Foils in Flexible Batteries under Static Bending Load: A Finite Element Approach

• Influence of Printing Parameters on ۴D-Printed Samples

• Improving lightning strike protection by through-thickness direction fibers in ۳D CFRP composites using woven carbon fibers and nanoparticles

• Detection of Transverse Cracking Damage in GFRP by Acoustic Emission and Digital Image Correlation Techniques

• Anisotropy of thin metal foils used in flexible electronics

• Strain-based failure criteria utilizing the modified maximum strain

• Effect of fabrication method on electromagnetic properties of nanocomposites based on MWCNTs for RCS reduction

• Numerical study of low-velocity impact on GLARE laminates based on elasticity concepts

• Evaluating Shape Memory Properties of Recycled PET and HDPE vs PET with Carbon Fibers

• Statistical analysis of fatigue life of laminated composites using artificial intelligence

• The effect of grid-box material on energy absorption of shear thickening fluid-filled hyperelastic structure: A numerical study

• Mechanical characterization of thin-walled Al-honeycomb core sandwich structures reinforced thin-ply carbon-glass fiber facings

• Quasi static indentation of fully polypropylene sandwich panel

• The Impact of Projectile Velocity on the Ballistic Performance of Layered Composites Consisting of Aluminum, Glass Epoxy Composite, and Alumina-Reinforced Elastomer

• Localized Impulsive Response of Aluminum Three-Layered Sandwich Cylinders with Auxetic Core

• Parametric Stability of Fiber Metal Laminate Cylindrical Shells Under Harmonic Axial Loads

• On the comparison between Selenium penetrating glue and composite patch for enhancing fracture resistance of aluminum alloy

• Comparison of Different Fiber Distribution Models in Vibration of Functionally Graded Nanocomposite Cylindrical Shells

• Vibration Analysis of Nanocomposite Cylindrical Shells Reinforced with Randomly Distributed Wavy Carbon Nanotubes

• In-situ growth of binder-free copper-zinc oxide Nanocomposite to enhance supercapacitor electrode performance

• A nature-inspired pattern for improvement in-plane compression of honeycomb structures

• A chiral-based topology for improvement the mechanical properties of auxetic structures

• Application of biodegradable polymeric composites in cartilage tissue regeneration using the electrospinning approach

• Development of metal-based composites with anti-inflammatory properties for joint regeneration

• Creep behavior of KER ۸۲۸ epoxy resin reinforced by MWCNT: experimental approach

• Experimental Investigation of the Effect of Adding MWCNT on Crack Growth in Mode III Fracture of Adhesive Joints

• Investigating the Fe-Cu-Ni composite formation using elemental powders

• Thermodynamic Investigation of Possible Composite Compound formation from SiO۲-Al۲O۳ Reaction

• Investigation of TiO۲-Al۲O۳ Composite, Applications, Thermodynamics, and Producible Compounds

• An Experimental Investigation of the Creep Behavior of Single-Lap Adhesive Joints with PMMA Sheets

• Numerical Investigation of Tensile Properties of GFRP Composites Reinforced with Stainless Steel Wires

• Predicting Fatigue Behavior of Glass-Epoxy Composites with Initial Damage

• Degradation and Biocorrosion of Composite Materials inBiomedical Implants: A Comprehensive Review of Mechanisms and Applications

• Optimization and Simulation of Energy Absorption in Composite Propeller Under High Speed Impact

• Analysis of Energy Absorption in Composite Sandwich Panels with Different Core Structures Under Impact Loading